Abstract

Castellfollit de la Roca village (Catalonia, NE of Spain) stands on top of a basaltic cliff affected by rockfalls that are causing the retreat of the slope and the risk of undermining the buildings. So far, remote sensing techniques have been applied. They have detected centimetric precursory movements of toppling in basaltic columns, and unnoticed rockfalls of tiny volume as well. However, rockfalls of remarkable magnitude caused by other mechanisms have occurred at the foundation level of some houses, without any precursor movement detected by remote sensing techniques. In order to gather information from these events, a priority sector has been instrumented with a geotechnical network of crackmeters, tiltmeters and thermistors to monitor the thermo-mechanical behavior of the rock mass. Readings from the sensors have been automated through a wireless network based on Loadsensing nodes and gateway connected by LoRa technology. Tiltmeters are all-in-one devices of sensor and logger operating in dynamic mode. This system enables the detection of events and sending alert messages in real time. To receive reliable alerts for risk management, suitable thresholds have to be defined, based on the knowledge of the studied phenomena at the particular scenario. This paper presents the system set up and the threshold analysis through the observation of the cliff behavior on the daily and seasonal cycles registered during the first year of operation.

Abstract

In August 2021, landslides occurred on the slope of the Cortinas sector over an area of more than three kilometers, which affected electrical towers, a national vehicle highway, an oil pipeline and a gas pipeline. Currently, these infrastructures have limitations in their operation, generating significant economic losses and therefore, in the case of the gas pipeline, the construction of a HDD of two thousand meters in length at depths of up to one hundred meters is proposed, with the purpose of being able to bypass the zones unstable and restore transportation to normal conditions. The design and construction of said work constitutes a challenge, since the project area has very special geological conditions, since the hillside deposits are very susceptible to failure and there is apparently a stress tensor of an active fault that directly affects the stability of the area. The projected HDD crosses a ravine and a slope with steep topography with difficult access, as well as different layers of sedimentary rock with intercalations, which are folded and highly fractured and saturated with water. These special conditions generated difficulties and opposed the completion of several attempts by other HDDs, but taking into account that this alternative constitutes basically the only solution from a technical point of view, it was necessary to carry out some borehole and multiple seismic geophysical tests and geoelectrical that would allow defining a detailed stratigraphic profile to be able to analyze the constructive feasibility and, in such case, the most appropriate method, as well as the geomechanically characterization of the rocks, since according to the numerical modeling they indicate that the stability of the drilling may be affected due to plasticization at its limits, with detachments of rock fragments and jamming of the tools necessary for its construction.