Abstract

Radar sensors become typical components for automotive driver assistance systems and autonomous driving. The widespread use of this sensor type leads to an increasing risk of unwanted interferences. Those interferences can severely degrade the detection performance and cause sensor blindness. To overcome this problem, this paper describes a method to estimate and remove interfering signals in data of chirp sequence modulated radars. The estimation is derived theoretically and applied on simulation and measurement data.


Original document

The different versions of the original document can be found in:

http://nbn-resolving.de/urn:nbn:de:bsz:289-oparu-6951-1
http://dx.doi.org/10.23919/irs.2017.8008126
https://ieeexplore.ieee.org/document/8008126,
https://academic.microsoft.com/#/detail/2743755738


DOIS: 10.18725/oparu-6894 10.23919/irs.2017.8008126

Back to Top

Document information

Published on 01/01/2017

Volume 2017, 2017
DOI: 10.18725/oparu-6894
Licence: CC BY-NC-SA license

Document Score

0

Views 1
Recommendations 0

Share this document

claim authorship

Are you one of the authors of this document?