G. Pijaudier-Cabot, L. Bodé, A. Huerta
Nonlocal models guaranty that finite element computations on strain materials remain sound up to failure from a theoretical and computational viewpoint. The non-locality prevents strain localization with zero global dissipation of energy, and consequently finite element calculations converge upon mesh refinements. One of the major drawbacks of these models is that the element size needed in order to capture the localization zone, must be smaller than the internal length. Hence, the total number of degrees of freedom becomes rapidly prohibitive for most engineering applications and there is an obvious need for mesh adaptivity. This paper deals with the application of the arbitrary Lagrangian-Eulerian (ALE) formulation, well known in hydrodynamics and fluid-structure interaction problems, to transient strain localization in a nonlocal damageable material. It is shown that the ALE formulation which is employed in large boundary motion problems, can also be well suited for nonlinear transient analysis of softening materials where localization bands appear. The remeshing strategy is based on the equi-distribution of an indicator that quantifies the interelement jump of a selected state variable. Two well-known one-dimensional examples illustrate the capabilities of this technique: the first one deals with localization due to a propagating wave in a bar, and the second one studies the wave propagation in a hollow sphere.
Published on 01/01/1994
Licence: CC BY-NC-SA license
Views 1Recommendations 0
Are you one of the authors of this document?