Documents published in Scipedia

• Simulación numérica de problemas termomecánicos

  C. Agelet de Saracibar

  Monograph CIMNE (2003). M75

  
  

  • 9
  •  read

• Numerical Methods

  C. Agelet de Saracibar, R. Boman, P. Bussetta, J. Cajas, M. Cervera, M. Chiumenti, A. Coll, P. Dadvand, J. Hernández, G. Houzeaux, M. Riera, J. Ponthot

  (2016). C. Agelet de Saracibar (Ed.) in G.J. Schmitz, U. Prahl (Eds.), Handbook of Software Solutions for ICME, Chapter 7 Wiley, 632 pages, pp. 487-532

  
  

  Abstract

  As one of the results of an ambitious project, this handbook provides a well-structured directory of globally available software tools in the area of Integrated Computational Materials Engineering (ICME).  The compilation covers models, software tools, and numerical methods allowing describing electronic, atomistic, and mesoscopic phenomena, which in their combination determine the microstructure and the properties of materials. It reaches out to simulations of component manufacture comprising primary shaping, forming, joining, coating, heat treatment, and machining processes. Models and tools addressing the in-service behavior like fatigue, corrosion, and eventually recycling complete the compilation.  An introductory overview is provided for each of these different modelling areas highlighting the relevant phenomena and also discussing the current state for the different simulation approaches. A must-have for researchers, application engineers, and simulation software providers seeking a holistic overview about the current state of the art in a huge variety of modelling topics. This handbook equally serves as a reference manual for academic and commercial software developers and providers, for industrial users of simulation software, and for decision makers seeking to optimize their production by simulations. In view of its sound introductions into the different fields of materials physics, materials chemistry, materials engineering and materials processing it also serves as a tutorial for students in the emerging discipline of ICME, which requires a broad view on things and at least a basic education in adjacent fields.

  Abstract
  As one of the results of an ambitious project, this handbook provides a well-structured directory of globally available software tools in the area of Integrated Computational [...]

  • 6
  •  read

• Numerical simulation and visualization of material flow in friction stir welding via particle tracing

  N. Dialami, M. Chiumenti, M. Cervera, C. Agelet de Saracibar, J. Ponthot, P. Bussetta

  (2014). S. Idelsohn (Ed.), Numerical Simulations of Coupled Problems in Engineering, Part III, Chapter 7 Computational Methods, Vol. 33, Springer, pp. 157-169

  
  

  Abstract

  This work deals with the numerical simulation and material flow visualization of Friction Stir Welding (FSW) processes. The 4-th order Runge-Kutta (RK4) integration method is used for the computation of particle trajectories. The particle tracing method is used to study the effect of input process parameters and pin shapes on the weld quality. The results show that the proposed method is suitable for the optimization of the FSW process.

  Abstract
  This work deals with the numerical simulation and material flow visualization of Friction Stir Welding (FSW) processes. The 4-th order Runge-Kutta (RK4) integration method [...]

  • 16
  •  read

• Shaped metal deposition processes

  C. Agelet de Saracibar, A. Lundbäck, M. Chiumenti, M. Cervera

  (2014). R.B. Hetnarski (Ed.), Encyclopedia of Thermal Stresses Springer Dordrecht, Heidelberg, New York, London,, pp. 4346-4355

  
  

  Abstract

  The shaped metal deposition (SMD) process is a novel manufacturing technology which is similar to the multi-pass welding used for building features such as lugs and flanges on components [1–7]. This innovative technique is of great interest due to the possibility of employing standard welding equipment without the need for extensive new investment [8, 9]. The numerical simulation of SMD processes has been one of the research topics of great interest over the last years and requires a fully coupled thermo-mechanical formulation, including phase-change phenomena defined in terms of both latent heat release and shrinkage effects [1–6]. It is shown how computational welding mechanics models can be used to model SMD for prediction of temperature evolution, transient, as well as residual stresses and distortions due to the successive welding layers deposited. Material behavior is characterized by a thermo-elasto-viscoplastic constitutive model coupled with a metallurgical model [6]. Two different materials, nickel superalloy 718 [6] and titanium Ti-6Al-4 V 28/5/2014 Shaped Metal Deposition Processes - Springer http://link.springer.com/referenceworkentry/10.1007/978-94-007-2739-7_808/fulltext.html 2/15 [7], are considered in this work. Both heat convection and heat radiation models are introduced to dissipate heat through the boundaries of the component. The in-house-developed coupled thermomechanical finite element (FE) software COMET [10] is used to deal with the numerical simulation, and an ad hoc activation methodology is formulated to simulate the deposition of the different layers of filler material.

  Abstract
  The shaped metal deposition (SMD) process is a novel manufacturing technology which is similar to the multi-pass welding used for building features such as lugs and flanges [...]

  • 5
  •  read

• Thermo-Mechanical Contact in Casting Analysis

  M. Chiumenti, C. Agelet de Saracibar, M. Cervera

  (2006). J.L. Pérez-Aparicio (Ed.), Practical Applications Using Computational Contact Mechanics TCN, Trento, pp. 107-142, ISBN: 88-95176-01-4

  
  

  • 4
  •  read

• Challenges to be tackled in the computational modeling and numerical simulation of FSW processes

  C. Agelet de Saracibar

  Metals (2019). Vol. 9 (5), pp. 573

  
  

  Abstract

  The computational modeling and numerical simulation of Friction Stir Welding (FSW) processes is an extremely challenging task due to the highly nonlinear and coupled nature of the physical problem and the complex computational issues that need to be properly tackled in the numerical model.

  Abstract
  The computational modeling and numerical simulation of Friction Stir Welding (FSW) processes is an extremely challenging task due to the highly nonlinear and coupled nature [...]

  • 8
  •  read

• Challenges to be tackled in the computational modeling and numerical simulation of FSW processes

  C. Agelet de Saracibar

  Metals (2019). Vol. 9 (5), pp. 573

  
  

  Abstract

  The computational modeling and numerical simulation of Friction Stir Welding (FSW) processes is an extremely challenging task due to the highly nonlinear and coupled nature of the physical problem and the complex computational issues that need to be properly tackled in the numerical model.

  Abstract
  The computational modeling and numerical simulation of Friction Stir Welding (FSW) processes is an extremely challenging task due to the highly nonlinear and coupled nature [...]

  • 10
  •  read

• Conserving algorithms for frictionless and full stick friction contact dynamic problems using the direct elimination method

  C. Agelet de Saracibar, D. Di Capua

  Int. J. Numer. Meth. Engng. (2017). (preprint) Vol. 113 (6), pp. 910-937

  
  

  Abstract

  In this paper, conserving time‐stepping algorithms for frictionless and full stick friction dynamic contact problems are presented. Time integration algorithms for frictionless and full stick friction dynamic contact problems have been designed to preserve the conservation of key discrete properties satisfied at the continuum level. Energy and energy‐momentum–preserving algorithms for frictionless and full stick friction dynamic contact problems, respectively, have been designed and implemented within the framework of the direct elimination method, avoiding the drawbacks linked to the use of penalty‐based or Lagrange multipliers methods. An assessment of the performance of the resulting formulation is shown in a number of selected and representative numerical examples, under full stick friction and slip frictionless contact conditions. Conservation of key discrete properties exhibited by the time‐stepping algorithm is shown.

  Abstract
  In this paper, conserving time‐stepping algorithms for frictionless and full stick friction dynamic contact problems are presented. Time integration algorithms for frictionless [...]

  • 11
  •  read

• Software Solutions for ICME

  G. Schmitz, A. Engstrom, R. Bernhardt, U. Prahl, L. Adam, J. Seyfarth, M. Apel, C. Agelet de Saracibar, P. Korzhavyi, J. Agren, B. Patzak

  Journal of The Minerals, Metals & Materials Society (2016). Vol. 68 (1), pp. 70-76

  
  

  Abstract

  The Integrated Computational Materials Engineering expert group (ICMEg), a coordination activity of the European Commission, aims at developing a global and open standard for information exchange between the heterogeneous varieties of numerous simulation tools. The ICMEg consortium coordinates respective developments by a strategy of networking stakeholders in the first International Workshop on Software Solutions for ICME, compiling identified and relevant software tools into the Handbook of Software Solutions for ICME, discussing strategies for interoperability between different software tools during a second (planned) international workshop, and eventually proposing a scheme for standardized information exchange in a future book or document. The present article summarizes these respective actions to provide the ICME community with some additional insights and resources from which to help move this field forward.

  Abstract
  The Integrated Computational Materials Engineering expert group (ICMEg), a coordination activity of the European Commission, aims at developing a global and open standard [...]

  • 13
  •  read

• A direct elimination algorithm for quasi-static and dynamic contact problems

  D. Di Capua, C. Agelet de Saracibar

  Finite Elements in Analysis and Design (2015). (preprint) Vol. 93 (1), pp. 107-125

  
  

  Abstract

  This paper deals with the computational modeling and numerical simulation of contact problems at finite deformations using the finite element method. Quasi-static and dynamic problems are considered and two particular frictional conditions, full stick friction and frictionless cases, are addressed. Lagrange multipliers and regularized formulations of the contact problem, such as penalty or augmented Lagrangian methods, are avoided and a new direct elimination method is proposed. Conserving algorithms are also introduced for the proposed formulation for dynamic contact problems. An assessment of the performance of the resulting formulation is shown in a number of selected benchmark tests and numerical examples, including both quasi-static and dynamic contact problems under full stick friction and frictionless contact conditions. Conservation of key discrete properties exhibited by the time stepping algorithm used for dynamic contact problems is also shown in an example

  Abstract
  This paper deals with the computational modeling and numerical simulation of contact problems at finite deformations using the finite element method. Quasi-static and dynamic [...]

  • 10
  •  read

Articles (Documents not available in Scipedia)

• Challenges in thermo-mechanical analysis of Friction Stir Welding processes

  N. Dialami, M. Chiumenti, M. Cervera, C. Agelet de Saracibar

  Archives of Computational Methods in Engineering Volume 24, Issue 1, January 2017, Pages 189–225. First published on-line: 19 January 2016. http://dx.doi.org/10.1007/s11831-015-9163-y

• Local-global strategy for the prediction of residual stresses in FSW processes

  N. Dialami, M. Cervera, M. Chiumenti, C. Agelet de Saracibar

  International Journal of Advanced Manufacturing Technology Volume 88, Issue 9, February 2017, Pages 3099–3111. First published on-line: 14 June 2016. http://dx.doi.org/10.1007/s00170-016-9016-3

• A fast and accurate two-stage strategy to evaluate the effect of the pin tool profile on metal flow, torque and forces in friction stir welding

  N. Dialami, M. Cervera, M. Chiumenti, C. Agelet de Saracibar

  International Journal of Mechanical Sciences Volume 122, March 2017, Pages 215-227. Available on-line: 16 January 2017. http://dx.doi.org/10.1016/j.ijmecsci.2016.12.016

• 3D Numerical models of FSW processes with non-cylindrical pin

  P. Bussetta, N. Dialami, M. Chiumenti, C. Agelet de Saracibar, M. Cervera, J.P. Ponthot

  Advances in Materials and Processing Technologies Volume 1, Issue 3-4, January 2016, Pages 275-287. First published on-line: 1 February 2016. http://dx.doi.org/10.1080/2374068X.2015.1121035

• Numerical modeling of the electron beam welding process and its experimental validation

  M. Chiumenti, M. Cervera, N. Dialami, B. Wu, L. Jinwei, C. Agelet de Saracibar

  Finite Elements in Analysis and Design Volume 121, 15 November 2016, Pages 118–133. First published on-line: 20 September 2016. http://dx.doi.org/10.1016/j.finel.2016.07.003

• 3D Numerical models using a fluid or a solid formulation of FSW processes with a non-cylindrical pin

  P. Bussetta, N. Dialami, M. Chiumenti, C. Agelet de Saracibar, M. Cervera, R. Boman, J.P. Ponthot

  Special issue on Simulation Techniques for Process Modeling Guest Editors: Ton van den Boogaard, Stefanie Reese Advanced Modeling and Simulation in Engineering Sciences Volume 2, Article 27, December 2015. First published on-line: 18 November 2015. http://dx.doi.org/10.1186/s40323-015-0048-2

• Software solutions for ICME

  G.J. Schmitz, A. Engstrom, R. Bernhardt, U. Prahl, L. Adam, J. Seyfarth, M. Apel, C. Agelet de Saracibar, P. Korzhavyi, J. Agren, B. Patzak

  The Journal of The Minerals, Metals & Materials Society (TMS) Volume 68, Issue 1, January 2016, Pages 70-76. First published on-line: 30 November 2015. http://dx.doi.org/10.1007/s11837-015-1718-8

• Computational modeling and sub-grid scale stabilization of incompressibility and convection in the numerical simulation of friction stir welding processes

  C. Agelet de Saracibar, M. Chiumenti, M. Cervera, N. Dialami, A. Seret

  Archives of Computational Methods in Engineering Volume 21, Issue 1, March 2014, Pages 3-37. First published on-line: 2 February 2014. http://dx.doi.org/10.1007/s11831-014-9094-z

• A direct elimination algorithm for quasi-static and dynamic contact problems

  D. Di Capua, C. Agelet de Saracibar

  Finite Elements in Analysis and Design Volume 93, Issue 1, January 2015, Pages 107-125. First published on-line: 8 October 2014. http://dx.doi.org/10.1016/j.finel.2014.09.001

• An apropos kinematic framework for the numerical modeling of friction stir welding

  N. Dialami, M. Chiumenti, M. Cervera, C. Agelet de Saracibar

  Computers & Structures Volume 117, February 2013, Pages 48-57. First published on-line: 4 January 2013. http://dx.doi.org/10.1016/j.compstruc.2012.12.006

• A numerical model for the simulation of precipitates dissolution of hardened aluminium alloys using neural networks

  C. Agelet de Saracibar, R. López, B. Ducoeur, M. Chiumenti, B. de Meester

  Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería Volume 29, Issue 1, January-March 2013, Pages 29-37. First published on-line: 22 February 2013. http://dx.doi.org/10.1016/j.rimni.2012.02.003

• Comparison of a fluid and a solid approach for the numerical simulation of friction stir welding with a non-cylindrical pin

  P. Bussetta, N. Dialami, R. Boman, M. Chiumenti, C. Agelet de Saracibar, M. Cervera, J.P. Ponthot

  Steel Research International Volume 85, Issue 6, June 2014, Pages 968-979. First published on-line: 13 December 2013. http://dx.doi.org/10.1002/srin.201300182

• Material flow visualization in friction stir welding via particle tracing

  N. Dialami, M. Chiumenti, M. Cervera, C. Agelet de Saracibar, J.P. Ponthot

  International Journal of Material Forming Volume 8, Issue 2, 1 April 2015, Pages 167-181. First published on-line: 20 December 2013. http://dx.doi.org/10.1007/s12289-013-1157-4

• Numerical modeling of friction stir welding processes

  M. Chiumenti, M. Cervera, C. Agelet de Saracibar, N. Dialami

  Computer Methods in Applied Mechanics and Engineering Volume 254, February 2013, Pages 353-369. First published on-line: 10 October 2012. http://dx.doi/org/10.1016/j.cma.2012.09.013

• Modelado termomecánico del proceso de friction stir welding utilizando la geometría real de la herramienta

  D. Santiago, G. Lombera, S. Urquiza, C. Agelet de Saracibar, M. Chiumenti

  Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería Volume 26, Issue 4, 2010, Pages 293-303

• Finite element modeling of multi-pass welding and shaped metal deposition processes

  M. Chiumenti, M. Cervera, A. Salmi, C. Agelet de Saracibar, N. Dialami, K. Matsui

  Computer Methods in Applied Mechanics and Engineering Volume 199, Issues 37-40, 1 August 2010, Pages 2343-2359. First published on-line: 14 April 2010. http://dx.doi.org/10.1016/j.cma.2010.02.018

• Modeling precipitate dissolution in hardened aluminium alloys using neural networks

  R. López, B. Ducoeur, M. Chiumenti, B. de Meester, C. Agelet de Saracibar

  International Journal of Material Forming Volume 1, Issue 1 Supplement, April 2008, Pages 1291-1294. First published on-line: April 2008. http://dx.doi.org/10.1007/s12289-008-0139-4

• On the numerical modeling of the thermomechanical contact for metal casting analysis

  M. Chiumenti, C. Agelet de Saracibar, M. Cervera

  Journal of Heat Transfer Volume 130, Issue 6, 23 April 2008, Art. No. 061301.1-10. First published on-line: 23 April 2008. http://dx.doi.org/10.1115/1.2897923

• Current developments on the coupled thermomechanical computational modeling of metal casting processes

  C. Agelet de Saracibar, M. Chiumenti, M. Cervera

  Computer Methods in Materials Science Volume 6, Issues 1-2, 2006, Pages 15-25

• Formulación estabilizada de elementos finitos triangulares y tetraédricos para problemas de incompresibilidad en grandes deformaciones

  Q. Valverde, M. Chiumenti, C. Agelet de Saracibar, M. Cervera

  Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería Volume 22, Issue 3, 2006, Pages 335-348

• Discrete element modelling and simulation of sand mould manufacture for the lost foam process

  J. Rojek, F. Zarate, C. Agelet de Saracibar, C. Gilbourne, P. Verdot

  International Journal for Numerical Methods in Engineering Volume 62, Issue 11, 21 March 2005, Pages 1421-1441. First published on-line: 1 December 2004. http://dx.doi.org/10.1002/nme.1221

• Formulación estabilizada de elementos finitos triangulares y tetraédricos para problemas de incompresibilidad en deformaciones infinitesimales

  Q. Valverde, M. Chiumenti, M. Cervera, C. Agelet de Saracibar

  Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería Volume 21, Issue 4, 2005, Pages 345-363

• On the orthogonal subgrid scale pressure stabilization of finite deformation J2 plasticity

  C. Agelet de Saracibar, M. Chiumenti, Q. Valverde, M. Cervera

  Computer Methods in Applied Mechanics and Engineering Volume 195, Issues 9-12, 1 February 2006, Pages 1224-1251. First published on-line: 15 June 2005. http://dx.doi.org/10.1016/j.cma.2005.04.007

• A stabilized formulation for incompressible plasticity using linear triangles and tetrahedra

  M. Chiumenti, Q. Valverde, C. Agelet de Saracibar, M. Cervera

  International Journal of Plasticity Volume 20, Issues 8-9, August-September 2004, Pages 1487-1504. First published on-line: 19 December 2003. http://dx.doi.org/10.1016/j.ijplas.2003.11.009

• Shear band localization via local J2 continuum damage mechanics

  M. Cervera, M. Chiumenti, C. Agelet de Saracibar

  Computer Methods in Applied Mechanics and Engineering Volume 193, Issues 9-11, 5 March 2004, Pages 849-880. First published on-line: 28 January 2004. http://dx.doi.org/10.1016/j.cma.2003.11.009

• Softening, localization and stabilization: Capture of discontinuous solutions in J2 plasticity

  M. Cervera, M. Chiumenti, C. Agelet de Saracibar

  International Journal for Numerical and Analytical Methods in Geomechanics Volume 28, Issue 5, 25 April 2004, Pages 373-393. First published on-line: 14 April 2004. http://dx.doi.org/10.1002/nag.341

• Mixed linear/linear simplicial elements for incompressible elasticity and plasticity

  M. Cervera, M. Chiumenti, Q. Valverde, C. Agelet de Saracibar

  Computer Methods in Applied Mechanics and Engineering Volume 192, Issues 49-50, 5 December 2003, Pages 5249-5263. First published on-line: 8 October 2003. http://dx.doi.org/10.1016/j.cma.2003.07.007

• A stabilized formulation for incompressible elasticity using linear displacement and pressure interpolations

  M. Chiumenti, Q. Valverde, C. Agelet de Saracibar, M. Cervera

  Computer Methods in Applied Mechanics and Engineering Volume 191, Issue 46, 8 November 2002, Pages 5253-5264. First published on-line: 22 October 2002. http://dx.doi.org/10.1016/S0045-7825(02)00443-7

• On the constitutive modeling of coupled thermomechanical phase-change problems

  C. Agelet de Saracibar, M. Cervera, M. Chiumenti

  Special Issue on Computational Modeling of Forming Processes International Journal of Plasticity Volume 17, Issue 12, December 2001, Pages 1565-1622. First published on-line: 16 October 2001. http://dx.doi.org/10.1016/S0749-6419(00)00094-2

• On the formulation of coupled thermoplastic problems with phase-change

  C. Agelet de Saracibar, M. Cervera, M. Chiumenti

  International Journal of Plasticity Volume 15, Issue 1, March 1999, Pages 1-34. First published on-line: 10 March 1999. http://dx.doi.org/10.1016/S0749-6419(98)00055-2

• On the numerical modeling of frictional wear phenomena

  C. Agelet de Saracibar, M. Chiumenti

  Computer Methods in Applied Mechanics and Engineering Volume 177, Issues 3-4, 20 July 1999, Pages 401-426. First published on-line: 30 May 2000. http://dx.doi.org/10.1016/S0045-7825(98)00390-9

• Thermo-mechanical analysis of industrial solidification processes

  M. Cervera, C. Agelet de Saracibar, M. Chiumenti

  International Journal for Numerical Methods in Engineering Volume 46, Issue 9, 30 November 1999, Pages 1575-1591. First published on-line: 19 October 1999. http://dx.doi.org/10.1002/(SICI)1097-0207(19991130)46:9<1575::AID-NME713>3.0.CO;2-D

• Numerical analysis of coupled thermomechanical frictional contact problems. Computational model and applications

  C. Agelet de Saracibar

  Archives of Computational Methods in Engineering Volume 5, Issue 3, September 1998, Pages 243-301

• A new frictional time integration algorithm for large slip multi-body frictional contact problems

  C. Agelet de Saracibar

  Computer Methods in Applied Mechanics and Engineering Volume 142, Issues 3-4, 30 March 1997, Pages 303-334. First published on-line: 6 May 1999. http://dx.doi.org/10.1016/S0045-7825(96)01133-4

• Comparative study on sheet metal forming processes by numerical modelling and experiment

  W. Sosnowski, E. Oñate, C. Agelet de Saracibar

  Journal of Materials Processing Technology Volume 34, Issues 1-4, September 1992, Pages 109-116. First published on-line: 27 February 2003. http://dx.doi.org/10.1016/0924-0136(92)90096-B

• Análisis por elementos finitos de procesos de embutición de chapa mediante un modelo viscoplástico con degradación por huecos

  E. Oñate, C. Agelet de Saracibar, J.B. Dalin

  Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería Volume 6, Issue 1, 1990, Pages 7-23

• Finite element analysis of sheet metal forming problems using a selective viscous bending/membrane formulation

  E. Oñate, C. Agelet de Saracibar

  International Journal for Numerical Methods in Engineering Volume 30, Issue 8, December 1990, Pages 1577-1593. First published on-line: 24 June 2005. http://dx.doi.org/10.1002/nme.1620300815

• Plastic and viscoplastic flow of void‐containing metals. Applications to axisymmetric sheet forming problems

  E. Oñate, M. Kleiber, C. Agelet de Saracibar

  International Journal for Numerical Methods in Engineering Volume 25, Issue 1, January 1988, Pages 227-251. First published on-line: 23 June 2005. http://dx.doi.org/10.1002/nme.1620250118

Books, book chapters and edited books (Documents not available in Scipedia)

• Continuum Mechanics for Engineers: Theory and Problems

  X. Oliver, C. Agelet de Saracibar

  Barcelona, Second Edition, 2017, 536 pp DOI: 10.13140/RG.2.2.25821.20961

• Numerical Methods

  C. Agelet de Saracibar, R. Boman, P. Bussetta, J.C. Cajas, M. Cervera, M. Chiumenti, A. Coll, P. Dadvand, J. Hernández, G. Houzeaux, M.A. Pasenau de Riera, J.P. Ponthot

  in G.J. Schmitz, U. Prahl (Eds.), Handbook of Software Solutions for ICME, Chapter 7 Wiley, November 2016, 632 pages, pp. 487-532 ISBN: 978-3-527-33902-0

• Local and Global Approaches to Friction Stir Welding

  N. Dialami, M. Chiumenti, M. Cervera, C. Agelet de Saracibar

  Monograph, M157, CIMNE, Barcelona, January 2016, 93 pp. ISBN 978-84-945077-0-0

• Shaped Metal Deposition Processes

  C. Agelet de Saracibar, A. Lundbäck, M. Chiumenti, M. Cervera

  in R.B. Hetnarski (Ed.), Encyclopedia of Thermal Stresses Springer Dordrecht, Heidelberg, New York, London, 2014, pp. 4346-4355 Chapter DOI: 10.1007/978-94-007-2739-7_808 ISBN: 978-94-007-2738-0 (Print) 978-94-007-2739-7 (e-Book)

• Numerical Simulation and Visualization of Material Flow in Friction Stir Welding via Particle Tracing

  N. Dialami, M. Chiumenti, M. Cervera, C. Agelet de Saracibar, J.P. Ponthot, P. Bussetta

  in S. Idelsohn (Ed.), Numerical Simulations of Coupled Problems in Engineering, Part III, Chapter 7 Computational Methods, Vol. 33, Springer, 2014, pp. 157-169 Chapter DOI: 10.1007/978-3-319-06136-8_7 ISBN: 978-3-319-06135-1 (Print) 978-3-319-06136-8 (Online)

• On the Computational Modeling and Numerical Simulation of FSW Processes

  C. Agelet de Saracibar, M. Chiumenti, M. Cervera, N. Dialami, D. Santiago, G. Lombera

  Monograph CMFP 3, CIMNE, Barcelona, January 2012, 46 pp. ISBN 84-939640-0-9

• Thermo-Mechanical Contact in Casting Analysis

  M. Chiumenti, C. Agelet de Saracibar, M. Cervera

  in J.L. Pérez-Aparicio (Ed.), Practical Applications Using Computational Contact Mechanics TCN, Trento, 2006, pp. 107-142 ISBN: 88-95176-01-4

• Mecánica de Medios Continuos para Ingenieros

  X. Oliver, C. Agelet de Saracibar

  Ediciones UPC, Barcelona, Spain, 3ª Edición, 2005, 329 pp. ISBN 84-8301-582-X

• On the Orthogonal Sub-grid Scale Pressure Stabilization of Small and Finite Deformation J2 Plasticity

  C. Agelet de Saracibar, M. Chiumenti, M. Cervera, Q. Valverde

  Monograph CMFP 2, CIMNE, Barcelona, November 2004, 76 pp. ISBN 84-95999-62-5

• Simulación Numérica de Problemas Termomecánicos

  C. Agelet de Saracibar

  Monografía M75, CIMNE, Barcelona, Julio 2003, 178 pp. ISBN 84-95999-31-5

• A Mixed Finite Element Formulation for Incompressibility using Linear Displacement and Pressure Interpolations

  D. Christ, M. Cervera, M. Chiumenti, C. Agelet de Saracibar

  Monograph M77, CIMNE, Barcelona, July 2003, 71 pp. ISBN 84-95999-35-8

• Shear Band Localization via Local J2 Continuum Damage Mechanics

  M. Cervera, M. Chiumenti, C. Agelet de Saracibar

  Monograph M78, CIMNE, Barcelona, July 2003, 60 pp. ISBN 84-95999-36-6

• Mecánica de Medis Continus per a Enginyers

  X. Oliver, C. Agelet de Saracibar

  Ediciones UPC, Barcelona, Spain, 1ª Edición, 2003, 334 pp. ISBN 84-8301-719-9

• Elementos Estabilizados de Bajo Orden en Mecánica de Sólidos

  Q. Valverde, C. Agelet de Saracibar, M. Cervera, M. Chiumenti

  Monografía M69, CIMNE, Barcelona, Diciembre 2002, 214 pp. ISBN 84-95999-16-1

• Mecánica de Medios Continuos para Ingenieros

  X. Oliver, C. Agelet de Saracibar

  Editorial Alfaomega, Mexico, 1ª Edición, 2002, 348 pp. ISBN 970-15-0778-9

• Constitutive modeling and numerical analysis of thermomechanical phase-change systems

  M. Chiumenti, C. Agelet de Saracibar, M. Cervera

  Monograph M48, CIMNE, Barcelona, 1999, 250 pp. ISBN 84-89925-39-9

• Numerical Modeling of Sheet Metal Forming Problems

  E. Oñate, C. Agelet de Saracibar

  in P. Hartley, I. Pillinger, C.E.N. Sturgess (Eds.), Numerical Modeling of Material Deformation Processes: Research, Developments and Applications Springer-Verlag, London, 1992, pp. 318-357 ISBN: 978-1-4471-1747-6

• Modelado numérico de procesos de conformado de láminas metálicas

  C. Agelet de Saracibar, E. Oñate

  Monografía M8, CIMNE, Barcelona, 1991, 300 pp. ISBN 84-87867-07-3

Conference papers and presentations (Documents not available in Scipedia)

• Master Course on Computational Mechanics - Continuum Mechanics

  C. Agelet de Saracibar

  Master Course on Computational Mechanics, CIMNE, UPC BarcelonaTech, Barcelona, Spain, 2016

• On the numerical simulation of Additive Manufacturing processes

  M. Chiumenti, M. Cervera, N. Dialami, C. Agelet de Saracibar, W. Huang, X. Lin, L. Wei, Y. Zheng, L. Ma

  ICOMP 2016, International Conference on Computational Methods in Manufacturing Processes, Liège, Belgium, 18-20 May 2016

• A Direct Elimination Algorithm (DEA) for full stick and frictionless, quasi-static and dynamic contact problems

  C. Agelet de Saracibar, D. Di Capua

  PANACM 2015, 1st Pan-American Congress on Computational Mechanics, Buenos Aires, Argentina, 27-29 April 2015