Abstract

Characterization of structured soils by in-situ tests cannot be interpreted with success by applying the methodologies dedicated to sedimentary soils, due to the presence of cemented structures that deeply influences its mechanical behaviour, deviating from Classical Soil Mechanics concepts. From the shear strength point of view, structured soils are represented by two parameters that must be derived simultaneously (cohesion intercept and angle of shearing resistance), which is only possible to achieve in tests that measure more than one parameter, such as DMT, CPTu or PMT tests. In its turn, deformability of structured soils is characterized by 2 yield points, one related with beginning of weak bonds yield (first yield) and another one related with the complete breakage of the bond structure (bond yield or gross yield), which are not present in de-structured soils. As consequence, moduli decay curves are more pronounced than those typically displayed in sedimentary soils. The research based in Portuguese granitic environs tested by (S)DMT has shown its usefulness in the characterization of these structured materials. The whole research frame included the characterization of several sites by means of CPTu and DMT tests, laboratorial testing, a calibration apparatus where DMTs were performed in artificially cemented soils closely controlled by triaxial and other laboratorial tests and several sets of SDMT, PMT, CPTu and triaxial tests performed in a high-quality experimental site (IPG). The accumulated experience arising from these experimental frames will be summarized and discussed in the present paper.

Abstract

Field and laboratory testing was carried out for the construction of a 100 m long cable stayed bridge situated in the foothills of the Alps in the south of Germany, a region dominated by deep post-glacial, fine-grained sediments. Due to the sensitivity and associated challenges with retrieving undisturbed soil samples in situ tests and their evaluation proved to be essential for the geotechnical design of the bridge foundation. This contribution focuses on the analytical and numerical interpretation of Cone Pressuremeter Tests (CPM). The non-linear 𝐺-𝛾 relationship and undrained shear strength (using both the limit pressure and reverse plasticity contraction analysis) were determined analytically. Numerical investigations were carried out as verification using both the Finite Element method (FEM) using both 1D (cavity expansion) and 2D simulations (where the penetration of the probe was modelled) as well as using the Finite Difference (FD) method. 2D simulations demonstrated that the assumption of the cylindrical cavity expansion is appropriate for modelling the CPM tests. The interpreted undrained shear strength showed good agreement with other field tests, including CPTu, vane shear (FVT) and seismic cone penetration (SCPT) tests, as well as with the results of laboratory tests on disturbed samples. CPM tests with strain rate jumps were conducted during pressuremeter expansion, wherewith it was possible to quantify the viscous response of the soil. Based on the holistic interpretation of the field and laboratory results involving both numerical simulations and analytical methods the parameters for the material model Viscohypoplasticity were calibrated.