Car brakes appear to be a significant atmospheric pollutant source, with a contribution to total non-exhaust traffic-related PM10 emissions being estimated at approximately 55% in big cities and urban environments (Bukowiecki et al., 2009). Brake wear particle emissions of a minivan running on a chassis dynamometer were measured using a custom sampling system, positioned close to the braking system, under different initial speeds (30 km/h and 50 km/h), deceleration rates (0.5 m/s2, 1.5 m/s2, 2.5 m/s2), and ambient temperatures (0 °C, 15 °C and 25 °C). Braking from 50 km/h to full stop, results in 40–100% more particles compared to 30 km/h, depending on the deceleration rate. It was also found that only 9–50% of the total particles emitted, are released during the braking phase and therefore the most significant amount is released on the following acceleration phase. High brake pad temperature results in a bimodal distribution with the first peak being at 1 μm and the second falling at the nanometer scale at 200 nm. The ambient temperature appears to have a negligible effect on the particle generation.
Document type: Article
The different versions of the original document can be found in:
under the license http://creativecommons.org/licenses/by-nc-nd/4.0/legalcode
DOIS: 10.5281/zenodo.1486601 10.5281/zenodo.1486602 10.1007/s40825-018-0105-7
Published on 01/01/2018
Volume 2018, 2018
DOI: 10.5281/zenodo.1486601
Licence: Other
Are you one of the authors of this document?