Juan Cante Profile : Scipedia

Documents published in Scipedia

Generation of segmental chips in metal cutting modeled with the PFEM
J. Prieto, J. Carbonell, J. Cante, J. Oliver, P. Jonsén

Computational Mechanics (2018). Vol. 61 (6), pp. 639-655

Abstract
The Particle Finite Element Method, a lagrangian finite element method based on a continuous Delaunay re-triangulation of the domain, is used to study machining of Ti6Al4V. In this work the method is revised and applied to study the influence of the cutting speed on the cutting force and the chip formation process. A parametric methodology for the detection and treatment of the rigid tool contact is presented. The adaptive insertion and removal of particles are developed and employed in order to sidestep the difficulties associated with mesh distortion, shear localization as well as for resolving the fine-scale features of the solution. The performance of PFEM is studied with a set of different two-dimensional orthogonal cutting tests. It is shown that, despite its Lagrangian nature, the proposed combined finite element-particle method is well suited for large deformation metal cutting problems with continuous chip and serrated chip formation.
Abstract
The Particle Finite Element Method, a lagrangian finite element method based on a continuous Delaunay re-triangulation of the domain, is used to study machining [...]
- 3
- read
A plasticity model for simulation of industrial powder compaction processes
J. Oliver, S. Oller, J. Cante

Int. J. Solids and Structures (1996). Vol. 33 (20-22), 3161-3178

Abstract
A constitutive model, based on large strain plasticity, for simulation of industrial powder compaction processes is presented. The elastic response is stated in terms of a hyperelastic model based on a hookean elastic free energy. Plastic response is defined in terms of a two parameter yield surface that evolves in terms of the relative density. Two different flow rules are considered and tested in front of some available experimental results. Application to the simulation of an actual powder-metallurgy compaction process is also shown.
Abstract
A constitutive model, based on large strain plasticity, for simulation of industrial powder compaction processes is presented. The elastic response is stated in terms of a [...]
- 2
- read

Articles (Documents not available in Scipedia)

The domain interface method in non-conforming domain decomposition multifield problems
O Lloberas-Valls, M Cafiero, J Cante, A Ferrer, J Oliver

Computational Mechanics 59 (4), 579-610, 2017
Continuous chip formation in metal cutting processes using the Particle Finite Element Method (PFEM)
JM Rodríguez, JM Carbonell, JC Cante, J Oliver

International Journal of Solids and Structures, 2017
Computational design of engineering materials: an integrated approach for multiscale topological structure optimization
J Oliver, J Cante, A Ferrer

Presentations to the XIII International Conference on Computational ..., 2016
Vademecum-based approach to multi-scale topological material design
A Ferrer, J Oliver, JC Cante, O Lloberas-Valls

Advanced Modeling and Simulation in Engineering Sciences 3 (1), 23, 2016
The domain interface method: a general-purpose non-intrusive technique for non-conforming domain decomposition problems
M Cafiero, O Lloberas-Valls, J Cante, J Oliver

Computational mechanics 57 (4), 555-581, 2016
The particle finite element method (PFEM) in thermo‐mechanical problems
JM Rodriguez, JM Carbonell, JC Cante, J Oliver

International Journal for Numerical Methods in Engineering, 2016
On multi-scale structural topology optimization and material design
A Ferrer, JC Cante, J Oliver

Proc. of the Congress on Numerical Methods in Engineering (CMA_2015), Lisboa, 2015
On the numerical modelling of machining processes via the particle finite element method (PFEM)
JM Rodríguez, JCC Terán, J Oliver

International Center for Numerical Methods in Engineering, 2015
On the numerical modeling of granular material flows via the Particle Finite Element Method (PFEM)
C Dávalos, J Cante, JA Hernández, J Oliver

International Journal of Solids and Structures 71, 99-125, 2015
On the Modelling of Granular Flows in Industrial Applications via the Particle Finite Element Method
CE Dávalos, JC Cante, JA Hernández, J Oliver

International Center for Numerical Methods in Engineering, 2014
PFEM-based modeling of industrial granular flows
J Cante, C Davalos, JA Hernandez, J Oliver, P Jonsén, G Gustafsson, ...

Computational Particle Mechanics 1 (1), 47-70, 2014
High-performance model reduction techniques in computational multiscale homogenization
JA Hernández, J Oliver, AE Huespe, MA Caicedo, JC Cante

Computer Methods in Applied Mechanics and Engineering 276, 149-189, 2014
A sensibility analysis to geometric and cutting conditions using the particle finite element method (PFEM)
J Rodríguez, P Arrazola, J Cante, A Kortabarria, J Oliver

Procedia CIRP 8, 105-110, 2013
Finite element modelling of ejection cracks in powder metallurgy die compaction processes: case study
JA Hernández, J Oliver, JC Cante, R Weyler

Powder Metallurgy 55 (1), 36-44, 2012
On the contact domain method: A comparison of penalty and Lagrange multiplier implementations
R Weyler, J Oliver, T Sain, JC Cante

Computer methods in applied mechanics and engineering 205, 68-82, 2012
A robust approach to model densification and crack formation in powder compaction processes
JA Hernández, J Oliver, JC Cante, R Weyler

International journal for numerical methods in engineering 87 (8), 735-767, 2011
On the proper characterization of tooling motions and initial conditions in powder die compaction modeling
JA Hernández, JC Cante, J Oliver, R Weyler

Journal of Materials Processing Technology 211 (8), 1348-1357, 2011
Flow regime analyses during the filling stage in powder metallurgy processes: experimental study and numerical modelling
JC Cante, MD Riera, J Oliver, JM Prado, A Isturiz, C Gonzalez

Granular Matter 13 (1), 79-92, 2011
Numerical modeling of crack formation in powder forming processes
JA Hernández, J Oliver, JC Cante, R Weyler

International Journal of Solids and Structures 48 (2), 292-316, 2011
Tools for Improving PM-Modelling & Simulation: Modelling of Crack Formation in PM Compaction Processes
JA Hernández, JC Cante, J Oliver

European Congress and Exhibition on Powder Metallurgy. European PM ..., 2010
Aplicación del método PFEM a la simulación de procesos de transferencia propios de la industria pulvimetalúrgica
C González, JCC Terán, JOO Oliver

Centro Internacional de Métodos Numéricos en Ingeniería, 2010
Aplicación del método PFEM a la simulación de procesos de transferencia propios de la industria pulvimetalúrgica
JC Cante, C González, J Oliver

Centre Internacional de Mètodes Numèrics en Enginyeria (CIMNE), 2010
A 3D frictionless contact domain method for large deformation problems
S Hartmann, R Weyler, J Oliver, JC Cante, JA Hernández

Computer Modeling in Engineering and Sciences (CMES) 55 (3), 211, 2010
On the numerical resolution of the discontinuous material bifurcation problem
J Oliver, AE Huespe, JC Cante, G Diaz

International journal for numerical methods in engineering 83 (6), 786-804, 2010
A new approach in computational contact mechanics: the contact domain method
JC Cante, S Hartmann, J Hernandez, J Oliver, R Weyler

Centre Internacional de MËtodes NumËrics en Enginyeria (CIMNE), 2009
Particle finite element method applied to granular material flow
JC Cante, X Oliver, R Weyler, M Cafiero, C Davalos

International Conference on Particle-Based Methods, Barcelona, Spain, 2009
Comparison of smoothed particle method and particle finite element method in applied granular flow problems
G Gustafsson, JC Cante, P Jonsén, HÅ Häggblad, R Weyler

Particles: 25/11/2009-27/11/2009, 204-207, 2009
Numerical modeling of crack formation in power compaction processes
JA Hernández Ortega, X Oliver Olivella, C Terán, J Carlos

Universitat Politècnica de Catalunya. Centre Internacional de Mètodes ..., 2009
On Particle Finite Element Methods (PFEM) in dynamic solid mechanics problems
X Oliver Olivella, C Terán, J Carlos, R Weyler Pérez, S Hartmann, ...

COMPDYN 2009, 1-3, 2009
A contact domain method for large deformation frictional contact problems. Part 2: Numerical aspects
S Hartmann, J Oliver, R Weyler, JC Cante, JA Hernández

Computer Methods in Applied Mechanics and Engineering 198 (33), 2607-2631, 2009
A contact domain method for large deformation frictional contact problems. Part 1: theoretical basis
J Oliver, S Hartmann, JC Cante, R Weyler, JA Hernández

Computer Methods in Applied Mechanics and Engineering 198 (33), 2591-2606, 2009
An implicit/explicit integration scheme to increase computability of non-linear material and contact/friction problems
J Oliver, AE Huespe, JC Cante

Computer Methods in Applied Mechanics and Engineering 197 (21), 1865-1889, 2008
Possibilities of particle finite element methods in industrial forming processes
J Oliver, JC Cante, R Weyler, J Hernandez

AIP Conference Proceedings 907 (1), 1484-1489, 2007
Particle finite element methods in solid mechanics problems
J Oliver, JC Cante, R Weyler, C González, J Hernandez

Computational plasticity, 87-103, 2007
A numerical procedure for modeling crack formation in powder compaction based manufacturing processes
J Oliver, JC Cante, JA Hernández

trial 1, 1, 2005
PM Modelling Workshop: Experimental and Numerical Study of the Die Filling Stage in Powder Metallurgy
MD Riera, A Istúriz, JM Prado, JC Cante, J Oliver, C González

European Congress and Exhibition on Powder Metallurgy. European PM ..., 2005
On numerical simulation of powder compaction process: powder transfer modelling and characterisation
JC Cante, J Oliver, C Gonzalez, JA Calero, F Benítez

Powder metallurgy 48 (1), 85-92, 2005
Numerical modelling of powder compaction processes: towards a virtual press
JC Cante

Proceedings of Euro PM2004 Conference, EPMA, 2004
Numerical simulation of powder filling processes using the particle finite element method
J Oliver, JC Cante, C Gonzalez

Proc. of Euro PM2004, 305, 2004
Complete study of the die compaction of a flanged bushing–From the powder characterisation to the validation of numerical simulation
O Coube, L Federzoni, J Cante, M Oldenburg, Y Chen, D Imbault, ...

Proc. Euro PM2003, Valencia 3, 71-76, 2003
Process Modelling: Numerical Simulation of the Compaction Process for a Flanged Bearing
JA Calero, JA Bas, MJ Dougan, F Benitez, JC Cante

European Congress and Exhibition on Powder Metallurgy. European PM ..., 2001
Powder Compaction Modelling & Dienet Thematic Network Open Workshop: A Numerical Tool for the Prediction of Cracks in PM Components
JC Cante, J Oliver

European Congress and Exhibition on Powder Metallurgy. European PM ..., 2001
A stress point algorithm for an elastoplastic model in unsaturated soils
J Vaunat, JC Cante, A Ledesma, A Gens

International Journal of Plasticity 16 (2), 121-141, 2000
Simulación numérica de las etapas de transferencia y prensado del proceso de compactación de pulvimateriales, in ‘IV Congreso de Métodos Numéricos en Ingenierıa’, Eds
JC Cante, J Oliver, R Hernández

R. Abascal, J. Domınguez and G. Bugeda, SEMNI, Spain, 1999
A plasticity model for simulation of industrial powder compaction processes
J Oliver, S Oller, JC Cante

International Journal of Solids and Structures 33 (20-22), 3161-3178, 1996
Numerical simulation of uniaxial compaction processes in powder materials.
J Oliver, S Oller, JC Cante

Métodos numéricos en ingeniería y ciencias aplicadas.: actas del Congreso ..., 1992

information

Submit your paper

Become a journal editor

Create a new collection

Create an organization profile

Open access

Documents published in Scipedia

Generation of segmental chips in metal cutting modeled with the PFEM

A plasticity model for simulation of industrial powder compaction processes

Articles (Documents not available in Scipedia)

The domain interface method in non-conforming domain decomposition multifield problems

Continuous chip formation in metal cutting processes using the Particle Finite Element Method (PFEM)

Computational design of engineering materials: an integrated approach for multiscale topological structure optimization

Vademecum-based approach to multi-scale topological material design

The domain interface method: a general-purpose non-intrusive technique for non-conforming domain decomposition problems

The particle finite element method (PFEM) in thermo‐mechanical problems

On multi-scale structural topology optimization and material design

On the numerical modelling of machining processes via the particle finite element method (PFEM)

On the numerical modeling of granular material flows via the Particle Finite Element Method (PFEM)

On the Modelling of Granular Flows in Industrial Applications via the Particle Finite Element Method

PFEM-based modeling of industrial granular flows

High-performance model reduction techniques in computational multiscale homogenization

A sensibility analysis to geometric and cutting conditions using the particle finite element method (PFEM)

Finite element modelling of ejection cracks in powder metallurgy die compaction processes: case study

On the contact domain method: A comparison of penalty and Lagrange multiplier implementations

A robust approach to model densification and crack formation in powder compaction processes

On the proper characterization of tooling motions and initial conditions in powder die compaction modeling

Flow regime analyses during the filling stage in powder metallurgy processes: experimental study and numerical modelling

Numerical modeling of crack formation in powder forming processes

Tools for Improving PM-Modelling & Simulation: Modelling of Crack Formation in PM Compaction Processes

Aplicación del método PFEM a la simulación de procesos de transferencia propios de la industria pulvimetalúrgica

Aplicación del método PFEM a la simulación de procesos de transferencia propios de la industria pulvimetalúrgica

A 3D frictionless contact domain method for large deformation problems

On the numerical resolution of the discontinuous material bifurcation problem

A new approach in computational contact mechanics: the contact domain method

Particle finite element method applied to granular material flow

Comparison of smoothed particle method and particle finite element method in applied granular flow problems

Numerical modeling of crack formation in power compaction processes

On Particle Finite Element Methods (PFEM) in dynamic solid mechanics problems

A contact domain method for large deformation frictional contact problems. Part 2: Numerical aspects

A contact domain method for large deformation frictional contact problems. Part 1: theoretical basis

An implicit/explicit integration scheme to increase computability of non-linear material and contact/friction problems

Possibilities of particle finite element methods in industrial forming processes

Particle finite element methods in solid mechanics problems

A numerical procedure for modeling crack formation in powder compaction based manufacturing processes

PM Modelling Workshop: Experimental and Numerical Study of the Die Filling Stage in Powder Metallurgy

On numerical simulation of powder compaction process: powder transfer modelling and characterisation

Numerical modelling of powder compaction processes: towards a virtual press

Numerical simulation of powder filling processes using the particle finite element method

Complete study of the die compaction of a flanged bushing–From the powder characterisation to the validation of numerical simulation

Process Modelling: Numerical Simulation of the Compaction Process for a Flanged Bearing

Powder Compaction Modelling & Dienet Thematic Network Open Workshop: A Numerical Tool for the Prediction of Cracks in PM Components

A stress point algorithm for an elastoplastic model in unsaturated soils

Simulación numérica de las etapas de transferencia y prensado del proceso de compactación de pulvimateriales, in ‘IV Congreso de Métodos Numéricos en Ingenierıa’, Eds

A plasticity model for simulation of industrial powder compaction processes

Numerical simulation of uniaxial compaction processes in powder materials.

information

Colleagues

Followers

Bermúdez Guerrero, Laura 113

Calvi, Alessandro 4537

Vielma-Perez, Juan-Carlos 1512

García-Espinosa, Julio 7739

contributions

external references