A. Pont, R. Codina, J. Baiges
The need for remeshing when computing flow problems in domains suffering large deformations has motivated the implementation of a tool that allows the proper transmission of information between finite element meshes. Because the Lagrangian projection of results from one mesh to another is a dissipative method, a new conservative interpolation method has been developed. A series of constraints, such as the conservation of mass or energy, are applied to the interpolated arrays through Lagrange multipliers in an error minimization problem, so that the resulting array satisfies these physical properties while staying as close as possible to the original interpolated values in the L2 norm. Unlike other conservative interpolation methods that require a considerable effort in mesh generation and modification, the proposed formulation is mesh independent and is only based on the physical properties of the field being interpolated. Moreover, the performed corrections are neither coupled with the main calculation nor with the interpolation itself, for which reason the computational cost is very low.
Keywords:
Published on 01/01/2017
DOI: 10.1002/nme.5444Licence: CC BY-NC-SA license
Times cited: 2Views 3Recommendations 0
Are you one of the authors of this document?
