F. Norouzi, H. Dashti Naserabadi, M. Jamshidi
This study, proposes a new lateral load resisting system for high-rise (Reinforced Concrete) RC frames, which includes friction damper-superelastic SMA wires. The proposed SMA-friction damper can not only regulate the mechanism of frictional energy dissipation components with its self-centering SMA wires according to the design method based on the proposed performance, which is able to provide a hysteretic behavior and high self-centering capacity with the lowest SMA consumption but also has some advantages such as simple configuration and economic application. In this paper, two high-rise 18 and 22-story RC frames were designed in two design modes of common and with the proposed damper. The nonlinear time history analysis subjected to 10 far-field earthquakes performed in Opensees software. The results of the analyses showed that using the proposed SMA-friction damper, in addition to the effective increase in ductility, lateral stiffness and lateral strength, provided an excellent self-centering capacity, which resulted to the significant reduction in the maximum drift and the residual deformations in the structure.
Keywords:
[[ manuscript norouzi.docx
Published on 11/11/21Accepted on 01/01/21Submitted on 27/09/20
Volume 37, Issue 4, 2021DOI: 10.23967/j.rimni.2021.11.001Licence: CC BY-NC-SA license
Views 207Recommendations 0
Are you one of the authors of this document?