B. Alfarah, F. López-Almansa, S. Oller. Numerical Study on the Relevance of Columns Hidden Failure Modes in the Seismic Capacity of Non-Ductile RC Frames. Journal of Earthquake Engineering (2018) DOI 10.1080/13632469.2018.1458666
M. Hanif, Z. Ibrahim, M. Jameel, K. Ghaedi, H. Hashim. Simulation-based non-linear vibration model for damage detection in RC beams. European Journal of Environmental and Civil Engineering (2019) DOI 10.1080/19648189.2019.1578270
Y. Lee, IISO Inc., Seoul, 06978, Korea, D. Kim, J. Park. Two-Dimensional Model Analysis for Extended Finite Element Method(XFEM) Verification of General Purpose Finite Element Analysis Program. JCSEIK 31(4) DOI 10.7734/coseik.2018.31.4.199
A. Nekmouche, M. Hamizi, N. Khelil, A. Kezmane. Simplified models to control plastic hinges in reinforced concrete frame structures. Asian J Civ Eng 19(1) (2017) DOI 10.1007/s42107-017-0002-3
C. Yoon, Professor, Department of Civil Engineering, Hongik University. An Automated Adaptive Finite Element Mesh Generation for Dynamics. J. Earthq. Eng. Soc. Korea 23(1) DOI 10.5000/eesk.2019.23.1.083
K. Liu, Y. Li, F. Wang, H. Xie, H. Pang, H. Bai. Analytical and Model Studies on Behavior of Rigid Polyurethane Composite Aggregate under Compression. J. Mater. Civ. Eng. 31(3) DOI 10.1061/(asce)mt.1943-5533.0002641
A. Szcześniak, A. Stolarski. Dynamic Relaxation Method for Load Capacity Analysis of Reinforced Concrete Elements. Applied Sciences 8(3) (2018) DOI 10.3390/app8030396
S. Jamali, T. Chan, A. Nguyen, D. Thambiratnam. Reliability-based load-carrying capacity assessment of bridges using structural health monitoring and nonlinear analysis. Structural Health Monitoring 18(1) (2018) DOI 10.1177/1475921718808462
F. Xue, F. Li. Characterization of damage and toughness of 5052 aluminum alloy based on continuum damage mechanics. IOP Conf. Ser.: Mater. Sci. Eng. 452 (2018) DOI 10.1088/1757-899x/452/2/022046
C. Gasser, M. Goldgruber, C. Bucher. Seismic Fragility Curves of an Arch Dam With Special Regard to Ultimate Limit State. 5(4) (2019) DOI 10.1115/1.4044151
H. Pak, M. Kang, J. Kang, S. Kee, B. Choi. A Numerical Study on the Thermo-mechanical Response of a Composite Beam Exposed to Fire. Int J Steel Struct 18(4) (2018) DOI 10.1007/s13296-018-0094-y
A. Raza, Q. Khan, A. Ahmad. Numerical Investigation of Load-Carrying Capacity of GFRP-Reinforced Rectangular Concrete Members Using CDP Model in ABAQUS. Advances in Civil Engineering 2019 DOI 10.1155/2019/1745341