A. Arcos Jiménez, C. Gómez Muñoz, F. García Márquez. Machine Learning for Wind Turbine Blades Maintenance Management. Energies 11(1) (2017) DOI 10.3390/en11010013
H. Mei, A. Migot, M. Haider, R. Joseph, M. Bhuiyan, V. Giurgiutiu. Vibration-Based In-Situ Detection and Quantification of Delamination in Composite Plates. Sensors 19(7) (2019) DOI 10.3390/s19071734
K. Jagtap, H. Nawale, S. Roy. Delamination Study of Sandwich Beam Coupled with Piezoelectric Actuator Using Cohesive Surface Behavior. (2017) DOI 10.1007/978-3-319-53556-2_28
S. Lu, M. Jiang, L. Jia, Q. Sui, Y. Sai. CFRP damage identification system based on FBG sensors and ELM method. Opt Rev 22(1) (2015) DOI 10.1007/s10043-015-0049-x
M. Porcu, L. Pieczonka, A. Frau, W. Staszewski, F. Aymerich. Assessing the Scaling Subtraction Method for Impact Damage Detection in Composite Plates. J Nondestruct Eval 36(2) (2017) DOI 10.1007/s10921-017-0413-9
S. Esola, I. Bartoli, S. Horner, J. Zheng, A. Kontsos. Defect Detection via Instrumented Impact in Thick-Sectioned Laminate Composites. J Nondestruct Eval 36(3) (2017) DOI 10.1007/s10921-017-0422-8
M. Mahmod, E. Bakar, R. Ramzi, M. Harimon, N. Abdul Latif, M. Mustapa, A. Ismail. Artificial Neural Network Application for Damages Classification in Fibreglass Pre-impregnated Laminated Composites (FGLC) from Ultrasonic Signal. (2019) DOI 10.1007/978-981-13-6447-1_72
保. 胥. The Analysis and Verification of the Acoustic Emission Lamb Wave Mode in the Thin Plate. OJAV 07(02) DOI 10.12677/ojav.2019.72006
S. Rucevskis, R. Janeliukstis, P. Akishin, A. Chate. Mode shape-based damage detection in plate structure without baseline data. Struct. Control Health Monit. 23(9) (2016) DOI 10.1002/stc.1838
W. Xu, M. Cao, M. Radzieński, W. Ostachowicz. A damage index for identifying incipient delamination in CFRP laminated plates relying on 2D multi-resolution modal Teager-Kaiser energy. DOI 10.1117/12.2295189
M. Yetmez, L. Kocer, H. Erdogan, I. Demirci. Vibro-acoustic analysis of post-impacted sandwich panels. Mat.-wiss. u. Werkstofftech 46(4-5) (2015) DOI 10.1002/mawe.201500419
B. Xu, J. Wu, M. Wang. Study of modal acoustic emission to monitor the impact damage in a composite plate. J VIBROENG 19(5) DOI 10.21595/jve.2017.17879
G. Gomes, F. de Almeida, S. da Cunha, A. Ancelotti. An estimate of the location of multiple delaminations on aeronautical CFRP plates using modal data inverse problem. Int J Adv Manuf Technol 99(5-8) (2018) DOI 10.1007/s00170-018-2502-z
S. Wirtz, N. Beganovic, D. Söffker. Investigation of damage detectability in composites using frequency-based classification of acoustic emission measurements. Structural Health Monitoring 18(4) (2018) DOI 10.1177/1475921718791894
Z. Sharif Khodaei, M. Aliabadi. A Multi-Level Decision Fusion Strategy for Condition Based Maintenance of Composite Structures. Materials 9(9) (2016) DOI 10.3390/ma9090790
D. Palumbo, U. Galietti. Damage Investigation in Composite Materials by Means of New Thermal Data Processing Procedures. Strain 52(4) (2016) DOI 10.1111/str.12179
M. Djemana, M. Hrairi. Impedance Based Detection of Delamination in Composite Structures. IOP Conf. Ser.: Mater. Sci. Eng. 184 (2017) DOI 10.1088/1757-899x/184/1/012058
E. Chok, D. Majid, M. Harmin. Effect of low velocity impact damage on the natural frequency of composite plates. IOP Conf. Ser.: Mater. Sci. Eng. 270 (2017) DOI 10.1088/1757-899x/270/1/012025
W. Xu, M. Cao, X. Li, M. Radzieński, W. Ostachowicz, R. Bai. Delamination monitoring in CFRP laminated plates under noisy conditions using complex-wavelet 2D curvature mode shapes. Smart Mater. Struct. 26(10) (2017) DOI 10.1088/1361-665x/aa8316
D. Palumbo, U. Galietti. Thermal Methods for Evaluating Flaws in Composite Materials: A New Approach to Data Analysis. (2016) DOI 10.1007/978-3-319-41766-0_32
D. Palumbo, F. Ancona, U. Galietti. Quantitative damage evaluation of composite materials with microwave thermographic technique: feasibility and new data analysis. Meccanica 50(2) (2014) DOI 10.1007/s11012-014-9981-2
Z. Juhász, T. Turcsán, T. Tóth, A. Szekrényes. Sensitivity analysis for frequency based prediction of crack size in composite plates with through-the-width delamination. International Journal of Damage Mechanics 27(6) (2017) DOI 10.1177/1056789517709893
G. Bhatia, J. Andrew, A. Arockiarajan. Experimental investigation on compressive behaviour of different patch–parent layup configurations for repaired carbon/epoxy composites. Journal of Composite Materials 53(23) (2019) DOI 10.1177/0021998318822706
I. Khan, D. Parhi. Fault detection of composite beam by using the modal parameters and RBFNN technique. J Mech Sci Technol 29(4) (2015) DOI 10.1007/s12206-015-0335-3
M. Jiang, Y. Sai, X. Geng, Q. Sui, X. Liu, L. Jia. Development of an FBG Sensor Array for Multi-Impact Source Localization on CFRP Structures. Sensors 16(10) (2016) DOI 10.3390/s16101770
A. Katunin, P. Kostka. Characterisation of Impact Damage of Composite Structures Using Wavelet-Based Fusion of Ultrasonic and Optical Images. Advanced Composites Letters 23(5) (2019) DOI 10.1177/096369351402300504