E. Gustafsson, N. Strömberg. Shape optimization of castings by using successive response surface methodology. Struct Multidisc Optim 35(1) (2007) DOI 10.1007/s00158-007-0114-6
A. Escobar, D. Celentano, M. Cruchaga, B. Schulz. On the Effect of Pouring Temperature on Spheroidal Graphite Cast Iron Solidification. Metals 5(2) (2015) DOI 10.3390/met5020628
B. Tie, D. Aubry. Adaptive Mesh Refinement for Phase-change Effects Capturing in Thermoelasticity. DOI 10.1007/0-306-46936-7_25
S. Koric, L. Hibbeler, R. Liu, B. Thomas. Multiphysics Model of Metal Solidification on the Continuum Level. Numerical Heat Transfer, Part B: Fundamentals 58(6) DOI 10.1080/10407790.2011.540954
D. Celentano, P. Dardati, L. Godoy, R. Boeri. Computational simulation of microstructure evolution during solidification of ductile cast iron. International Journal of Cast Metals Research 21(6) (2013) DOI 10.1179/136404608x370756
I. Caylak, R. Mahnken. Thermomechanical characterisation of cold box sand including optical measurements. International Journal of Cast Metals Research 23(3) (2013) DOI 10.1179/174313309x451261
A. Escobar, D. Celentano, M. Cruchaga, J. Lacaze, B. Schulz, P. Dardati, A. Parada. Experimental and numerical analysis of effect of cooling rate on thermal–microstructural response of spheroidal graphite cast iron solidification. International Journal of Cast Metals Research 27(3) (2013) DOI 10.1179/1743133613y.0000000095
R. Mahnken, I. Caylak. Optical Measurements for a Cold-Box Sand and Aspects of Direct and Inverse Problems for Micropolar Elasto-Plasticity. DOI 10.1007/978-3-642-22738-7_9