Documents published in Scipedia

• D1.1 Solvers "stub" implementation of the capabilities to be delivered

  R. Rossi, I. López, C. Soriano

  Open Access Repository of the ExaQUte project: Deliverables (2021). 4

  
  

  Abstract

  The current deliverable describes the initial API available for the solvers. The API is intended to be based on the Kratos Multiphysics fraemework and will evolve during the project. The current deliverable describes the essential features of the interface and provides an initial working implementation to be used as a basis for the future developements. The initial implementation described here is currently operative on the master branch of Kratos. As of the end of July 2018 (moment of handing in of current deliverable) the interface is operative and is being used “in production”. Nevertheless, it still does not fully support the model serialization capabilities that are needed for pyCompSS and HyperLoom. The interface is documented in the project wiki page [wiki]. The same documentation is also presented in the current deliverable.

  Abstract
  The current deliverable describes the initial API available for the solvers. The API is intended to be based on the Kratos Multiphysics fraemework and will evolve during the [...]

  • 18
  •  read

• D1.4 Final public Release of the solver

  F. Nobile, R. Badia, J. Ejarque, L. Cirrottola, A. Froehly, B. Keith, A. Kodakkal, M. Nuñez, C. Roig, R. Tosi, R. Rossi, C. Soriano

  Open Access Repository of the ExaQUte project: Deliverables (2021). 3

  
  

  Abstract

  This deliverable presents the final software release of Kratos Multiphysics, together with the XMC library, Hyperloom and PyCOMPSs API definitions [13]. This release also contains the latest developements on MPI parallel remeshing in ParMmg. This report is meant to serve as a supplement to the public release of the software. Kratos is “a framework for building parallel, multi-disciplinary simulation software, aiming at modularity, extensibility, and high performance. Kratos is written in C++, and counts with an extensive Python interface”. XMC is “a Python library for parallel, adaptive, hierarchical Monte Carlo algorithms, aiming at reliability, modularity, extensibility and high performance“. Hyperloom and PyCOMPSs are environments for enabling parallel and distributed computation. ParMmg is an open source software which offers the parallel mesh adaptation of three dimensional volume meshes.

  Abstract
  This deliverable presents the final software release of Kratos Multiphysics, together with the XMC library, Hyperloom and PyCOMPSs API definitions [13]. This release also [...]

  • 37
  •  read

• D2.2 First release of the octree mesh-generation capabilities and of the parallel mesh adaptation kernel

  A. Martín, L. Cirrottola, A. Froehly, R. Rossi, C. Soriano

  Open Access Repository of the ExaQUte project: Deliverables (2021). 2

  
  

  Abstract

  This document presents a description of the octree mesh-generation capabilities and of the parallel mesh adaptation kernel. As it is discussed in Section 1.3.2 of part B of the project proposal there are two parallel research lines aimed at developing scalable adaptive mesh refinement (AMR) algorithms and implementations. The first one is based on using octree-based mesh generation and adaptation for the whole simulation in combination with unfitted finite element methods (FEMs) and the use of algebraic constraints to deal with non-conformity of spaces. On the other hand the second strategy is based on the use of an initial octree mesh that, after make it conforming through the addition of templatebased tetrahedral refinements, is adapted anisotropically during the calculation. Regarding the first strategy the following items are included: Description of the octree-based AMR kernel with space-filling curves. Description of a outer, wrapping AMR layer supporting FEM needs. Numerical results in a distributed environment. Regarding the second strategy the following items are included: An outline of the anisotropic mesh adaptation algorithm. A description of the state of the art of the implementation. A discussion on the ongoing and future work.

  Abstract
  This document presents a description of the octree mesh-generation capabilities and of the parallel mesh adaptation kernel. As it is discussed in Section 1.3.2 of part B of [...]

  • 21
  •  read

• D1.2 First realease of the softwares

  R. Tosi, R. Amela, M. Nuñez, C. Roig, R. Badia, R. Rossi, C. Soriano

  Open Access Repository of the ExaQUte project: Deliverables (2021). 1

  
  

  Abstract

  This deliverable presents the software release of the Kratos Multiphysics software [3], ”a framework for building parallel, multi-disciplinary simulation software, aiming at modularity, extensibility, and high performance. Kratos is written in C++, and counts with an extensive Python interface”. In this deliverable we focus on the development of Uncertainty Quantification inside Kratos. This takes place in the MultilevelMonteCarloApplication, a recent development inside the software that allows to deal with uncertainty quantification.

  Abstract
  This deliverable presents the software release of the Kratos Multiphysics software [3], ”a framework for building parallel, multi-disciplinary simulation software, aiming [...]

  • 21
  •  read

• D2.4 First Release of the mesh generation/adaptation capabilities

  L. Cirrottola, A. Froehly, B. Keith, S. Warnakulasuriya, R. Rossi, C. Soriano

  Open Access Repository of the ExaQUte project: Deliverables (2021). 12

  
  

  Abstract

  This document presents a description of the parallel mesh adaptation library for the rst actual software release. Regarding the octree mesh-generation capabilities, the reader can refers to Deliverable 2.2. As it is discussed in Section 1.3.2 of part B of the project proposal there are two parallel research lines aimed at developing scalable adaptive mesh renement (AMR) algorithms and implementations. The rst one is based on using octree-based mesh generation and adaptation for the whole simulation in combination with untted nite element methods (FEMs) and the use of algebraic constraints to deal with non-conformity of spaces. On the other hand the second strategy is based on the use of an initial octree mesh that, aftermaking it conformal through the addition of template-based tetrahedral renements, is adapted anisotropically during the calculation.

  Abstract
  This document presents a description of the parallel mesh adaptation library for the rst actual software release. Regarding the octree mesh-generation capabilities, the [...]

  • 0
  •  read

• D8.3 Report on exploitation activities

  C. Soriano, A. Apostolatos, R. Rossi

  Open Access Repository of the ExaQUte project: Deliverables (2021). 13

  
  

  Abstract
  This deliverable describes the  exploitation activities carried our in ExaQUte in the framework of WP9.

  • 0
  •  read

• D8.2 Report on dissemination activities

  C. Soriano, R. Rossi

  Open Access Repository of the ExaQUte project: Deliverables (2021). 14

  
  

  Abstract
  This deliverable descritves the Dissemination activities in ExaQUte 

  • 0
  •  read

• D4.3 Benchmarking report as tested on the available infrastructure

  T. Karasek, S. Böhm, B. Keith, R. Amela, R. Badia, R. Rossi, C. Soriano

  Open Access Repository of the ExaQUte project: Deliverables (2021). 15

  
  

  Abstract

  The main focus of this deliverable is testing and benchmarking the available infrastructure using the execution frameworks PyCOMPSs and HyperLoom. A selected benchmark employing the Multi Level Monte Carlo (MLMC) algorithm was run on two systems: TIER-0 (MareNostrum4) and TIER-1 (Salomon) supercomputers. In both systems, good performance scalability was achieved.

  Abstract
  The main focus of this deliverable is testing and benchmarking the available infrastructure using the execution frameworks PyCOMPSs and HyperLoom. A selected benchmark [...]

  • 0
  •  read

• D7.1 DELIVERY OF GEOMETRY AND COMPUTATIONAL MODEL

  A. Michalski, D. Andersson, R. Rossi, C. Soriano

  Open Access Repository of the ExaQUte project: Deliverables (2021). 7

  
  

  Abstract

  This document describes the industrial application, on which the developments of the project are implemented, and the CFD set-up. The developments are implemented over six analysis cases with increasing complexity starting from a 2D geometry with mean wind inflow to a 3D geometry with turbulent inflow and real-time shape optimization. The application represents the CAARC tall building model, which has served as a benchmark model for many studies since the 1970’s when it was first developed. Base moments (bending and torsional moments) of the building are extracted for validation by comparison of the results with the benchmark study. Page 3 of 19 Deliverable 7.1

  Abstract
  This document describes the industrial application, on which the developments of the project are implemented, and the CFD set-up. The developments are implemented over six [...]

  • 0
  •  read

• D6.2 Report on the calculation of stochastic sensitivities

  S. Ganesh, Q. Ayoul-Guilmard, F. Nobile, C. Soriano, R. Rossi

  Open Access Repository of the ExaQUte project: Deliverables (2021). 2

  
  

  Abstract
  In the following sections, the formulation of a possible stochastic optimisation problem relevant to the ExaQUte project is first presented.

  • 0
  •  read

Articles (Documents not available in Scipedia)

• Odors and gas emissions during the ceramic sintering of sewage sludge: guidelines for industrial implementation

  LV Cremades Oliver, C Soriano Ortiz, JA Cusidó Fàbregas

  TINOS 2015: 3rd international conference on sustainable solid waste …, 2015

• Incorporation of paper sludge in clay brick formulation: Ten years of industrial experience

  JA Cusidó, LV Cremades, C Soriano, M Devant

  Applied Clay Science 108, 191-198, 2015

• Using solid wastes as raw materials in clay bricks

  LV Cremades Oliver, JA Cusidó Fàbregas, C Soriano, MVF Devant Guille

  Nova Science Publishers, 2014

• Description of extreme longevity in the Balearic Islands: Exploring a potential Blue Zone in Menorca, Spain

  JB Soriano, S Fernández Vázquez, S Carretero, MD Puga González, ...

  Geriatrics & gerontology international 14 (3), 620-627, 2014

• Valorization of pellets from municipal WWTP sludge in lightweight clay ceramics

  JA Cusidó, C Soriano

  Waste management 31 (6), 1372-1380, 2011

• Custom formulation of red ceramics with clay, sewage sludge and forest waste

  M Devant, JA Cusidó, C Soriano

  Applied Clay Science 53 (4), 669-675, 2011

• Identification of the origin of odour episodes through social participation, chemical control and numerical modelling

  E Gallego, C Soriano, FX Roca, JF Perales, M Alarcón, X Guardino

  Atmospheric Environment 42 (35), 8150-8160, 2008

• Pollutant Dispersion in a Heavily Industrialized Region: Comparison of Different Models

  MR Soler, S Ortega, C Soriano, D Pino, M Alarcón

  Air Pollution Modeling and Its Application XVII, 671-673, 2007

• Study of odor episodes using analytical and modeling approaches

  C Soriano, FX Roca, M Alarcón

  Air Pollution Modeling and Its Application XVII, 674-676, 2007

• Objective synoptic classification combined with high resolution meteorological models for wind mesoscale studies

  C Soriano, A Fernández, J Martín-Vide

  Meteorology and Atmospheric Physics 91 (1-4), 165-181, 2006

• Ozone Modeling of the Barcelona Area: Analysis of the Involved Transport Processes

  I Toll, C Soriano, JM Baldasano

  Air Pollution Modeling and Its Application XIV, (Ed: E-E. Gryning and F.A. Schiermieier). Kluwer Academic/Plenum Publishers, NY, pp. 729-730. 2000

• Sobre el uso de los procesos sinópticos objetivos y los modelos meteorológicos a alta resolución para el estudio de los patrones circulatorios a escala regional

  C Soriano Ortiz, AG Fernández, J Martín Vide

  Trópico 2004- CD-Rom con las contribuciones de Trópico 2004. La Habana, CUBA, 2004

• 6.28 PREDICTION OF FOG EPISODES AT THE AIRPORT OF MADRID-BARAJAS USING DIFFERENT MODELING APPROACHES

  C Soriano, D Cano, E Terradellas, B Physick

  9th International Conference on Harmonization within Atmospheric Dispersion …, 2004

• Estudio de la formación de vientos catabáticos en la región de Madrid mediante la simulación con un modelo de mesoescala a alta resolución

  C Soriano, D Cano Espadas, E Terradellas, B Physick

  Agencia Estatal de Meteorología, 2004

• One-way nesting versus two-way nesting: does it really make a difference?

  C Soriano, O Jorba, JM Baldasano

  Air Pollution Modeling and its Application XV, 177-185, 2004

• Environmental impact assessment of emissions from an industrial stack: Gaussian and mesoscale modeling

  C Soriano, R Soler, B Physick, A Luhar, P Hurley

  EGS-AGU-EUG Joint Assembly, 2003

• On wind velocity profiles over urban area

  K Bezpalcova, Z Janour, VMM Prior, C Soriano, M Strizik

  International journal of environment and pollution 20 (1-6), 196-206, 2003

• Modelling different meteorological situations in Catalunya, Spain, with MM5 and TAPM mesoscale models: a comparative study

  C Soriano, RM Soler, D Pino, M Alarcón, B Physick, P Hurley

  International journal of environment and pollution 20 (1-6), 256-268, 2003

• Lidar-aerosol sensing

  F Rocadenbosch

  Encyclopedia of Optical Engineering 1, 1090-102, 2003

• Urban photochemical pollution in the Iberian Peninsula: Lisbon and Barcelona airsheds

  N Barros, C Borrego, I Toll, C Soriano, P Jiménez, JM Baldasano

  Journal of the Air & Waste Management Association 53 (3), 347-359, 2003

• Remote Sensing Of Three-Dimensional Winds With Elastic Lidar: Explanation Of Maximum Cross-Correlation Method

  WT Buttler, C Soriano, JM Baldasano, GH Nickel

  Boundary-Layer Meteorology 103 (1), 173-174, 2002

• Modeling different meteorological situations in Catalunya, Spain, with MM5 and TAPM mesoscale models

  C Soriano, RM Soler, D Pino, M Alarcón, B Physick, P Hurley

  Harmonization within Atmospheric Dispersion Modeling for Regulatory Purposes …, 2002

• The UPC scanning Raman lidar: an engineering overview

  F Rocadenbosch, M Sicard, A Comerón, JM Baldasano, A Rodríguez, ...

  Proceeding of the 21st ILRC 1, 69-70, 2002

• Barcelona atmospheric monitoring with lidar: first measurements with the UPC's scanning portable lidar

  C Soriano, F Rocadenbosch, A Rodríguez, C Munoz, D García-Vizcaíno, ...

  Remote Sensing of Clouds and the Atmosphere V 4168, 170-182, 2001

• Preliminary Numerical Simulation of Winds Fields in Catalonia (NE Spain)

  JM Baldasano, M Millan, C Soriano, R Salvador, P Midgley, M Reuther, ...

  Springer, 2001

• Development of an Upgraded Urban Source Emission Model for Atmospheric Pollutans

  JM Baldasano, C Soriano, S Gassó

  GENEMIS Annual Report, 19-22, 2001

• Simultaneous observations of free tropospheric Saharan dust layers over Europe monitored by a co-ordinated ground-based lidar network in frame of the EARLINET...

  A Papayannis, A Boselli, B Calpini, A Chaikovsky, G Chourdakis, ...

  J. Aerosol Sci 32, 389-390, 2001

• Atlas de Radiació solar a Catalunya

  A Mitjà

  Institut Català d’Energia: Barcelona, Spain, 2001

• 3D scanning portable backscatter lidar platform for atmospheric remote sensing: Performance and architecture overview

  F Rocadenbosch, C Soriano, A Comeron, JM Baldasano, A Rodriguez, ...

  Remote Sensing of Clouds and the Atmosphere V 4168, 158-170, 2001

• Remote sensing of three-dimensional winds with elastic lidar: explanation of maximum cross-correlation method

  WT Buttler, C Soriano, JM Baldasano, GH Nickel

  Boundary-Layer Meteorology 101 (3), 305-327, 2001

• Circulatory patterns of air pollutants within the Barcelona air basin in a summertime situation: lidar and numerical approaches

  C Soriano, JM Baldasano, WT Buttler, KR Moore

  Boundary-Layer Meteorology 98 (1), 33-55, 2001

• Technological assessment of anaerobic digestion and composting-Emission of greenhouse gases from anaerobic digestion processes: Comparison with other muni...

  JM Baldasano, C Soriano

  Water Science and Technology 41 (3), 275-282, 2000

• V. Reports from the principal investigators

  JM Baldasano, C Soriano, I Toll, G Baumbach, K Glaser, U Vogt, A Grauer, ...

  GENEMIS, 17, 2000

• Wind input data for urban dispersion modeling–Activities of working group 1 within COST 715

  MW Rotach, E Batchvarova, R Berkowicz, J Brechler, Z Janour, ...

  3rd Symposium on the Urban Environment, 14-18, 2000

• Wind input data for urban dispersion modelling

  MW Rotach, E Batchvarova, R Berkowicz, J Brechler, Z Janour, ...

  Schatzmann, M., Brechler, J., Fisher, B., Eds, 8-35, 2000

• Vehicle emission model of air pollutants from road traffic: Application to Catalonia (Spain) for 1994

  R Delgado, I Toll, C Soriano, JM Baldasano

  WIT Transactions on Ecology and the Environment 42, 2000

• Emission of greenhouse gases from anaerobic digestion processes: comparison with other municipal solid waste treatments

  JM Baldasano, C Soriano

  Water science and technology 41 (3), 275-282, 2000

• Lidar inversion of atmospheric backscatter and extinction-to-backscatter ratios by use of a Kalman filter

  F Rocadenbosch, C Soriano, A Comerón, JM Baldasano

  Applied optics 38 (15), 3175-3189, 1999

• Emission inventory for greenhouse gases in the City of Barcelona, 1987–1996

  JM Baldasano, C Soriano, L Boada

  Atmospheric Environment 33 (23), 3765-3775, 1999

• Inversion of atmospheric optical parameters from elastic-backscatter lidar returns using a Kalman filter

  F Rocadenbosch, A Comeron, G Vazquez, A Rodriguez-Gomez, ...

  Atmospheric Propagation, Adaptive Systems, and Lidar Techniques for Remote …, 1998

• On the application of meteorological models and lidar techniques for air quality studies at a regional scale

  C Soriano, JM Baldasano, WT Buttler

  Air Pollution Modeling and its Application XII, 591-600, 1998

• Confirmation of a multilayer arrangement of aerosols in the Barcelona air basin using two independent lidar systems

  C Soriano, F Rocadenbosch, C Puente, A Rodriguez-Gomez, ...

  Spectroscopic atmospheric environmental monitoring techniques 3493, 212-223, 1998

• Atlas de Radiació Solar de Catalunya Ed. 1996

  J Baldasano, J Calbo, J Moreno

  Institut Català d'Energia, 1996

• Evaluacion de algoritmos de inversion lidar sin memoria

  D Pineda, F Rocadenbosch Burillo, C Soriano Ortiz, A Comerón Tejero

  X Symposium Nacional de la Unión Científica Internacional de Radio …, 1995

• Performance of a VME-based parallel processing LIDAR data acquisition system (summary)

  K Moore, B Buttler, M Caffrey, C Soriano

  Los Alamos National Lab., NM (United States), 1995

• Comparison of temperature and humidity profiles with elastic-backscatter lidar data

  C Soriano, WT Buttler, JM Baldasano

  Los Alamos National Lab., NM (United States), 1995

• Circulatory of air pollutants over the Barcelona Geographical area in summertime

  JM Baldasano, L Cremades, C Soriano

  Physico Chemical behaviour of Atmospheric Pollutants. Ed. Angletti and …, 1994

• Circulation of air pollutants over the Barcelona geographical area in summer

  J Baldasano, LV Cremades

  EUROPEAN COMMISSION, 1993

• Fonament de l'arc de Sant Martí

  E Jariod, J Llumà, S Cuevas, J Marti, EM Badosa, T Pérez, V Panyella, ...

  Revista de física, 27-31, 1991

• Fonament de l'arc de Sant Martí

  J Martí, T Pérez, S Cuevas, E Martín, V Panyella, E Jariod, J Llumà, ...

  Revista de física, 27-31, 1991

• Study of the land-sea interface in the Barcelona area with lidar data and meteorological models

  C Soriano, JM Baldasano

  WIT Transactions on Ecology and the Environment 25, 1970

Books, book chapters and edited books (Documents not available in Scipedia)

• Assessment of the emissions of greenhouse gases in Barcelona City. Period 1987-1994

  JM Baldasano, C Soriano

  Air Pollution VI, (Ed. Brebbia, C.A., Ratto, C.F. and Power, H.). Computational Mechanics Publications, pp.191-199. 1998. ISBN 1369-5886/1-85312-605-5