Y. Bao, D. Zhou, Y. Zhao. A two-step Taylor-characteristic-based Galerkin method for incompressible flows and its application to flow over triangular cylinder with different incidence angles. Int. J. Numer. Meth. Fluids DOI 10.1002/fld.2054
J. Rojek, E. Oñate, R. Taylor. CBS-based stabilization in explicit solid dynamics. Int. J. Numer. Meth. Engng 66(10) DOI 10.1002/nme.1689
P. De Micheli, K. Mocellin. A new efficient explicit formulation for linear tetrahedral elements non-sensitive to volumetric locking for infinitesimal elasticity and inelasticity. Int. J. Numer. Meth. Engng 79(1) DOI 10.1002/nme.2539
C. Soyarslan, A. Tekkaya, U. Akyuz. Application of Continuum Damage Mechanics in discontinuous crack formation: Forward extrusion chevron predictions. Z. angew. Math. Mech. 88(6) DOI 10.1002/zamm.200800013
K. Chadha, D. Shahriari, R. Tremblay, P. Bhattacharjee, M. Jahazi. Deformation and Recrystallization Behavior of the Cast Structure in Large Size, High Strength Steel Ingots: Experimentation and Modeling. Metall and Mat Trans A 48(9) (2017) DOI 10.1007/s11661-017-4177-8
J. Paralikas, K. Salonitis, G. Chryssolouris. Investigation of the effect of roll forming pass design on main redundant deformations on profiles from AHSS. Int J Adv Manuf Technol 56(5-8) (2011) DOI 10.1007/s00170-011-3208-7
J. Mackerle. Finite element modelling and simulation of bulk material forming. Engineering Computations 23(3) DOI 10.1108/02644400610652983
V. Romanova, R. Balokhonov, E. Batukhtina, E. Emelianova, M. Sergeev. On the Solution of Quasi-Static Micro- and Mesomechanical Problems in a Dynamic Formulation. Phys Mesomech 22(4) (2019) DOI 10.1134/s1029959919040052
E. Postek, T. Sadowski. Temperature Effects during Impact Testing of a Two-Phase Metal-Ceramic Composite Material. Materials 12(10) (2019) DOI 10.3390/ma12101629
J. Rojek, D. Lumelskyj, S. Nosewicz, B. Romelczyk-Baishya. Numerical and experimental investigation of an elastoplastic contact model for spherical discrete elements. Comp. Part. Mech. 6(3) (2018) DOI 10.1007/s40571-018-00219-8
S. Heo, Y. Seo, T. Ku, B. Kang. Formability evaluation of dimple forming process based on numerical and experimental approach. J Mech Sci Technol 25(2) (2011) DOI 10.1007/s12206-010-1233-3
M. Oliveira, J. Alves, L. Menezes. Algorithms and Strategies for Treatment of Large Deformation Frictional Contact in the Numerical Simulation of Deep Drawing Process. Arch Computat Methods Eng 15(2) (2008) DOI 10.1007/s11831-008-9018-x