Basic study for propagation characteristics of elastic wave around subsurface cavities

Abstract

This study examines the detection of subsurface cavities using seismic wave propagation. Both vertical and horizontal excitation methods were employed to measure the reflection characteristics of artificially constructed cavities in a test field. The study was conducted at the Le Petau golf course in the town of Abira, Hokkaido, Japan. In this study, a new horizontal excitation technique was introduced along with conventional vertical excitation to compare its effectiveness in identifying wave reflections caused by cavities. An artificial cavity was created using rubber balloons reinforced with cardboard to simulate subsurface anomalies. The measurement used 24 geophones connected to an automatic data logger, and the acquired data underwent extensive analysis with bandpass filtering, amplitude normalization, and deconvolution to elucidate the interaction between the elastic waves and the subsurface structures. The results showed that horizontal excitation provided a clearer view of the cavity due to reflected waves. This is because only SH waves are excited and observed in the horizontal excitation mode. However, this study also recognized that it is difficult to distinguish the boundary between direct and reflected waves at shallow cavity depths, suggesting the need for excitation methods capable of generating shorter wavelengths to improve resolution. This study highlights the potential of integrating vertical and horizontal excitation methods in seismic surveys to enhance subsurface cavity exploration, and highlights future research issues, such as improving waveform analysis techniques and searching for alternative excitation sources, to advance the field of subsurface exploration.