1 Title, abstract and keywords
2 The main text
3 Bibliography
4 Acknowledgments
5 References
Back to Top
Document information
Published on 01/01/2014
DOI: 10.1016/j.tafmec.2013.12.002
Licence: CC BY-NC-SA license
Web of Science Core Collection® Times cited: 165
Crossref Cited-by Times cited: 180
OpenCitations.net Times cited: 59
OpenCitations.net - Citing documents:
- N. Duc, T. Trinh, T. Van Do, D. Doan. On the Buckling Behavior of Multi-cracked FGM Plates. (2018) DOI 10.1007/978-981-10-7149-2_3
- A. Liao, H. Shang, X. Kou, J. Huang, X. Zhuang. Modeling of 3D Inflatable Large Deformation Air Plug in Contact With Concrete Lining. (2018) DOI 10.1007/978-981-10-7149-2_8
- R. Drathi. Impact Resistance of Concrete Structures. Mathematical Problems in Engineering 2015 DOI 10.1155/2015/494617
- P. Weißgraeber, D. Leguillon, W. Becker. A review of Finite Fracture Mechanics: crack initiation at singular and non-singular stress raisers. Arch Appl Mech 86(1-2) (2015) DOI 10.1007/s00419-015-1091-7
- P. Budarapu, T. Rabczuk. Multiscale Methods for Fracture: A Review $$^igstar $$ ★. J Indian Inst Sci 97(3) (2017) DOI 10.1007/s41745-017-0041-5
- R. Rangarajan, M. Chiaramonte, M. Hunsweck, Y. Shen, A. Lew. Simulating curvilinear crack propagation in two dimensions with universal meshes. Int. J. Numer. Meth. Engng 102(3-4) (2014) DOI 10.1002/nme.4731
- P. Farrell, C. Maurini. Linear and nonlinear solvers for variational phase-field models of brittle fracture. Int. J. Numer. Meth. Engng 109(5) (2016) DOI 10.1002/nme.5300
- E. Kakouris, S. Triantafyllou. Phase-field material point method for brittle fracture. Int J Numer Methods Eng 112(12) (2017) DOI 10.1002/nme.5580
- T. Rabczuk, X. Zhuang. Meshless Discretization Methods. (2017) DOI 10.1007/978-3-662-53605-6_15-1
- R. Khademi-Zahedi, P. Alimouri. Finite Element Analysis to the Effect of Thermo-Mechanical Loads on Stress Distribution in Buried Polyethylene Gas Pipes Jointed by Electrofusion Sockets, Repaired by PE Patches. Energies 11(10) (2018) DOI 10.3390/en11102818
- J. Reinoso, P. Durand, P. Budarapu, M. Paggi. Crack Patterns in Heterogenous Rocks Using a Combined Phase Field-Cohesive Interface Modeling Approach: A Numerical Study. Energies 12(6) (2019) DOI 10.3390/en12060965
- T. Vo-Duy, N. Nguyen-Minh, H. Dang-Trung, A. Tran-Viet, T. Nguyen-Thoi. Damage assessment of laminated composite beam structures using damage locating vector (DLV) method. Front. Struct. Civ. Eng. 9(4) (2015) DOI 10.1007/s11709-015-0303-0
- A. Asadpour. Thermo-elastic extended meshfree method for fracture without crack tip enrichment. Front. Struct. Civ. Eng. 9(4) (2015) DOI 10.1007/s11709-015-0319-5
- P. Budarapu, S. Y B, R. Natarajan. Design concepts of an aircraft wing: composite and morphing airfoil with auxetic structures. Front. Struct. Civ. Eng. 10(4) (2016) DOI 10.1007/s11709-016-0352-z
- N. Nariman. Influence of fluid-structure interaction on vortex induced vibration and lock-in phenomena in long span bridges. Front. Struct. Civ. Eng. 10(4) (2016) DOI 10.1007/s11709-016-0353-y
- A. Parsaie, A. Haghiabi, M. Saneie, H. Torabi. Predication of discharge coefficient of cylindrical weir-gate using adaptive neuro fuzzy inference systems (ANFIS). Front. Struct. Civ. Eng. 11(1) (2017) DOI 10.1007/s11709-016-0354-x
- N. Nariman. Control efficiency optimization and Sobol’s sensitivity indices of MTMDs design parameters for buffeting and flutter vibrations in a cable stayed bridge. Front. Struct. Civ. Eng. 11(1) (2017) DOI 10.1007/s11709-016-0356-8
- N. Nariman. A novel structural modification to eliminate the early coupling between bending and torsional mode shapes in a cable stayed bridge. Front. Struct. Civ. Eng. 11(2) (2017) DOI 10.1007/s11709-016-0376-4
- Y. Shen, P. He, X. Zhuang. Fracture model for the prediction of the electrical percolation threshold in CNTs/Polymer composites. Front. Struct. Civ. Eng. 12(1) (2017) DOI 10.1007/s11709-017-0396-8
- N. Nariman. Kinetic energy based model assessment and sensitivity analysis of vortex induced vibration of segmental bridge decks. Front. Struct. Civ. Eng. 11(4) (2017) DOI 10.1007/s11709-017-0435-5
- J. Zhao, H. Tang, S. Xue. A new fracture criterion for peridynamic and dual-horizon peridynamics. Front. Struct. Civ. Eng. 12(4) (2017) DOI 10.1007/s11709-017-0447-1
- N. Nguyen-Minh, N. Tran-Van, T. Bui-Xuan, T. Nguyen-Thoi. Static analysis of corrugated panels using homogenization models and a cell-based smoothed mindlin plate element (CS-MIN3). Front. Struct. Civ. Eng. 13(2) (2018) DOI 10.1007/s11709-017-0456-0
- N. Nariman. Thermal fluid-structure interaction and coupled thermal-stress analysis in a cable stayed bridge exposed to fire. Front. Struct. Civ. Eng. 12(4) (2018) DOI 10.1007/s11709-018-0452-z
- N. Nariman, T. Lahmer, P. Karampour. Uncertainty quantification of stability and damage detection parameters of coupled hydrodynamic-ground motion in concrete gravity dams. Front. Struct. Civ. Eng. 13(2) (2018) DOI 10.1007/s11709-018-0462-x
- T. Vo-Duy, V. Ho-Huu, T. Nguyen-Thoi. Free vibration analysis of laminated FG-CNT reinforced composite beams using finite element method. Front. Struct. Civ. Eng. 13(2) (2018) DOI 10.1007/s11709-018-0466-6
- L. Mauludin, C. Oucif. The effects of interfacial strength on fractured microcapsule. Front. Struct. Civ. Eng. 13(2) (2018) DOI 10.1007/s11709-018-0469-3
- E. Norouzi, H. Moslemzadeh, S. Mohammadi. Maximum entropy based finite element analysis of porous media. Front. Struct. Civ. Eng. 13(2) (2018) DOI 10.1007/s11709-018-0470-x
- F. Amiri. High-order phase-field model with the local and second-order max-entropy approximants. Front. Struct. Civ. Eng. 13(2) (2018) DOI 10.1007/s11709-018-0475-5
- G. Huynh, X. Zhuang, H. Nguyen-Xuan. Implementation aspects of a phase-field approach for brittle fracture. Front. Struct. Civ. Eng. 13(2) (2018) DOI 10.1007/s11709-018-0477-3
- P. He, Y. Shen, Y. Gu, P. Shen. 3D fracture modelling and limit state analysis of prestressed composite concrete pipes. Front. Struct. Civ. Eng. 13(1) (2018) DOI 10.1007/s11709-018-0484-4
- S. Samanta, S. Nanthakumar, R. Annabattula, X. Zhuang. Detection of void and metallic inclusion in 2D piezoelectric cantilever beam using impedance measurements. Front. Struct. Civ. Eng. 13(3) (2018) DOI 10.1007/s11709-018-0496-0
- S. Wang, X. Jiang, Y. Bai. The influence of hand hole on the ultimate strength and crack pattern of shield tunnel segment joints by scaled model test. Front. Struct. Civ. Eng. 13(5) (2019) DOI 10.1007/s11709-019-0546-2
- N. Nariman, R. Hussain, I. Mohammad, P. Karampour. Global sensitivity analysis of certain and uncertain factors for a circular tunnel under seismic action. Front. Struct. Civ. Eng. 13(6) (2019) DOI 10.1007/s11709-019-0548-0
- S. Maleki, R. Rafiee, A. Hasannia, M. Habibagahi. Investigating the influence of delamination on the stiffness of composite pipes under compressive transverse loading using cohesive zone method. Front. Struct. Civ. Eng. 13(6) (2019) DOI 10.1007/s11709-019-0555-1
- J. Song, Y. Fu, T. Kim, Y. Yoon, J. Michopoulos, T. Rabczuk. Phase field simulations of coupled microstructure solidification problems via the strong form particle difference method. Int J Mech Mater Des 14(4) (2017) DOI 10.1007/s10999-017-9386-1
- S. Zhou, C. Xia. Propagation and coalescence of quasi-static cracks in Brazilian disks: an insight from a phase field model. Acta Geotech. 14(4) (2018) DOI 10.1007/s11440-018-0701-2
- A. Huerta, T. Belytschko, S. Fernández-Méndez, T. Rabczuk, X. Zhuang, M. Arroyo. Meshfree Methods. (2017) DOI 10.1002/9781119176817.ecm2005
- F. Perazzo, F. Marchant. Análisis comparativo entre funciones de forma maxent y de mínimos cuadrados ponderados en un método sin malla de colocación. Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería 33(3-4) DOI 10.1016/j.rimni.2016.07.003
- Y. Hou, W. Sun, Y. Huang, M. Ayatollahi, L. Wang, J. Zhang. Diffuse Interface Model to Investigate the Asphalt Concrete Cracking Subjected to Shear Loading at Low Temperature. J. Cold Reg. Eng. 31(2) DOI 10.1061/(asce)cr.1943-5495.0000116
- N. Mitchell, V. Koning, V. Vitelli, W. Irvine. Fracture in sheets draped on curved surfaces. Nature Mater 16(1) (2016) DOI 10.1038/nmat4733
- P. Areias, J. de Sá, R. Cardoso. A simple assumed-strain quadrilateral shell element for finite strains and fracture. Engineering with Computers 31(4) (2014) DOI 10.1007/s00366-014-0376-8
- J. Wu, D. Wang, Z. Lin, D. Qi. An efficient gradient smoothing meshfree formulation for the fourth-order phase field modeling of brittle fracture. Comp. Part. Mech. 7(2) (2019) DOI 10.1007/s40571-019-00240-5
- N. Trask, P. Kuberry. Compatible meshfree discretization of surface PDEs. Comp. Part. Mech. 7(2) (2019) DOI 10.1007/s40571-019-00251-2
- X. Li, D. Chu, Y. Gao, Z. Liu. Numerical study on crack propagation in linear elastic multiphase composite materials using phase field method. Engineering Computations 36(1) DOI 10.1108/ec-03-2018-0116
- Z. Ullah, W. Coombs, C. Augarde. Parallel computations in nonlinear solid mechanics using adaptive finite element and meshless methods. Engineering Computations 33(4) DOI 10.1108/ec-06-2015-0166
- F. Confalonieri, A. Ghisi, U. Perego. Blade cutting of thin walled structures by explicit dynamics finite elements. Meccanica 53(6) (2017) DOI 10.1007/s11012-017-0779-x
- Z. Liu, Q. Lu, Y. Sun, X. Tang, Z. Shao, Z. Weng. Investigation of the Influence of Natural Cavities on Hydraulic Fracturing Using Phase Field Method. Arab J Sci Eng 44(12) (2019) DOI 10.1007/s13369-019-04122-z
- T. Thai, T. Rabczuk, X. Zhuang. Numerical study for cohesive zone model in delamination analysis based on higher-order B-spline functions. J. Micromech. Mol. Phys. 02(01) (2017) DOI 10.1142/s2424913017500047
- T. Zhang, E. Fang, P. Liu, J. Lua. Modeling and simulation of the second Sandia challenge problem using phantom paired shell element: characterization of material anisotropy and rate-dependency. Int J Fract 198(1-2) (2016) DOI 10.1007/s10704-016-0094-x
- V. Nguyen, G. Nguyen, C. Nguyen, L. Shen, D. Dias-da-Costa, A. El-Zein, F. Maggi. Modelling complex cracks with finite elements: a kinematically enriched constitutive model. Int J Fract 203(1-2) (2016) DOI 10.1007/s10704-016-0114-x
- J. Chen, Y. Feng, W. Shu. An improved solution for beam on elastic foundation using quintic displacement functions. KSCE J Civ Eng 20(2) (2015) DOI 10.1007/s12205-015-0424-y
- N. Nariman. Aerodynamic stability parameters optimization and global sensitivity analysis for a cable stayed Bridge. KSCE J Civ Eng 21(5) (2016) DOI 10.1007/s12205-016-0962-y
- Q. Dong, C. Xiong, C. Ma, H. Wei. Experimental Study on Cracking Behaviour of Intermittent Double S-shaped Fissures under Uniaxial Compression. KSCE J Civ Eng 23(6) (2019) DOI 10.1007/s12205-019-1858-4
- V. Carollo, T. Guillén-Hernández, J. Reinoso, M. Paggi. Recent advancements on the phase field approach to brittle fracture for heterogeneous materials and structures. Adv. Model. and Simul. in Eng. Sci. 5(1) (2018) DOI 10.1186/s40323-018-0102-y
- T. Gerasimov, N. Noii, O. Allix, L. De Lorenzis. A non-intrusive global/local approach applied to phase-field modeling of brittle fracture. Adv. Model. and Simul. in Eng. Sci. 5(1) (2018) DOI 10.1186/s40323-018-0105-8
- T. Chau-Dinh, Q. Nguyen-Duy, H. Nguyen-Xuan. Improvement on MITC3 plate finite element using edge-based strain smoothing enhancement for plate analysis. Acta Mech 228(6) (2017) DOI 10.1007/s00707-017-1818-3
- J. Huang, N. Nguyen-Thanh, K. Zhou. Extended isogeometric analysis based on Bézier extraction for the buckling analysis of Mindlin–Reissner plates. Acta Mech 228(9) (2017) DOI 10.1007/s00707-017-1861-0
- X. Zhang, C. Vignes, S. Sloan, D. Sheng. Numerical evaluation of the phase-field model for brittle fracture with emphasis on the length scale. Comput Mech 59(5) (2017) DOI 10.1007/s00466-017-1373-8
- J. Reinoso, M. Paggi, C. Linder. Phase field modeling of brittle fracture for enhanced assumed strain shells at large deformations: formulation and finite element implementation. Comput Mech 59(6) (2017) DOI 10.1007/s00466-017-1386-3
Share this document
Keywords
claim authorship
Are you one of the authors of this document?