1 Title, abstract and keywords
2 The main text
3 Bibliography
4 Acknowledgments
5 References
Back to Top
Document information
Published on 01/01/2006
DOI: 10.1007/s11440-006-0019-3
Licence: CC BY-NC-SA license
Web of Science Core Collection® Times cited: 28
Crossref Cited-by Times cited: 34
OpenCitations.net Times cited: 32
OpenCitations.net - Citing documents:
- R. Rossi, A. Larese, P. Dadvand, E. Oñate. An efficient edge-based level set finite element method for free surface flow problems. Int. J. Numer. Meth. Fluids 71(6) (2012) DOI 10.1002/fld.3680
- E. Oñate, A. Franci, J. Carbonell. Lagrangian formulation for finite element analysis of quasi-incompressible fluids with reduced mass losses. Int. J. Numer. Meth. Fluids 74(10) (2014) DOI 10.1002/fld.3870
- Y. Abdelhamid, U. El Shamy. Pore-scale modeling of surface erosion in a particle bed. Int. J. Numer. Anal. Meth. Geomech. 38(2) (2013) DOI 10.1002/nag.2201
- J. Tejchman, W. Wu. FE-investigation of shear localization in granular bodies under high shear rate. Granular Matter 11(2) (2009) DOI 10.1007/s10035-009-0128-4
- H. Teufelsbauer, Y. Wang, M. Chiou, W. Wu. Flow–obstacle interaction in rapid granular avalanches: DEM simulation and comparison with experiment. Granular Matter 11(4) (2009) DOI 10.1007/s10035-009-0142-6
- H. Harshani, S. Galindo-Torres, A. Scheuermann, H. Muhlhaus. Micro-mechanical analysis on the onset of erosion in granular materials. Philosophical Magazine 95(28-30) (2015) DOI 10.1080/14786435.2015.1049237
- J. Rodriguez, J. Carbonell, J. Cante, J. Oliver. The particle finite element method (PFEM) in thermo-mechanical problems. Int. J. Numer. Meth. Engng 107(9) (2016) DOI 10.1002/nme.5186
- M. Cerquaglia, G. Deliége, R. Boman, V. Terrapon, J. Ponthot. Free-slip boundary conditions for simulating free-surface incompressible flows through the particle finite element method. Int. J. Numer. Meth. Engng 110(10) (2016) DOI 10.1002/nme.5439
- Y. Young, J. White, H. Xiao, R. Borja. Liquefaction potential of coastal slopes induced by solitary waves. Acta Geotech. 4(1) (2009) DOI 10.1007/s11440-009-0083-6
- H. Zhu, L. Zhang. Field investigation of erosion resistance of common grass species for soil bioengineering in Hong Kong. Acta Geotech. 11(5) (2015) DOI 10.1007/s11440-015-0408-6
- E. Oñate, J. García-Espinosa, S. Idelsohn, B. Serván-Camas. Ship Hydrodynamics. (2017) DOI 10.1002/9781119176817.ecm2070
- C. de Saracibar, R. Boman, P. Bussetta, J. Cajas, M. Cervera, M. Chiumenti, A. Coll, P. Dadvand, J. Hernández Ortega, G. Houzeaux, M. de Riera, J. Ponthot. Numerical Methods. (2016) DOI 10.1002/9783527693566.ch7
- A. Larese. A Lagrangian PFEM approach for non-Newtonian viscoplastic materials. Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería 33(3-4) DOI 10.1016/j.rimni.2016.07.002
- J. Carbonell, E. Oñate, B. Suárez. Modeling of Ground Excavation with the Particle Finite-Element Method. J. Eng. Mech. 136(4) DOI 10.1061/(asce)em.1943-7889.0000086
- E. Oñate, S. Idelsohn, M. Celigueta, B. Suárez. The Particle Finite Element Method (PFEM). An Effective Numerical Technique for Solving Marine, Naval and Harbour Engineering Problems. DOI 10.1007/978-94-007-6143-8_4
- F. Salazar, E. Oñate, R. Morán. Numerical modeling of landslides in reservoirs using the Particle Finite Element Method (PFEM). (2012) DOI 10.1201/b11588-39
- A. Franci. Introduction. (2016) DOI 10.1007/978-3-319-45662-1_1
- A. Franci. Unified Stabilized Formulation for Quasi-incompressible Materials. (2016) DOI 10.1007/978-3-319-45662-1_3
- E. Oñate, S. Idelsohn, M. Celigueta, R. Rossi, S. Latorre. Possibilities of the Particle Finite Element Method in Computational Mechanics. DOI 10.1007/978-3-642-05241-5_15
- E. Oñate, S. Idelsohn, M. Celigueta, R. Rossi, J. Marti, J. Carbonell, P. Ryzhakov, B. Suárez. Advances in the Particle Finite Element Method (PFEM) for Solving Coupled Problems in Engineering. (2011) DOI 10.1007/978-94-007-0735-1_1
- E. Oñate, M. Celigueta, S. Latorre, G. Casas, R. Rossi, J. Rojek. Lagrangian analysis of multiscale particulate flows with the particle finite element method. Comp. Part. Mech. 1(1) (2014) DOI 10.1007/s40571-014-0012-9
- M. Celigueta, K. Deshpande, S. Latorre, E. Oñate. A FEM-DEM technique for studying the motion of particles in non-Newtonian fluids. Application to the transport of drill cuttings in wellbores. Comp. Part. Mech. 3(2) (2015) DOI 10.1007/s40571-015-0090-3
- F. Salazar, J. San-Mauro, M. Celigueta, E. Oñate. Air demand estimation in bottom outlets with the particle finite element method. Comp. Part. Mech. 4(3) (2016) DOI 10.1007/s40571-016-0117-4
- R. Bravo, P. Becker, P. Ortiz. Numerical simulation of evolutionary erodible bedforms using the particle finite element method. Comp. Part. Mech. 4(3) (2016) DOI 10.1007/s40571-016-0121-8
- A. Franci, I. de-Pouplana, G. Casas, M. Celigueta, J. González-Usúa, E. Oñate. PFEM–DEM for particle-laden flows with free surface. Comp. Part. Mech. 7(1) (2019) DOI 10.1007/s40571-019-00244-1
- F. Salazar, J. San-Mauro, M. Celigueta, E. Oñate. Shockwaves in spillways with the particle finite element method. Comp. Part. Mech. 7(1) (2019) DOI 10.1007/s40571-019-00252-1
- R. Bravo, P. Ortiz, S. Idelsohn, P. Becker. Sediment transport problems by the particle finite element method (PFEM). Comp. Part. Mech. 7(1) (2019) DOI 10.1007/s40571-019-00255-y
- E. Oñate, A. Franci, J. Carbonell. A Particle Finite Element Method (PFEM) for Coupled Thermal Analysis of Quasi and Fully Incompressible Flows and Fluid-Structure Interaction Problems. (2014) DOI 10.1007/978-3-319-06136-8_6
- J. Rodríguez, J. Carbonell, P. Jonsén. Numerical Methods for the Modelling of Chip Formation. Arch Computat Methods Eng 27(2) (2018) DOI 10.1007/s11831-018-09313-9
- E. Oñate, M. Celigueta, S. Idelsohn, F. Salazar, B. Suárez. Possibilities of the particle finite element method for fluid–soil–structure interaction problems. Comput Mech 48(3) (2011) DOI 10.1007/s00466-011-0617-2
- E. Oñate, A. Franci, J. Carbonell. A particle finite element method for analysis of industrial forming processes. Comput Mech 54(1) (2014) DOI 10.1007/s00466-014-1016-2
- J. Rodriguez Prieto, J. Carbonell, J. Cante, J. Oliver, P. Jonsén. Generation of segmental chips in metal cutting modeled with the PFEM. Comput Mech 61(6) (2017) DOI 10.1007/s00466-017-1442-z
