Assed Haddad Profile : Scipedia

Documents published in Scipedia

Case Study of Pathological Manifestations of Neoprene Support Devices in Infrastructure
F. Gonçalves, L. Alves, A. Haddad, E. Vazquez

Current Topics and Trends on Durability of Building Materials and Components, Serrat, C., Casas, J.R. and Gibert, V. (Eds).

Abstract
The so-called works of special arts, are constructions of high complexities that allow the advancement of widening gaps and overcoming obstacles previously unthinkable. With the increase in magnitude of these structures, in addition to greater investments, the maintenance of these structures becomes an increasingly important factor for engineering. Among the elements of bridge structures, the support devices are components with important structural functions, being essential for their proper functioning and especially the durability of the entire structure. This paper aims to evaluate the pathological manifestations in support devices so, according to inspections performed and the diagnosis of causes, define their best practices and treatments for the maintenance and mitigation of the pathologies found. In the practical study the following steps were performed: survey and selection of the structures currently under maintenance of MetrôRio; selection of criteria for the evaluation of pathologies; carrying out inspections; comparative analysis between the viaducts to determine the priority order for negotiations; and definition of conduct. The results obtained were the result of evaluation of the field analysis, diagnosis and comparison with tests performed in support devices. Having as input the tests in the support devices, the best treatments and suggestions to avoid new pathologies were proposed.
Abstract
The so-called works of special arts, are constructions of high complexities that allow the advancement of widening gaps and overcoming obstacles previously unthinkable. With [...]
- 19
- read

Articles (Documents not available in Scipedia)

Assessing the Retention Capacity of an Experimental Green Roof Prototype
M Silva, M K Najjar, A WA Hammad, A Haddad, E Vazquez

Water 12 (1), 90, 2020
Smart and Sustainable Cities: The Main Guidelines of City Statute for Increasing the Intelligence of Brazilian Cities.
EG Lima, CK Chinelli, ALA Guedes, EG Vazquez, AWA Hammad, ...

Sustainability (2071-1050) 12 (3), 2020
Economic Optimization of the Energy Supply for a Logistics Center Considering Variable-Rate Energy Tariffs and Integration of Photovoltaics
A Ximenes Naves, V Tulus, E Garrido Vazquez, L Jiménez Esteller, ...

Applied Sciences 9 (21), 4711, 2019
Approach of Human Factors in Risk Analysis and Operational Procedures: Stress Level Analysis of Operators in Performing Tasks
L Santos, I Luquetti, AN Haddad

2019 Spring Meeting and 15th Global Congress on Process Safety, 2019
A Time-Integrated Index for Flood Risk to Resistance Capacity
OM Rezende, LF Guimarães, FM Miranda, AN Haddad, MG Miguez

Water 11 (7), 1321, 2019
Solvent Evaporation in an Isolated Subsurface Structure: An Unrecognized and Underappreciated Risk
TN McManus, A Haddad

Infrastructures 4 (3), 47, 2019
Process Safety Leading Indicators in Oil Storage and Pipelines: Building a Panel of Indicators
L Santos, A Haddad, IL dos Santos

Chemical Engineering Transactions 77, 73-78, 2019
Visualizing Air Motion Involving Isolated Subsurface Structures: A Critical Tool for Understanding Ventilation Induced by Natural Forces
TN McManus, A Haddad

Infrastructures 4 (4), 59, 2019
Framework for a Systematic Parametric Analysis to Maximize Energy Output of PV Modules Using an Experimental Design
MK Najjar, EL Qualharini, AWA Hammad, D Boer, A Haddad

Sustainability 11 (10), 2992, 2019
Daylight Assessment and Energy Consumption Analysis at an Early Stage of Designing Residential Buildings Integrating BIM and LCA
M Najjar, A Haddad, K Figueiredo

Innovative Production And Construction: Transforming Construction Through …, 2019
Sustainable construction achieved through life cycle assessment: methodology, limitations and the way forward
K Figueiredo, AWA Hammad, A Haddad

Elsevier, 2019
Ozone: a critical contaminant produced during gas metal arc welding (GMAW) on aluminum alloys—resolving the short-versus long-duration sampling discrepancy
TN McManus, AN Haddad

Air Quality, Atmosphere & Health 12 (1), 97-106, 2019
A framework to evaluate urban flood resilience of design alternatives for flood defence considering future adverse scenarios
OM Rezende, FM Miranda, AN Haddad, MG Miguez

Water 11 (7), 1485, 2019
Natural ventilation in isolated subsurface structures in the infrastructure: A review
TN McManus, AN Haddad

Environment and Natural Resources Research 9 (2), p61, 2019
Surface Air Movement: An Important Contributor to Ventilation of Isolated Subsurface Structures?
TN McManus, A Haddad

Infrastructures 4 (2), 23, 2019
Ventilation of an isolated subsurface structure induced by natural forces
TN McManus, A Haddad

Infrastructures 4 (2), 33, 2019
FRAM AHP approach to analyse offshore oil well drilling and construction focused on human factors
JEM França, E Hollnagel, IJAL dos Santos, AN Haddad

Cognition, Technology & Work, 1-13, 2019
Sustainable zoning, land-use allocation and facility location optimisation in smart cities
AWA Hammad, A Akbarnezhad, A Haddad, EG Vazquez

Energies 12 (7), 1318, 2019
Evaluation of carbon nanotube incorporation in cementitious composite materials
ACJ Evangelista, JF de Morais, V Tam, M Soomro, LT Di Gregorio, ...

Materials 12 (9), 1504, 2019
A framework to estimate heat energy loss in building operation
MK Najjar, K Figueiredo, AWA Hammad, VWY Tam, ACJ Evangelista, ...

Journal of Cleaner Production 235, 789-800, 2019
The urban river restoration index (URRIX)-A supportive tool to assess fluvial environment improvement in urban flood control projects
AP Verol, BP Battemarco, ML Merlo, ACM Machado, AN Haddad, ...

Journal of Cleaner Production 239, 118058, 2019
Life cycle assessment methodology integrated with BIM as a decision-making tool at early-stages of building design
MK Najjar, K Figueiredo, ACJ Evangelista, AWA Hammad, VWY Tam, ...

International Journal of Construction Management, 1-15, 2019
Building information modelling-based framework to contrast conventional and modular construction methods through selected sustainability factors
AWA Hammad, A Akbarnezhad, P Wu, X Wang, A Haddad

Journal of Cleaner Production 228, 1264-1281, 2019
Life cycle costing as a bottom line for the life cycle sustainability assessment in the solar energy sector: A review
AX Naves, C Barreneche, AI Fernández, LF Cabeza, AN Haddad, D Boer

Solar Energy 192, 238-262, 2019
Integrating parametric analysis with building information modeling to improve energy performance of construction projects
MK Najjar, VWY Tam, LT Di Gregorio, ACJ Evangelista, AWA Hammad, ...

Energies 12 (8), 1515, 2019
Integrated optimization with building information modeling and life cycle assessment for generating energy efficient buildings
M Najjar, K Figueiredo, AWA Hammad, A Haddad

Applied Energy 250, 1366-1382, 2019
Limitations of Inherent Safety Techniques Application: A Case Study
MA de Paula Lima, A Haddad

Journal of Energy, Environmental & Chemical Engineering 3 (2), 27, 2018
Welder Exposure to NO and NO2 during Argon-Shielded Arc Welding on Aluminum Alloys
TN McManus, AN Haddad

Toxicology and Environmental Health Sciences 10 (5), 297-306, 2018
Causes of Construction Projects Cost Overrun in Brazil
A França, AN Haddad

International Journal of Sustainable Construction Engineering and Technology …, 2018
Risk minimization in isolated subsurface structures through ventilation induced by natural forces
TN McManus, AN Haddad

Safety science 102, 125-133, 2018
Multi-objective optimisation of bio-based thermal insulation materials in building envelopes considering condensation risk
A Torres-Rivas, M Palumbo, A Haddad, LF Cabeza, L Jiménez, D Boer

Applied Energy 224, 602-614, 2018
Exper-imental Analysis of Carbon Nanotubes in Cementitious Materials Composites.(2017) J Nanotechnol Material Sci 4 (2): 99-111
JF de Morais, A Haddad

J Nanotech Mater Sci 4 (2), 2017
Risk mapping and prioritization—case study in a Brazilian industrial laundry
GL Ribeiro, AN Haddad, EBF Galante

Occupational Safety and Hygiene V: Selected papers from the International …, 2017
A resilience engineering approach for sustainable safety in green construction
LV Rosa, JEM França, AN Haddad, PVR Carvalho

Journal of Sustainable Development of Energy, Water and Environment Systems …, 2017
Material flow analysis of the residential building stock at the city of Rio de Janeiro
K Condeixa, A Haddad, D Boer

Journal of Cleaner Production 149, 1249-1267, 2017
Integration of BIM and LCA: Evaluating the environmental impacts of building materials at an early stage of designing a typical office building
M Najjar, K Figueiredo, M Palumbo, A Haddad

Journal of Building Engineering 14, 115-126, 2017
Pathologies in Reinforced Concrete Structures
EG Vazquez, AN Haddad, EL Qualharini, LA Alves, IA Féo

Sustainable Construction, 213-228, 2016
Selo Casa Azul certificação ambiental estudo de caso: Condomínio Neo Niterói
CPG Dinamarco, A Haddad, A Evangelista

Revista Sustinere 4 (1), 82-104, 2016
Study of the technical capability of sugarcane bagasse ash in concrete production
T da Cruz Sessa, MM Silvoso, EG Vazquez, EL Qualharini, AN Haddad, ...

Materials Science Forum 866, 53-57, 2016
Chromium emissions during welding in an aluminum shipbuilding environment
TN McManus, AN Haddad

Weld. J 95, 86-92, 2016
Life cycle assessment of building construction materials: case study for a housing complex
JGG de Lassio, AN Haddad

Journal of Construction 15 (2), 69-77, 2016
Case study: LCA Methodology applied to materials management in a Brazilian residential construction site
J de Lassio, J França, K Espirito Santo, A Haddad

Journal of Engineering 2016, 2016
Transport and environmental sustainability infrastructure in the Amazon: the reconstruction of Highway BR-319 and its consequences in regional context
RV da Silva, AN Haddad, C Silva

Revista Internacional de Ciências 5 (1), 42-73, 2015
Life cycle assessment of a biodiesel production unit
P Sieira, E Galante, A Boareto Mendes, A Haddad

Am J Chem Eng 3 (2), 25-9, 2015
Construction sustainability evaluation using AHP and FRAM methods
AN Haddad, LV Rosa

IIE Annual Conference. Proceedings, 556, 2015
Life cycle inventory analysis of basic oils for manufacturing of automotive lubricants
GJO Figueiredo, AN Haddad, EL Qualharini, EG Vazquez

2015 International Conference on Artificial Intelligence and Industrial …, 2015
Argon-related fatigue: an investigation in an aluminum shipbuilding environment
N McManus, AN Haddad

Professional Safety 60 (10), 47-55, 2015
Oxygen Levels During Welding: Assessment in an Aluminum Shipbuilding Environment
N McManus, AN Haddad

Professional Safety 60 (07), 26-32, 2015
An inquiry into the life cycle of systems of inner walls: Comparison of masonry and drywall
K Condeixa, E Qualharini, D Boer, A Haddad

Sustainability 7 (6), 7904-7925, 2015
Assessing risk in sustainable construction using the Functional Resonance Analysis Method (FRAM)
LV Rosa, AN Haddad, PVR de Carvalho

Cognition, Technology & Work 17 (4), 559-573, 2015
Confined Space Incident Reconstruction: The Future Depends on Understanding the Past
ANH Neil McManus

Professional Safety 59 (10), 51-59, 2014
Life cycle inventory of a biodiesel production unit in Brazil
P Sieira, EBF Galante, WA Gonzales, A Haddad

American Journal of Chemical Engineering 2 (1), 1-7, 2014
Analysis by Ultrasound of the Behavior of Carbon Nanotubes on Cementitious Composites
JF de Morais, AN Haddad

Journal of Nanotechnology & Advanced Materials 2 (2), 87-98, 2014
LEED and HQE certifications assessment in sustainable construction
EG Vazquez, AN Haddad, ACJ Evangelista

WIT Transactions on the Built Environment, 361-368, 2014
Environmental Management System: Risk Evaluation Integrated to Life Cycle Assessment
EBF Galante, A Haddad

WIT Transactions on Engineering Sciences 88, 2014
Risk assessment for hexamine nitration into RDX
EBF Galante, DMB Costa, AN Haddad, IJAL Santos

Journal of Aerospace Technology and Management 6 (4), 373-388, 2014
Incident Records: Understanding the Past to Prevent Future Hazardous Energy Incidents
N McManus, AN Haddad

Professional Safety 59 (12), 34-43, 2014
Life Cicle Inventory for Lead Azide Manufacture
EBF Galante, A Haddad, D Boer, D Bonifácio

Journal of Aerospace Technology and Management 6 (1), 53-60, 2014
Use of methanol as a coolant during machining of aluminum in a shipbuilding environment: a failure to assess and manage risk
TN McManus, AN Haddad

Advanced Materials Research 955, 1061-1064, 2014
Life Cycle Impact Assessment of masonry system as inner walls: A case study in Brazil
K Condeixa, A Haddad, D Boer

Construction and Building Materials 70, 141-147, 2014
Analysis of the Behavior of Carbon Nanotubes on Cementitious Composites
JF de Morais, AN Haddad, L Haurie

International Scholarly Research Notices 2013, 2013
Quality Indicators for Life Cycle Inventory: Real Cases Exploratory Application
AN Haddad, K Condeixa, M Sedrez, ACJ Evangelista, DT Boer

Applied Mechanics and Materials 431, 350-355, 2013
Use of cement hydration stabilizer admixture at ready mix concrete to avoid material waste
AN Haddad, BGFR Cortes, ACJ Evangelista

Advanced Materials Research 818, 24-29, 2013
UV and blue light exposures in an aluminum shipbuilding environment
TN McManus, AN Haddad

Int J Open Sci. Res 1 (6), 15-27, 2013
Waste management in the oil and gas industry by Brazilian Guideline for Environmental Audits-DZ-056-R. 3
ECS Nunes, AN Haddad

American Journal of Environmental Protection 2 (6), 170-175, 2013
Life Cycle Assessment: a comparison of ceramic brick inventories to subsidize the development of databases in Brazil
AN Haddad, M de Moraes Sedrez, K de Macedo Pires Condeixa, ...

Applied Mechanics and Materials 431, 370-377, 2013
COMPARAÇÃO ENTRE MATERIAIS DA CONSTRUÇÃO CIVIL ATRAVÉS DA AVALIAÇÃO DO CICLO DE VIDA: SISTEMA DRYWALL E ALVENARIA DE VEDAÇÃO.
AN Haddad

Universidade Federal Fluminense, 2013
Assessing the sustainability of existing buildings using the analytic hierarchy process
LV Rosa, AN Haddad

American Journal of Civil Engineering 1 (1), 24-30, 2013
Human factors applied to alarm panel modernization of nuclear control room
IJAL dos Santos, MS Farias, FT Ferraz, AN Haddad, S Hecksher

Journal of Loss Prevention in the Process Industries 26 (6), 1308-1320, 2013
Building sustainability assessment throughout multicriteria decision making
L VillarinhoRosa, AN Haddad

environment 7 (9), 11, 2013
Application of explosives in the oil industry
E Galante, A Haddad, N Marques

International Journal of Oil, Gas and Coal Engineering (OGCE) 1 (2), 16-22, 2013
Discussion of Environmental Risk Assessment Models for Reactive Systems
EBF Galante, AN Haddad

11th International Probabilistic Safety Assessment and Management Conference …, 2012
UMA ESTIMATIVA DO INCREMENTO NO RISCO SOCIAL PERANTE O CRESCIMENTO POPULACIONAL DESORDENADO NO ENTORNO DE REFINARIAS AO LONGO DOS ANOS, UMA BASE PARA A ADOÇÃO DE MEDIDAS DE …
PD SILVEIRA, AN HADDAD

SIMPEP 2012, 2012
GESTÃO AMBIENTAL NA RODOVIA BR-319: DESMATAMENTO EVITADO E SUSTENTABILIDADE NO BIOMA AMAZÔNIA
RV da Silva, AN Haddad

III Congresso Brasileiro de Gestão Ambiental, 2012
Hazard matrix application in health, safety and environmental management risk evaluation
A Haddad, E Galante, R Caldas, C Morgado

Risk Management for the Future: Theory and Cases. Rijeka: InTech, 29-50, 2012
An Application Model for Sustainability in the Construction Industry
F Beiriz, A Haddad

Environmental Management in Practice, 267-284, 2011
TRIPOD: uma ferramenta de identificação e análise de riscos baseada nos acidentes
VAA Miranda, SD Cabral, AN Haddad

Revista Ação Ergonômica 1 (3), 2011
Risk identification techniques knowledge and application in the Brazilian construction
MC Garrido, MCA Ruotolo, FML Ribeiro, HA Naked

Journal of Civil Engineering and Construction Technology 2 (11), 242-252, 2011
Gestão de contratos na construção civil
BC Francisco, AN Haddad

Vértices 4 (1), 17-23, 2010
Análise do processo de gestão no setor de habitação: o caso COHAB/Acre
ÂMB Fleming, AN Haddad

Vértices 12 (1), 87-102, 2010
Política habitacional no Acre e Inclusão Social: o desafio dos governos
ÂMB Fleming, AN Haddad

Revista Brasileira de Gestão e Desenvolvimento Regional 6 (2), 2010
Asset prioritazation as a modal integrator in organizational logistics activities
RA Macedo, KA Macedo, AN Haddad

2010 IEEE International Conference on Industrial Engineering and Engineering …, 2010
Quantitative risk analysis applied to the gases industry
AN Haddad, TS Sá, EBF Galante

2009 IEEE International Conference on Industrial Engineering and Engineering …, 2009
análise do processo de gestão no setor de habitação: o caso cohab/acre
ÂMB Fleming, AN Haddad

Revista de Administração 8 (15), 13-33, 2009
Risk analysis procedures for explosives manufact... Advances in Safety, Reliability and Risk Management
E Galante, A Haddad

Proceedings of the European Safety and Reliability Conference, ESREL, 2009, 2009
Relevance Matrix Methodology Application Discussion focused upon Decision Weights as an Enhanced Prioritization Model
AN Haddad, CV Morgado

IIE Annual Conference. Proceedings, 152, 2008
Life test applied to Brazilian friction-resistant low alloy-high strength steel rails
DI De Souza, AN Haddad, DR Fonseca

Safety, Reliability and Risk Analysis, 957-966, 2008
Health, safety and environmental management risk evaluation strategy: hazard matrix application case studies
AN Haddad, CV Morgado, DI DeSouza

2008 IEEE International Conference on Industrial Engineering and Engineering …, 2008
De Souza Jr.(2007). A case study on the integration of Safety
AN Haddad, CRV Morgado, I Daniel Jr

Environmental and Quality Management Systems. IIE Annual Conference, 1190-1195, 2007
An application of the Relevance Matrix methodology in occupational risk evaluation
AN Haddad, DI DeSouza

2007 IEEE International Conference on Industrial Engineering and Engineering …, 2007
A case study on the integration of Safety, Environmental and Quality Management Systems
AN Haddad, CRV Morgado, DI De Souza Jr

IIE Annual Conference. Proceedings, 1190, 2007
Uma contribuição do método ELECTRE TRI à obtenção da classificação de riscos industriais
H Costa, Santafé JR, A Haddad

Investigação Operacional 27, 179-197, 2007
A importância do projeto final na formação do engenheiro de segurança do trabalho
AN Haddad, SD Cabral, VAA Miranda

Rio de Janeiro/RJ, 2003
Adequação curricular face às diretrizes curriculares para a engenharia
A HADDAD, R BARROS

XXXI COBENGE, Rio de Janeiro, 14-17, 2003

information

Submit your paper

Become a journal editor

Create a new collection

Create an organization profile

Open access

Documents published in Scipedia

Case Study of Pathological Manifestations of Neoprene Support Devices in Infrastructure

Articles (Documents not available in Scipedia)

Assessing the Retention Capacity of an Experimental Green Roof Prototype

Smart and Sustainable Cities: The Main Guidelines of City Statute for Increasing the Intelligence of Brazilian Cities.

Economic Optimization of the Energy Supply for a Logistics Center Considering Variable-Rate Energy Tariffs and Integration of Photovoltaics

Approach of Human Factors in Risk Analysis and Operational Procedures: Stress Level Analysis of Operators in Performing Tasks

A Time-Integrated Index for Flood Risk to Resistance Capacity

Solvent Evaporation in an Isolated Subsurface Structure: An Unrecognized and Underappreciated Risk

Process Safety Leading Indicators in Oil Storage and Pipelines: Building a Panel of Indicators

Visualizing Air Motion Involving Isolated Subsurface Structures: A Critical Tool for Understanding Ventilation Induced by Natural Forces

Framework for a Systematic Parametric Analysis to Maximize Energy Output of PV Modules Using an Experimental Design

Daylight Assessment and Energy Consumption Analysis at an Early Stage of Designing Residential Buildings Integrating BIM and LCA

Sustainable construction achieved through life cycle assessment: methodology, limitations and the way forward

Ozone: a critical contaminant produced during gas metal arc welding (GMAW) on aluminum alloys—resolving the short-versus long-duration sampling discrepancy

A framework to evaluate urban flood resilience of design alternatives for flood defence considering future adverse scenarios

Natural ventilation in isolated subsurface structures in the infrastructure: A review

Surface Air Movement: An Important Contributor to Ventilation of Isolated Subsurface Structures?

Ventilation of an isolated subsurface structure induced by natural forces

FRAM AHP approach to analyse offshore oil well drilling and construction focused on human factors

Sustainable zoning, land-use allocation and facility location optimisation in smart cities

Evaluation of carbon nanotube incorporation in cementitious composite materials

A framework to estimate heat energy loss in building operation

The urban river restoration index (URRIX)-A supportive tool to assess fluvial environment improvement in urban flood control projects

Life cycle assessment methodology integrated with BIM as a decision-making tool at early-stages of building design

Building information modelling-based framework to contrast conventional and modular construction methods through selected sustainability factors

Life cycle costing as a bottom line for the life cycle sustainability assessment in the solar energy sector: A review

Integrating parametric analysis with building information modeling to improve energy performance of construction projects

Integrated optimization with building information modeling and life cycle assessment for generating energy efficient buildings

Limitations of Inherent Safety Techniques Application: A Case Study

Welder Exposure to NO and NO2 during Argon-Shielded Arc Welding on Aluminum Alloys

Causes of Construction Projects Cost Overrun in Brazil

Risk minimization in isolated subsurface structures through ventilation induced by natural forces

Multi-objective optimisation of bio-based thermal insulation materials in building envelopes considering condensation risk

Exper-imental Analysis of Carbon Nanotubes in Cementitious Materials Composites.(2017) J Nanotechnol Material Sci 4 (2): 99-111

Risk mapping and prioritization—case study in a Brazilian industrial laundry

A resilience engineering approach for sustainable safety in green construction

Material flow analysis of the residential building stock at the city of Rio de Janeiro

Integration of BIM and LCA: Evaluating the environmental impacts of building materials at an early stage of designing a typical office building

Pathologies in Reinforced Concrete Structures

Selo Casa Azul certificação ambiental estudo de caso: Condomínio Neo Niterói

Study of the technical capability of sugarcane bagasse ash in concrete production

Chromium emissions during welding in an aluminum shipbuilding environment

Life cycle assessment of building construction materials: case study for a housing complex

Case study: LCA Methodology applied to materials management in a Brazilian residential construction site

Transport and environmental sustainability infrastructure in the Amazon: the reconstruction of Highway BR-319 and its consequences in regional context

Life cycle assessment of a biodiesel production unit

Construction sustainability evaluation using AHP and FRAM methods

Life cycle inventory analysis of basic oils for manufacturing of automotive lubricants

Argon-related fatigue: an investigation in an aluminum shipbuilding environment

Oxygen Levels During Welding: Assessment in an Aluminum Shipbuilding Environment

An inquiry into the life cycle of systems of inner walls: Comparison of masonry and drywall

Assessing risk in sustainable construction using the Functional Resonance Analysis Method (FRAM)

Confined Space Incident Reconstruction: The Future Depends on Understanding the Past

Life cycle inventory of a biodiesel production unit in Brazil

Analysis by Ultrasound of the Behavior of Carbon Nanotubes on Cementitious Composites

LEED and HQE certifications assessment in sustainable construction

Environmental Management System: Risk Evaluation Integrated to Life Cycle Assessment

Risk assessment for hexamine nitration into RDX

Incident Records: Understanding the Past to Prevent Future Hazardous Energy Incidents

Life Cicle Inventory for Lead Azide Manufacture

Use of methanol as a coolant during machining of aluminum in a shipbuilding environment: a failure to assess and manage risk

Life Cycle Impact Assessment of masonry system as inner walls: A case study in Brazil

Analysis of the Behavior of Carbon Nanotubes on Cementitious Composites

Quality Indicators for Life Cycle Inventory: Real Cases Exploratory Application

Use of cement hydration stabilizer admixture at ready mix concrete to avoid material waste

UV and blue light exposures in an aluminum shipbuilding environment

Waste management in the oil and gas industry by Brazilian Guideline for Environmental Audits-DZ-056-R. 3

Life Cycle Assessment: a comparison of ceramic brick inventories to subsidize the development of databases in Brazil

COMPARAÇÃO ENTRE MATERIAIS DA CONSTRUÇÃO CIVIL ATRAVÉS DA AVALIAÇÃO DO CICLO DE VIDA: SISTEMA DRYWALL E ALVENARIA DE VEDAÇÃO.

Assessing the sustainability of existing buildings using the analytic hierarchy process

Human factors applied to alarm panel modernization of nuclear control room

Building sustainability assessment throughout multicriteria decision making

Application of explosives in the oil industry

Discussion of Environmental Risk Assessment Models for Reactive Systems

UMA ESTIMATIVA DO INCREMENTO NO RISCO SOCIAL PERANTE O CRESCIMENTO POPULACIONAL DESORDENADO NO ENTORNO DE REFINARIAS AO LONGO DOS ANOS, UMA BASE PARA A ADOÇÃO DE MEDIDAS DE …

GESTÃO AMBIENTAL NA RODOVIA BR-319: DESMATAMENTO EVITADO E SUSTENTABILIDADE NO BIOMA AMAZÔNIA

Hazard matrix application in health, safety and environmental management risk evaluation

An Application Model for Sustainability in the Construction Industry

TRIPOD: uma ferramenta de identificação e análise de riscos baseada nos acidentes