Abstract

The asymmetric Stockbridge vibration damper is commonly employed in overhead power cables to mitigate Aeolian vibration, which is the oscillation of conductor cables within the 3–150 Hz frequency range. The damper's effectiveness is determined by its resonant frequencies, which increase power dissipation to exceed the wind-induced power input. While the basic symmetric Stockbridge damper has two resonant frequencies, the asymmetric version can exhibit up to four. Previous studies have shown that changes in the counterweight's geometry can increase the natural frequencies. This paper presents experiments on a modified asymmetric damper and uses an analytical model from Vaja et al. (2018), to confirm their findings. employed in overhead transmission lines to mitigate Aeolian vibration

Full Paper

The PDF file did not load properly or your web browser does not support viewing PDF files. Download directly to your device: Download PDF document
Back to Top

Document information

Published on 30/06/24
Accepted on 30/06/24
Submitted on 30/06/24

Volume Structural Mechanics, Dynamics and Engineering, 2024
DOI: 10.23967/wccm.2024.079
Licence: CC BY-NC-SA license

Document Score

0

Views 0
Recommendations 0

Share this document

claim authorship

Are you one of the authors of this document?