M. Velea, S. Lache. Decision Making Process on Multi-Objective Optimization Results. IJMMM 4(3) (2015) DOI 10.7763/ijmmm.2016.v4.259
S. Oller Aramayo, L. Nallim, S. Oller. An Integrated Procedure for the Structural Design of a Composite Rotor-Hydrofoil of a Water Current Turbine (WCT). Appl Compos Mater 20(6) (2013) DOI 10.1007/s10443-013-9332-9
Z. Sun, C. Wang, X. Niu, Y. Song. Design Optimization Method for Composite Components Based on Moment Reliability-Sensitivity Criteria. 34(3) DOI 10.1515/tjj-2016-0003
A. Todoroki, T. Ozawa. Warping thermal deformation constraint for optimization of a blade stiffened composite panel using GA. International Journal of Aeronautical and Space Sciences 14(4) DOI 10.5139/ijass.2013.14.4.334
K. Dems, J. Turant, E. Radaszewska. Optimal design of thermal loaded composites filled with curvilinear fibers. Struct Multidisc Optim 55(4) (2016) DOI 10.1007/s00158-016-1555-6
A. Ghasemi, M. Hajmohammad. Multi-objective optimization of laminated composite shells for minimum mass/cost and maximum buckling pressure with failure criteria under external hydrostatic pressure. Struct Multidisc Optim 55(3) (2016) DOI 10.1007/s00158-016-1559-2
M. Cococcioni. mspMEA: The Microcones Separation Parallel Multiobjective Evolutionary Algorithm and Its Application to Fuzzy Rule-Based Ship Classification. (2015) DOI 10.1007/978-3-319-26450-9_17
N. Benard, J. Pons-Prats, J. Periaux, G. Bugeda, P. Braud, J. Bonnet, E. Moreau. Turbulent separated shear flow control by surface plasma actuator: experimental optimization by genetic algorithm approach. Exp Fluids 57(2) (2016) DOI 10.1007/s00348-015-2107-3
J. Pons-Prats, M. Coma, J. Betran, X. Roca, G. Bugeda. Industrial Application of Genetic Algorithms to Cost Reduction of a Wind Turbine Equipped with a Tuned Mass Damper. (2018) DOI 10.1007/978-3-319-89890-2_27
A. Şerban. Fast and robust Matlab-based finite element model used in the layup optimization of composite laminates. IOP Conf. Ser.: Mater. Sci. Eng. 147 (2016) DOI 10.1088/1757-899x/147/1/012103
Y. Zheng, J. Chen. Anti-buckling design of variable stiffness composite cylinder under combined loading based on the multi-objective optimization method. IOP Conf. Ser.: Mater. Sci. Eng. 372 (2018) DOI 10.1088/1757-899x/372/1/012034
J. Bachmann, X. Yi, H. Gong, X. Martinez, G. Bugeda, S. Oller, K. Tserpes, E. Ramon, C. Paris, P. Moreira, Z. Fang, Y. Li, Y. Liu, X. Liu, G. Xian, J. Tong, J. Wei, X. Zhang, J. Zhu, S. Ma, T. Yu. Outlook on ecologically improved composites for aviation interior and secondary structures. CEAS Aeronaut J 9(3) (2018) DOI 10.1007/s13272-018-0298-z
N. Patel, D. Sharma. An analytical investigation of the best stacking sequence of a symmetric laminated composite plate weakened by a hole. Mathematics and Mechanics of Solids 24(5) (2018) DOI 10.1177/1081286518797158
H. Rahami, A. Kaveh, I. Shojaei. Swift Analysis for Size and Geometry Optimization of Structures. Advances in Structural Engineering 18(3) (2016) DOI 10.1260/1369-4332.18.3.365