J. Vielma, A. Barbat, S. Oller. Seismic Response of RC Framed Buildings Designed According to Eurocodes. (2010) DOI 10.1007/978-94-007-0053-6_9
S. Oller, E. Oñate. Advanced Models for Finite Element Analysis of Composite Materials. (2012) DOI 10.1002/9781118097298.weoc003
A. Eijo, E. Oñate, S. Oller. A four-noded quadrilateral element for composite laminated plates/shells using the refined zigzag theory. Int. J. Numer. Meth. Engng 95(8) (2013) DOI 10.1002/nme.4503
E. Comellas, F. Bellomo, S. Oller. A generalized finite-strain damage model for quasi-incompressible hyperelasticity using hybrid formulation. Int. J. Numer. Meth. Engng 105(10) (2015) DOI 10.1002/nme.5118
S. Oller Aramayo, L. Nallim, S. Oller. An Integrated Procedure for the Structural Design of a Composite Rotor-Hydrofoil of a Water Current Turbine (WCT). Appl Compos Mater 20(6) (2013) DOI 10.1007/s10443-013-9332-9
P. Mata, A. Barbat, S. Oller, R. Boroschek. Non-linear seismic analysis of RC structures with energy-dissipating devices. Int. J. Numer. Meth. Engng 78(9) DOI 10.1002/nme.2516
L. Zhang, B. Liu, Y. Gu, X. Xu. Modelling and characterization of mechanical properties of optimized honeycomb structure. Int J Mech Mater Des (2019) DOI 10.1007/s10999-019-09462-0
E. Oñate, F. Bellomo, V. Monteiro, S. Oller, L. Nallim. Characterization of Mechanical Properties of Biological Tissue: Application to the FEM Analysis of the Urinary Bladder. (2013) DOI 10.1002/9781118402955.ch15
J. Faleiro, S. Oller, A. Barbat. Plastic‐damage analysis of reinforced concrete frames. Engineering Computations 27(1) DOI 10.1108/02644401011008522
Y. Wang, Z. Huang. Analytical Micromechanics Models for Elastoplastic Behavior of Long Fibrous Composites: A Critical Review and Comparative Study. Materials 11(10) (2018) DOI 10.3390/ma11101919
D. Carnelli, D. Gastaldi, V. Sassi, R. Contro, C. Ortiz, P. Vena. A Finite Element Model for Direction-Dependent Mechanical Response to Nanoindentation of Cortical Bone Allowing for Anisotropic Post-Yield Behavior of the Tissue. 132(8) (2010) DOI 10.1115/1.4001358
A. Pimentel, J. de Carvalho Martins Alves, N. de Seabra Merendeiro, T. Soares. Modelling strategies and FEM approaches to characterize micro-sandwich sheets with unknown core properties. Int J Mater Form 12(4) (2018) DOI 10.1007/s12289-018-1441-4
J. Vielma, A. Barbat, S. Oller. Seismic safety of low ductility structures used in Spain. Bull Earthquake Eng 8(1) (2009) DOI 10.1007/s10518-009-9127-4
F. Bellomo, S. Oller, L. Nallim. An inverse approach for the mechanical characterisation of vascular tissues via a generalised rule of mixtures. Computer Methods in Biomechanics and Biomedical Engineering 15(12) DOI 10.1080/10255842.2011.585976
S. Hassan, C. Rao, K. Babu. Development of two-phase unit cell: for modeling the deformation and failure response of quasi-brittle composites. Acta Mech 225(12) (2014) DOI 10.1007/s00707-014-1167-4
J. Vielma, A. Barbat, S. Oller. Seismic performance of waffled-slab floor buildings. Proceedings of the Institution of Civil Engineers - Structures and Buildings 162(3) DOI 10.1680/stbu.2009.162.3.169
X. Martinez, S. Oller. Numerical Simulation of Matrix Reinforced Composite Materials Subjected to Compression Loads. Arch Computat Methods Eng 16(4) (2009) DOI 10.1007/s11831-009-9036-3