One of the most important challenges in the automotive field is to deal with the new regulations regarding the material’s recycling, following the guidelines of the Circular Economy, without losing properties. The hybridization of parts of recycled material combined with continuous fiber inserts could be a solution to this problem. Within the framework of the ZeKonp project, a study and optimization of the manufacturing process variables of compression moulding of hybrid structures with unidirectional tape inserts. has been carried out
The starting material has been a plate of a semi-finished hybrid of GMT material obtained by scraps of UD tape from production waste. The reinforcement has been placed with a Multilayer automatic taping equipment.
In order to optimize the process, variables such as the arrangement of the material, temperature and compaction pressure, the strategy and speed of deposition of the strips and the welding process of the materials have been studied.
In addition to the reuse of the materials, the process and life cycles of the final product has also been taken into account in order to reduce the environmental impact throughout its life cycle
Abstract
One of the most important challenges in the automotive field is to deal with the new regulations regarding the material’s recycling, following the guidelines of the Circular Economy, without losing properties. The hybridization of parts of recycled [...]
The conception of structural components using thermoplastic composite materials faces a dilemma when selecting the material/manufacturing process pairing. Continuous fiber-reinforced composites offer the best properties, but their design freedom is limited to shell-type parts. On the other hand, manufacturing processes for discontinuous fiber, such as injection (LFT) and forging (GMT), allow the production of complex geometries, but their mechanical properties are substantially lower. In fact, LFT and GMT are important in the current automotive industry, but their applications are limited to semi-structural components or internally complex geometries whose functionality is more focused on function integration rather than supporting high mechanical loads. The hybridization of discontinuous fiber composites with continuous fiber materials presents itself as a promising approach to achieve a synergistic effect from both technologies.
In this study, the impact behavior of glass fiber-reinforced polyamide forged plates (GMT) was characterized, along with their hybridization with unidirectional carbon reinforcements. In the first phase, the effect of the processing temperature was investigated, concluding that increasing the temperature promotes the compaction between the two materials, resulting in improved impact resistance. Specifically, a 14% increase was observed in both maximum force and dissipated energy. In the second phase, the effect of hybridization with unidirectional tapes as reinforcement was analyzed, showing the same positive effect. The hybridization led to a 20% improvement in maximum force and a 36% increase in dissipated energy.
Abstract
The conception of structural components using thermoplastic composite materials faces a dilemma when selecting the material/manufacturing process pairing. Continuous fiber-reinforced composites offer the best properties, but their design freedom is limited to shell-type parts. [...]