1 Title, abstract and keywords
2 The main text
3 Bibliography
4 Acknowledgments
5 References
Back to Top
Document information
Published on 01/01/2009
DOI: 10.1016/j.cma.2009.04.002
Licence: CC BY-NC-SA license
Web of Science Core Collection® Times cited: 49
Crossref Cited-by Times cited: 53
OpenCitations.net Times cited: 40
OpenCitations.net - Citing documents:
- M. Mier-Torrecilla, S. Idelsohn, E. Oñate. Advances in the simulation of multi-fluid flows with the particle finite element method. Application to bubble dynamics. Int. J. Numer. Meth. Fluids 67(11) (2010) DOI 10.1002/fld.2429
- E. Oñate, P. Nadukandi, S. Idelsohn, J. García, C. Felippa. A family of residual-based stabilized finite element methods for Stokes flows. Int. J. Numer. Meth. Fluids 65(1-3) (2010) DOI 10.1002/fld.2468
- M. Mier-Torrecilla, A. Geyer, J. Phillips, S. Idelsohn, E. Oñate. Numerical simulations of negatively buoyant jets in an immiscible fluid using the Particle Finite Element Method. Int. J. Numer. Meth. Fluids 69(5) (2011) DOI 10.1002/fld.2628
- R. Ausas, G. Buscaglia, S. Idelsohn. A new enrichment space for the treatment of discontinuous pressures in multi-fluid flows. Int. J. Numer. Meth. Fluids 70(7) (2011) DOI 10.1002/fld.2713
- E. Oñate, A. Franci, J. Carbonell. Lagrangian formulation for finite element analysis of quasi-incompressible fluids with reduced mass losses. Int. J. Numer. Meth. Fluids 74(10) (2014) DOI 10.1002/fld.3870
- S. Idelsohn, J. Marti, P. Becker, E. Oñate. Analysis of multifluid flows with large time steps using the particle finite element method. Int. J. Numer. Meth. Fluids 75(9) (2014) DOI 10.1002/fld.3908
- P. Ryzhakov, A. Jarauta. An embedded approach for immiscible multi-fluid problems. Int. J. Numer. Meth. Fluids 81(6) (2015) DOI 10.1002/fld.4190
- K. KAMRAN, R. ROSSI, E. OÑATE, S. IDELSOHN. A COMPRESSIBLE LAGRANGIAN FRAMEWORK FOR MODELING THE FLUID–STRUCTURE INTERACTION IN THE UNDERWATER IMPLOSION OF AN ALUMINUM CYLINDER. Math. Models Methods Appl. Sci. 23(02) (2013) DOI 10.1142/s021820251340006x
- M. Luo, C. Koh, M. Gao, W. Bai. A particle method for two-phase flows with large density difference. Int. J. Numer. Meth. Engng 103(4) (2015) DOI 10.1002/nme.4884
- X. Zhang, D. Sheng, S. Sloan, J. Bleyer. Lagrangian modelling of large deformation induced by progressive failure of sensitive clays with elastoviscoplasticity. Int. J. Numer. Meth. Engng 112(8) (2017) DOI 10.1002/nme.5539
- S. Meduri, M. Cremonesi, U. Perego, O. Bettinotti, A. Kurkchubasche, V. Oancea. A partitioned fully explicit Lagrangian finite element method for highly nonlinear fluid-structure interaction problems. Int. J. Numer. Meth. Engng 113(1) (2017) DOI 10.1002/nme.5602
- S. Meduri, M. Cremonesi, U. Perego. An efficient runtime mesh smoothing technique for 3D explicit Lagrangian free-surface fluid flow simulations. Int J Numer Methods Eng 117(4) (2018) DOI 10.1002/nme.5962
- E. Oñate, S. Idelsohn, C. Felippa. Consistent pressure Laplacian stabilization for incompressible continua via higher-order finite calculus. Int. J. Numer. Meth. Engng. 87(1-5) (2010) DOI 10.1002/nme.3021
- C. de Saracibar, R. Boman, P. Bussetta, J. Cajas, M. Cervera, M. Chiumenti, A. Coll, P. Dadvand, J. Hernández Ortega, G. Houzeaux, M. de Riera, J. Ponthot. Numerical Methods. (2016) DOI 10.1002/9783527693566.ch7
- A. Larese. A Lagrangian PFEM approach for non-Newtonian viscoplastic materials. Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería 33(3-4) DOI 10.1016/j.rimni.2016.07.002
- E. Oñate, S. Idelsohn, M. Celigueta, B. Suárez. The Particle Finite Element Method (PFEM). An Effective Numerical Technique for Solving Marine, Naval and Harbour Engineering Problems. DOI 10.1007/978-94-007-6143-8_4
- A. Franci. Unified Stabilized Formulation for Quasi-incompressible Materials. (2016) DOI 10.1007/978-3-319-45662-1_3
- A. Franci. Coupled Thermal–Mechanical Formulation. (2016) DOI 10.1007/978-3-319-45662-1_5
- E. Oñate, S. Idelsohn, M. Celigueta, R. Rossi, J. Marti, J. Carbonell, P. Ryzhakov, B. Suárez. Advances in the Particle Finite Element Method (PFEM) for Solving Coupled Problems in Engineering. (2011) DOI 10.1007/978-94-007-0735-1_1
- S. Idelsohn, M. Mier-Torrecilla, J. Marti, E. Oñate. The Particle Finite Element Method for Multi-Fluid Flows. (2011) DOI 10.1007/978-94-007-0735-1_5
- J. Gimenez, N. Nigro, S. Idelsohn. Evaluating the performance of the particle finite element method in parallel architectures. Comp. Part. Mech. 1(1) (2014) DOI 10.1007/s40571-014-0009-4
- E. Oñate, M. Celigueta, S. Latorre, G. Casas, R. Rossi, J. Rojek. Lagrangian analysis of multiscale particulate flows with the particle finite element method. Comp. Part. Mech. 1(1) (2014) DOI 10.1007/s40571-014-0012-9
- K. Shibata, I. Masaie, M. Kondo, K. Murotani, S. Koshizuka. Improved pressure calculation for the moving particle semi-implicit method. Comp. Part. Mech. 2(1) (2015) DOI 10.1007/s40571-015-0039-6
- M. Celigueta, K. Deshpande, S. Latorre, E. Oñate. A FEM-DEM technique for studying the motion of particles in non-Newtonian fluids. Application to the transport of drill cuttings in wellbores. Comp. Part. Mech. 3(2) (2015) DOI 10.1007/s40571-015-0090-3
- F. Salazar, J. San-Mauro, M. Celigueta, E. Oñate. Air demand estimation in bottom outlets with the particle finite element method. Comp. Part. Mech. 4(3) (2016) DOI 10.1007/s40571-016-0117-4
- R. Bravo, P. Becker, P. Ortiz. Numerical simulation of evolutionary erodible bedforms using the particle finite element method. Comp. Part. Mech. 4(3) (2016) DOI 10.1007/s40571-016-0121-8
- M. Cremonesi, S. Meduri, U. Perego, A. Frangi. An explicit Lagrangian finite element method for free-surface weakly compressible flows. Comp. Part. Mech. 4(3) (2016) DOI 10.1007/s40571-016-0122-7
- P. Nadukandi, B. Servan-Camas, P. Becker, J. Garcia-Espinosa. Seakeeping with the semi-Lagrangian particle finite element method. Comp. Part. Mech. 4(3) (2016) DOI 10.1007/s40571-016-0127-2
- J. Marti, P. Ryzhakov. An explicit/implicit Runge–Kutta-based PFEM model for the simulation of thermally coupled incompressible flows. Comp. Part. Mech. 7(1) (2019) DOI 10.1007/s40571-019-00229-0
- M. Cremonesi, S. Meduri, U. Perego. Lagrangian–Eulerian enforcement of non-homogeneous boundary conditions in the Particle Finite Element Method. Comp. Part. Mech. 7(1) (2019) DOI 10.1007/s40571-019-00245-0
- F. Salazar, J. San-Mauro, M. Celigueta, E. Oñate. Shockwaves in spillways with the particle finite element method. Comp. Part. Mech. 7(1) (2019) DOI 10.1007/s40571-019-00252-1
- R. Bravo, P. Ortiz, S. Idelsohn, P. Becker. Sediment transport problems by the particle finite element method (PFEM). Comp. Part. Mech. 7(1) (2019) DOI 10.1007/s40571-019-00255-y
- A. Bal, T. Dang, G. Meschke. A 3D particle finite element model for the simulation of soft soil excavation using hypoplasticity. Comp. Part. Mech. 7(1) (2019) DOI 10.1007/s40571-019-00271-y
- J. Gimenez, P. Morin, N. Nigro, S. Idelsohn. Numerical Comparison of the Particle Finite Element Method Against an Eulerian Formulation. (2016) DOI 10.1007/978-3-319-40827-9_2
- K. Kamran, R. Rossi, P. Dadvand, S. Idelsohn. On the Application of Two-Fluid Flows Solver to the Casting Problem. (2014) DOI 10.1007/978-3-319-06136-8_11
- E. Oñate, A. Franci, J. Carbonell. A Particle Finite Element Method (PFEM) for Coupled Thermal Analysis of Quasi and Fully Incompressible Flows and Fluid-Structure Interaction Problems. (2014) DOI 10.1007/978-3-319-06136-8_6
- A. Jarauta, P. Ryzhakov. Challenges in Computational Modeling of Two-Phase Transport in Polymer Electrolyte Fuel Cells Flow Channels: A Review. Arch Computat Methods Eng 25(4) (2017) DOI 10.1007/s11831-017-9243-2
- S. Idelsohn, M. Mier-Torrecilla, N. Nigro, E. Oñate. On the analysis of heterogeneous fluids with jumps in the viscosity using a discontinuous pressure field. Comput Mech 46(1) (2009) DOI 10.1007/s00466-009-0448-6
- E. Oñate, M. Celigueta, S. Idelsohn, F. Salazar, B. Suárez. Possibilities of the particle finite element method for fluid–soil–structure interaction problems. Comput Mech 48(3) (2011) DOI 10.1007/s00466-011-0617-2
- E. Oñate, A. Franci, J. Carbonell. A particle finite element method for analysis of industrial forming processes. Comput Mech 54(1) (2014) DOI 10.1007/s00466-014-1016-2
Share this document
Keywords
claim authorship
Are you one of the authors of this document?