Abstract

Simplified methods for seismic liquefaction assessment based on the flat dilatometer test (DMT), in which the liquefaction triggering curve is defined based on the horizontal stress index (KD), have been proposed over the years. One major drawback of the existing methods, valid for clean sand, is the lack of a correction factor for the fines content. An updating of the empirical relationship CRR-KD proposed by Chiaradonna and Monaco (2022) to incorporate the effects of the fines content is currently under development and validation. This paper illustrates the results obtained from application of the new method at the site of San Carlo – Terre del Reno (Ferrara) located in the Emilia-Romagna plain (Italy), where widespread liquefaction occurred in the 2012 seismic sequence. A comprehensive site characterization from previous insitu and laboratory tests carried out by various research groups is available for the sand, silty sand and sandy silt deposits in the San Carlo area. The performance of the new CRR-KD curve accounting for the fines content effect is compared with that obtained by adopting the “clean sand” curves proposed by Chiaradonna and Monaco (2022), as well as with that obtained by using the CPT-based method by Boulanger and Idriss (2014). Even though verified only for specific Italian soils in this area and requiring further field validation, the proposed approach appears as promising to improve the DMTbased liquefaction assessment in silty sands.

Full Paper

The PDF file did not load properly or your web browser does not support viewing PDF files. Download directly to your device: Download PDF document
Back to Top

Document information

Published on 07/06/24
Submitted on 07/06/24

Volume Innovation in DMT & SDMT testing, 2024
DOI: 10.23967/isc.2024.142
Licence: CC BY-NC-SA license

Document Score

0

Views 0
Recommendations 0

Share this document

claim authorship

Are you one of the authors of this document?