M. Hanif, Z. Ibrahim, M. Jameel, K. Ghaedi, H. Hashim. Simulation-based non-linear vibration model for damage detection in RC beams. European Journal of Environmental and Civil Engineering (2019) DOI 10.1080/19648189.2019.1578270
A. Akhaveissy, C. Desai, D. Mostofinejad, A. Vafai. FE analysis of RC structures using DSC model with yield surfaces for tension and compression. Computers & concrete 11(2) DOI 10.12989/cac.2013.11.2.123
G. Markou, M. Papadrakakis. Computationally efficient 3D finite element modeling of RC structures. Computers and Concrete 12(4) DOI 10.12989/cac.2013.12.4.443
J. Oliver. A consistent characteristic length for smeared cracking models. Int. J. Numer. Meth. Engng. 28(2) DOI 10.1002/nme.1620280214
M. Cervera, M. Chiumenti, R. Codina. Mesh objective modeling of cracks using continuous linear strain and displacement interpolations. Int. J. Numer. Meth. Engng. 87(10) (2011) DOI 10.1002/nme.3148
R. Espandar, V. Lotfi, G. Razaqpur. Influence of effective parameters of non-orthogonal smeared crack approach in seismic response of concrete arch dams. Can. J. Civ. Eng. 30(5) DOI 10.1139/l03-052
F. Barzegar, S. Maddipudi. Three-Dimensional Modeling of Concrete Structures. II: Reinforced Concrete. Journal of Structural Engineering 123(10) DOI 10.1061/(asce)0733-9445(1997)123:10(1347)
A. Jefferson. Local plastic surfaces for cracking and crushing in concrete. Proceedings of the IMechE 216(4) (2016) DOI 10.1177/146442070221600405
H. Walter, L. Baillet, M. Brunet. Modélisation 3D par éléments finis de fixations ancrées dans une structure en béton. Revue Française de Génie Civil 4(7-8) (2011) DOI 10.1080/12795119.2000.9692698
S. Khalfallah, A. Charif, M. Guenfoud. Modélisation du comportement non linéaire des structures en béton armé. Revue Française de Génie Civil 6(7-8) (2011) DOI 10.1080/12795119.2002.9692415
R. Ranjan, R. Singh, S. Sikka, A. Kakodkar. Phenomenology of Baneberry Nuclear Event Revisited with 3-D Finite Element Transient Simulation. Nuclear Technology 153(3) (2017) DOI 10.13182/nt06-a3712
S. Jeyarajan, J. Richard Liew, C. Koh. Modelling of Semi-Rigid Joints in Steel-Concrete Composite Frames. (2016) DOI 10.1061/9780784479735.032
T. Chuang, A. Chan, L. Clark. A Modified Cyclic Cracking Model for RC Structural Walls Behaviour Under Dynamic Excitation. Bull Earthquake Eng 3(3) DOI 10.1007/s10518-005-2241-z
F. Rojas, J. Anderson, L. Massone. A nonlinear quadrilateral thin flat layered shell element for the modeling of reinforced concrete wall structures. Bull Earthquake Eng 17(12) (2019) DOI 10.1007/s10518-019-00566-8
M. Braun, J. Fernández-Sáez. A 2D discrete model with a bilinear softening constitutive law applied to dynamic crack propagation problems. Int J Fract 197(1) (2016) DOI 10.1007/s10704-015-0067-5
G. Barbat, M. Cervera, M. Chiumenti. Appraisement of planar, bending and twisting cracks in 3D with isotropic and orthotropic damage models. Int J Fract 210(1-2) (2018) DOI 10.1007/s10704-018-0261-3
A. Colombo, J. Della Bella, T. Bittencourt. An algorithm for the automatic design of concrete shell reinforcement. Rev. IBRACON Estrut. Mater. 7(1) DOI 10.1590/s1983-41952014000100004