Abstract

The Cone Penetration Test (CPTu) can be used to evaluate the soil behaviour and properties through correlations (empirical and/or analytical), and the results must be compared to laboratory tests to be validated. This paper presents the evaluation of the effective friction angle (φ’) of a stiff over-consolidated Brazilian clay based on CPTu data and laboratory tests characterization, such as index properties, and the comparison of the effective shear strength parameters obtained by triaxial tests. Based on CPTu data, the soil was classified using the Soil-Behaviour Type Classification System (SBTn) proposed by Robertson (2016), and properties such as over-consolidation ratio (OCR) and the effective friction angle were determined using well-known correlations such as Chen & Mayne (1996) and Ouyang & Mayne (2019). The shear response defined by CPTu was compared to the results of isotropic consolidated triaxial compression tests (CIUC). The results showed mainly a clay-like behaviour based on the CPTu data, in agreement with the laboratory characterization, which indicated high plasticity. Regarding the shear response, both the triaxial test and the CPTu data indicated dilative behaviour under shear. Furthermore, the effective friction angle obtained from the triaxial test and the CPTu data were similar depending on the OCR used in the equation, demonstrating the applicability of the adopted methodologies for the Brazilian stiff over-consolidated clay. Finally, based on CPTu data it is proposed a complement of the SBTn developed by Robertson (2016) with OCR isolines.

Abstract

The evaluation of in-situ behaviour, strength and compressibility of a soil profile is routinely performed by geotechnical engineers through field tests, such as the seismic piezocone penetration test (SCPTu), the flat dilatometer test (DMT) and the field vane shear test (FVT). This paper aims to compare the results of a CPTu, DMT and FVT to evaluate an organic alluvium soil in terms of: i) in-situ soil behaviour classification, ii) undrained shear strength and iii) stress history. To compare and complement the in-situ results, laboratory tests were carried out to determine the grain-size distribution, the Atterberg Limits, the pre-consolidation pressure, the organic content and the undrained shear strength under isotropic consolidation triaxial test (CIUC). The results showed that the soil evaluated herein exhibited a clay-like behaviour based on the classification system of both tests (DMT and SCPTu), which agrees with the laboratory characterization. Furthermore, the OCR (overconsolidation ratio) calculated from the SCPTu and DMT also shows a convergence with the values determined from laboratory tests. The SCPTu performed in this soil was predominantly undrained and enabled the calculation of undrained shear strength. Based on this, the methodologies based on Nkt and N∆u (from SCPTu) were compared with the undrained shear strength from the FVT and that obtained from DMT, based on the KD parameter. Finally, a comparison is presented to discuss the influence of shear mode in the undrained shear strength and the applicability of the methodologies used to evaluate the soil behaviour and the stress history.

Abstract

Self-boring pressuremeter (SBPM) tests are widely used in site investigations, due to their distinct advantage to measure the shear stress-strain-strength properties of the surounding soil with minimum disturbance. The measured pressuremeter curve can be interpreted using analytical solutions based on the long cylindrical cavity expansion theory with relatively simple constitutive models. However, SBPM tests are strongly affected by the soil behavior and details of installation procedure. In addition, the derived parameters for clays (e.g. undrained shear strength, and shear modulus) are affected by a number of state variables such as overconsolidation ratio, and stress level. In this paper, SBPM tests are investigated using finite element analysis and the MIT-S1 model, to consider complex soil behavior more realistically. SBPM tests in K0-consolidated Boston Blue Clay at different OCRs are simulated in axial symmetric and plain strain conditions, consistent with the assumptions used in analytical solutions. The derived undrained shear strength from both contraction and expansion curves are compared with theoretical values from stress-strain curves, to evaluate the reliability of the derived parameters from the SBPM tests.