Estimation of Pore Pressure for Unsaturated-Saturated Bentonite Sand Mixture

Abstract

To investigate thermal hydration mechanical chemical couple phenomena is an important issue of the high-level radioactive waste disposal and a key indicator of artificial barrier system. Major objectives of the thermal and mechanical site characterization include the status of the environmental. Several research reports are aimed at the barrier layers for heating from radioactive waste disposal. This study appears the occurrence of the pore pressure under heat conditions for bentonite and bentonite-sand mixture material, which are completely undrained condition and unexhausted condition. It is considered that mechanics of pore pressure in macro-micro void structure due to heating-cooling repetition. A thermal chamber is used in heating method, which have high specification with accurate controlling sensitivity. The maximum temperature is 80 degrees Celsius temperatures. The prepared specimens are unsaturated specimens and saturated specimens, and silica sand are mixture into three different bentonites that various dry densities are required. Two different solutions are prepared for saturated specimen, which are distilled water and salinity water with concentration of 3.5 %. The specimens are placed into a thermostat oven, and heating application is applied isotropic conductivity. The obtained results are significant as followings; The measured pore pressures are obviously with increment of temperature, and the sand mixture ratio is small influence factor. Also, large por fluid pressures are produced for saturated condition that indication of small pore fluid pressure is verified for unsaturated specimen comparison with saturated specimen.

Full Paper