A. Klassen, A. Bouguecha, B. Behrens. Wear Prediction for Hot Forging Dies under Consideration of Structure Modification in the Surface Layer. AMR 1018 (2014) DOI 10.4028/www.scientific.net/amr.1018.341
H. Baudriller, P. Chabrand, D. Moukoko. Modeling UHMWPE wear debris generation. J. Biomed. Mater. Res. 80B(2) (2007) DOI 10.1002/jbm.b.30620
Z. Xia, F. Ren. Die Wear Severity Diagram and Simulation. (2007) DOI 10.4271/2007-01-1694
H. Dhia, M. Torkhani. Modeling and computation of fretting wear of structures under sharp contact. Int. J. Numer. Meth. Engng. 85(1) (2010) DOI 10.1002/nme.2958
V. Hegadekatte, N. Huber, O. Kraft. Finite element based simulation of dry sliding wear. Modelling Simul. Mater. Sci. Eng. 13(1) (2004) DOI 10.1088/0965-0393/13/1/005
V. Hegadekatte, N. Huber, O. Kraft. Modeling and simulation of wear in a pin on disc tribometer. Tribol Lett 24(1) (2006) DOI 10.1007/s11249-006-9144-2
C. de Saracibar, R. Boman, P. Bussetta, J. Cajas, M. Cervera, M. Chiumenti, A. Coll, P. Dadvand, J. Hernández Ortega, G. Houzeaux, M. de Riera, J. Ponthot. Numerical Methods. (2016) DOI 10.1002/9783527693566.ch7
A. Mijar, J. Arora. Study of variational inequality and equality formulations for elastostatic frictional contact problems. ARCO 7(4) DOI 10.1007/bf02736213
M. Champagne, M. Renouf, Y. Berthier. Modeling Wear for Heterogeneous Bi-Phasic Materials Using Discrete Elements Approach. 136(2) (2014) DOI 10.1115/1.4026053
A. Zmitrowicz. An analysis of wear processes of materials based on variational methods. Mathematics and Mechanics of Solids 23(3) (2017) DOI 10.1177/1081286517734895
P. Flores, J. Ambrósio, J. Claro, H. Lankarani, C. Koshy. Lubricated revolute joints in rigid multibody systems. Nonlinear Dyn 56(3) (2008) DOI 10.1007/s11071-008-9399-2
H. Baudriller, P. Chabrand, F. Dubois. Failure of Total Hip Arthroplasties. Numerical Modeling of Debris Formation through Plastic Strains. Computer Methods in Biomechanics and Biomedical Engineering 7(4) DOI 10.1080/10255840412331290604
M. Vaz, D. Owen, V. Kalhori, M. Lundblad, L. Lindgren. Modelling and Simulation of Machining Processes. Arch Computat Methods Eng 14(2) (2007) DOI 10.1007/s11831-007-9005-7
N. Dialami, M. Chiumenti, M. Cervera, C. Agelet de Saracibar. Challenges in Thermo-mechanical Analysis of Friction Stir Welding Processes. Arch Computat Methods Eng 24(1) (2016) DOI 10.1007/s11831-015-9163-y