D. Lins, S. Franke
The end-grain bonding of timber components with the Timber Structures 3.0 technology (TS3) is an emerging construction method in timber engineering. For onsite applications at low ambient temperatures down to 0 °C, it is being investigated numerically and experimentally if it’s possible to heat the butt-joint to above 17 °C during the curing process using a heating wire. The current research results show that this is basically possible.
Keywords:
Published on 05/07/22Submitted on 05/07/22
Volume 1600 Geomechanics and Natural Materials, 2022DOI: 10.23967/wccm-apcom.2022.104Licence: CC BY-NC-SA license
Views 5Recommendations 0
Are you one of the authors of this document?