N. Nash, C. Bachour, I. Manolakis, A. Comer
In this work, we conducted an extensive comparative study of the water absorption behavior and retention of mechanical properties of a group of GRP composite laminates manufactured with a range of infusible thermosetting and thermoplastics resins. All laminates were manufactured by Vacuum-Assisted Resin Transfer Moulding (VARTM; the most relevant manufacturing technique in shipbuilding) with a range of state-of-the-art thermosetting resins (Urethane acrylate Crestapol 1210, Epoxy SR1125, Bio-epoxy Supersap CLR, Phenolic Cellobond J2027X) and a novel infusible acrylic thermoplastic resin (Acrylic Elium 150). The reinforcement of choice for each laminate was a unidirectional glass fabric of 996 gsm. Sample preparation for water immersion studies was according to ASTM D5229. This study was part of a comprehensive down-selection of commercially available resins in terms of their suitability for shipbuilding applications, as part of the EU H2020 project FIBRESHIP2 . A selection of relevant properties of the laminates with different resin systems is presented in this paper including fibre volume fraction, apparent interlaminar shear strength (dry and wet condition), flexural strength (dry and wet condition) and flexural modulus (dry and wet condition).
Keywords:
Published on 28/01/19Submitted on 28/01/19
Licence: CC BY-NC-SA license
Views 68Recommendations 0
Are you one of the authors of this document?