Abstract

The MOSTAP sampling apparatus is a popular tool in geotechnical investigation, since MOSTAP sampling can be done efficiently and cost effectively with the same rig used for CPT testing. Although few publications exist discussing the nuances and application of the MOSTAP sampler in practice, it is generally found that the MOSTAP sampler provides lower quality undisturbed samples when compared to piston tube or block samples. This paper discusses the experiences and learnings from geotechnical investigations where the MOSTAP sampler was employed in platinum and discard sand tailings in Southern Africa. A comparison between different sampler diameters at the same site showed significant improvements in sample recovery with larger diameter samplers. Ancillary equipment such as a core catcher and nylon stockings have significant effects on sample recovery and quality. The soil type and degree of saturation of samples also have a significant effect on sample recovery and sample quality. Transportation and storage of samples were identified as major contributors in moisture loss and sample disturbance. Even with the potential challenges in obtaining a representative sample at depth, MOSTAP samples are shown to be greatly beneficial in evaluating a soil profile and density determination with high confidence, especially when paired with index tests. The opportunity is identified where diligent sample measurement and tracking can provide reliable and invaluable information about a relevant soil stratum. Advanced laboratory testing (e.g., triaxial and oedometer tests) is not recommended on undisturbed MOSTAP samples, these should rather be remolded for critical state line testing, if relevant.

Abstract

In this paper, a new innovative method of geotechnical investigation applicable to seafloor is proposed. This method is the improved version of Sampling and Cone Penetration Test (S&CPT) to evaluate geotechnical properties by Cone Penetration Test (CPT) while collecting continuous samples quickly and inexpensively for offshore geotechnical investigations. In the previous study, demonstration tests on soft cohesive soil were conducted, and some problems were found. The purpose of this study is to modify the sampler to improve penetrability, sampling performance, workability and to examine the applicability for cohesionless soils. Using the improved samplers, demonstration tests were conducted at two sand sites (loose and medium-dense) in Japan. The results of each test were used to examine: (1) sampling performance, and (2) workability. As a result, the following conclusions are drawn: 1) In loose sand, sampling of several meters is possible. In medium-dense sand, the same level of sampling may be possible by providing an appropriate shoe to prevent blockage at the sampler tip. 2) The workability of the proposed apparatus is very high compared to the conventional Cone Penetration Test and Standard Penetration Test.

Abstract

This paper explores the effects of the storage time on the engineering properties of Ballina clay, an estuarine silty clay that represents the soft soil deposits encountered along the eastern and southern Australian coastlines, which serves as foundation material for most of the country’s transport and energy infrastructure. An experimental program was carried out to evaluate the variation in soil compressibility and soil shear strength for tube specimens retrieved with an open sampler (Shelby tube) as well as an Osterberg fixed-piston sampler. Mechanical parameters obtained from tests performed immediately after sampling are compared against those measured over a period of 1 year, to assess the influence of the storage time. Results indicate that long-term storage has small influence on the quality of Ballina clay specimens in comparison with the mechanical disturbance caused during tube penetration and extraction, which is controlled by the sampler type.