Y. Huang, S. Kuriyama, C. Jiang. Fundamental study and theoretical analysis in a constrained-surface stereolithography system. Int J Adv Manuf Technol 24(5-6) (2004) DOI 10.1007/s00170-003-1627-9
Q. Huang, J. Zhang, A. Sabbaghi, T. Dasgupta. Optimal offline compensation of shape shrinkage for three-dimensional printing processes. IIE Transactions 47(5) (2014) DOI 10.1080/0740817x.2014.955599
Y. Zhang, Y. Chou. Three-dimensional finite element analysis simulations of the fused deposition modelling process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 220(10) (2006) DOI 10.1243/09544054jem572
Y. Zhang, K. Chou. A parametric study of part distortions in fused deposition modelling using three-dimensional finite element analysis. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 222(8) (2008) DOI 10.1243/09544054jem990
B. Karthick Raja, R. Jegan Pravin Raja, K. Karan, R. Soundararajan, P. Ashokavarthanan. Parameter Optimization for Polyamide in Selective Laser Sintering Based on Mechanical Behavior. (2018) DOI 10.1007/978-981-13-0305-0_19
P. Kulkarni, A. Marsan, D. Dutta. A review of process planning techniques in layered manufacturing. Rapid Prototyping Journal 6(1) DOI 10.1108/13552540010309859
H. Wenbin, L. Yong Tsui, G. Haiqing. A study of the staircase effect induced by material shrinkage in rapid prototyping. Rapid Prototyping Journal 11(2) DOI 10.1108/13552540510589449
C. Jiang, Y. Huang, C. Liu. Dynamic finite element analysis of photopolymerization in stereolithography. Rapid Prototyping Journal 12(3) DOI 10.1108/13552540610670753
M. Vatani, F. Barazandeh, A. Rahimi, A. Sanati Nezhad. Distortion modeling of SL parts by classical lamination theory. Rapid Prototyping Journal 18(3) DOI 10.1108/13552541211218090
C. Cheah, J. Fuh, A. Nee, L. Lu. Mechanical characteristics of fiber‐filled photo‐polymer used in stereolithography. Rapid Prototyping Journal 5(3) DOI 10.1108/13552549910278937
M. Chiumenti, X. Lin, M. Cervera, W. Lei, Y. Zheng, W. Huang. Numerical simulation and experimental calibration of additive manufacturing by blown powder technology. Part I: thermal analysis. Rapid Prototyping Journal 23(2) DOI 10.1108/rpj-10-2015-0136
A. Lin, S. Liang, J. Jeng, Y. Yeh, Y. Wong, C. Ho. Study of curing characteristicsof photopolymer used in solid laser diode plotter rapid prototyping system. Plastics, Rubber and Composites 31(4) (2013) DOI 10.1179/146580102225001373