An Integrated Modeling Approach that Combines Elastic Amplification and Rocking Analysis for Seismic Assessment of a Masonry Tower

Abstract

Failure of masonry structures during earthquakes often occurs via specific, well- documented collapse mechanisms, many of which involve partial collapse of the structure well above ground level. Consequently, the elastic response of the structure needs to be considered, which in the case of historic structures such as bell towers and churches often requires modal analysis using finite element models - the generation of which can be labour-intensive and time- consuming. This paper presents a new integrated modeling approach which combines finite element analysis with rocking dynamics in order to model the seismic response of complex structural geometries in a computationally-efficient manner. The modeling strategy is implemented within COMPAS - an open-source computational framework that provides geometry processing independent of CAD software, and is incorporated within the broader framework of a tool being developed for the seismic collapse assessment of masonry structures. The framework of this new tool is first outlined, and the utility of the new modeling approach then demonstrated through application to the seismic assessment of a historic masonry tower in North-Eastern Italy. The analysis results indicate that for the level of seismic hazard expected on site, failure of the tower is most likely to occur via overturning collapse of one of the rampart elements. The importance of accounting for elastic amplification effects, as well as the influence of varying boundary conditions on the dynamic response, is also demonstrated.

Full document

References

[1] D’Ayala, D. and Speranza, E. An Integrated Procedure for the Assessment of Seismic Vulnerability of Historic Buildings. In: Proceedings of the 12th European Conference on Earthquake Engineering, (2002).

[2] PCM-DPC MiBAC. Model A-DC Scheda per il rilievo del danno ai beni culturali - Chiese. (2006).

[3] Housner, G.W. The Behavior of Inverted Pendulum Structures during Earthquakes. Bull. Seismol. Soc. Am. (1963) 53: 403–417.

[4] Mauro, A., de Felice, G. and DeJong, M.J. The relative dynamic resilience of masonry collapse mechanisms. Eng. Struct. (2015) 85:182–194.

[5] DeJong, M.J. and Dimitrakopoulos, E.G. Dynamically equivalent rocking structures. Earthq. Eng. Struct. Dyn. (2014) 43:1543–1563.

[6] Makris, N. and Vassiliou, M.F. Planar rocking response and stability analysis of an array of free-standing columns capped with a freely supported rigid beam. Earthq. Eng. Struct. Dyn. (2013) 42:431–449.

[7] Priestley, M.J.N. Seismic behaviour of unreinforced masonry walls. Bull. New Zeal. Soc. Earthq. Eng. (1985) 18:191–205.

[8] Casarin, F. and Modena, C. Seismic Assessment of Complex Historical Buildings: Application to Reggio Emilia Cathedral, Italy. Int. J. Archit. Herit. (2008) 2:304–327.

[9] Castellazzi, G., Gentilini, C. and Nobile, L. Seismic Vulnerability Assessment of a Historical Church: Limit Analysis and Nonlinear Finite Element Analysis. Adv. Civ. Eng. (2013) 2013:1-12.

[10] de Felice, G., Genoese, A., Genoese, A. and Malena, M. Seismic Vulnerability Assessment of the Casamari Gothic Church. In: Proceedings of the 15th International Conference on Civil, Structural and Environmental Engineering Computing, (2015).

[11] Van Mele, T. et al. COMPAS: A framework for computational research in architecture and structures. (2017-2020).

[12] Mehrotra, A. and DeJong, M.J. A CAD-interfaced dynamics-based tool for analysis of masonry collapse mechanisms. Eng. Struct. (2018) 172: 833–849.

[13] Liew, A. and Mendez Echenagucia, T. compas_fea: Finite Element Analysis package for the COMPAS framework. (2017).

[14] McKenna, F., Fenves, G.L., Scott, M.H. and Jeremic, B. Open system for earthquake engineering simulation (OpenSees). (2000).

[15] Robert McNeel & Associates. Rhinoceros 5. (2014).

[16] Klöckner, A. MeshPy. (2008).

[17] Si, H. TetGen, a Delaunay-Based Quality Tetrahedral Mesh Generator. ACM Trans. Math. Softw. (2015) 41: Article 11.

[18] Valente, M. and Milani, G. Seismic assessment of historical masonry towers by means of simplified approaches and standard FEM. Constr. Build. Mater. (2016) 108:74–104.