M. Mier-Torrecilla, A. Geyer, J. Phillips, S. Idelsohn, E. Oñate. Numerical simulations of negatively buoyant jets in an immiscible fluid using the Particle Finite Element Method. Int. J. Numer. Meth. Fluids 69(5) (2011) DOI 10.1002/fld.2628
R. Rossi, A. Larese, P. Dadvand, E. Oñate. An efficient edge-based level set finite element method for free surface flow problems. Int. J. Numer. Meth. Fluids 71(6) (2012) DOI 10.1002/fld.3680
E. Oñate, A. Franci, J. Carbonell. Lagrangian formulation for finite element analysis of quasi-incompressible fluids with reduced mass losses. Int. J. Numer. Meth. Fluids 74(10) (2014) DOI 10.1002/fld.3870
S. Idelsohn, J. Marti, P. Becker, E. Oñate. Analysis of multifluid flows with large time steps using the particle finite element method. Int. J. Numer. Meth. Fluids 75(9) (2014) DOI 10.1002/fld.3908
V. Nguyen, W. Park. A free surface flow solver for complex three-dimensional water impact problems based on the VOF method. Int. J. Numer. Meth. Fluids 82(1) (2015) DOI 10.1002/fld.4203
L. Sun, G. Zhao, J. Zhao. Particle manifold method (PMM): A new continuum-discontinuum numerical model for geomechanics. Int. J. Numer. Anal. Meth. Geomech. 37(12) (2012) DOI 10.1002/nag.2104
F. Salazar, J. Irazábal, A. Larese, E. Oñate. Numerical modelling of landslide-generated waves with the particle finite element method (PFEM) and a non-Newtonian flow model. Int. J. Numer. Anal. Meth. Geomech. 40(6) (2015) DOI 10.1002/nag.2428
A. Franci, E. Oñate, J. Carbonell. On the effect of the bulk tangent matrix in partitioned solution schemes for nearly incompressible fluids. Int. J. Numer. Meth. Engng 102(3-4) (2014) DOI 10.1002/nme.4839
F. Caballero, F. Salazar, J. Mauro, M. Toledo. Physical and numerical modeling for understanding the hydraulic behaviour of Wedge-Shaped-Blocks spillways. (2015) DOI 10.1201/b18292-22
J. Garcia-Espinosa, A. Valls, E. Oñate. ODDLS: A new unstructured mesh finite element method for the analysis of free surface flow problems. Int. J. Numer. Meth. Engng 76(9) DOI 10.1002/nme.2348
M. Cremonesi, A. Frangi, U. Perego. A Lagrangian finite element approach for the analysis of fluid-structure interaction problems. Int. J. Numer. Meth. Engng. (2010) DOI 10.1002/nme.2911
F. Mossaiby, R. Rossi, P. Dadvand, S. Idelsohn. OpenCL-based implementation of an unstructured edge-based finite element convection-diffusion solver on graphics hardware. Int. J. Numer. Meth. Engng 89(13) (2011) DOI 10.1002/nme.3302
C. Koh, M. Gao, C. Luo. A new particle method for simulation of incompressible free surface flow problems. Int. J. Numer. Meth. Engng 89(12) (2011) DOI 10.1002/nme.3303
S. Rodolfo Idelsohn, N. Marcelo Nigro, J. Marcelo Gimenez, R. Rossi, J. Marcelo Marti. A fast and accurate method to solve the incompressible Navier‐Stokes equations. Engineering Computations 30(2) DOI 10.1108/02644401311304854
F. Salazar, E. Oñate, R. Morán. Modelación numérica de deslizamientos de ladera en embalses mediante el Método de Partículas y Elementos Finitos (PFEM). Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería 28(2) DOI 10.1016/j.rimni.2012.03.004
D. Pozo, F. Salazar, M. Toledo. Modelación del funcionamiento hidráulico de los dispositivos de aireación de desagües de fondo de presas mediante el método de partículas y elementos finitos. Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería 30(1) DOI 10.1016/j.rimni.2012.11.002
A. Larese. A Lagrangian PFEM approach for non-Newtonian viscoplastic materials. Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería 33(3-4) DOI 10.1016/j.rimni.2016.07.002
A. Larese, R. Rossi, E. Oñate, M. Toledo, R. Morán, H. Campos. Numerical and Experimental Study of Overtopping and Failure of Rockfill Dams. Int. J. Geomech. 15(4) DOI 10.1061/(asce)gm.1943-5622.0000345
E. Oñate, S. Idelsohn, M. Celigueta, B. Suárez. The Particle Finite Element Method (PFEM). An Effective Numerical Technique for Solving Marine, Naval and Harbour Engineering Problems. DOI 10.1007/978-94-007-6143-8_4
F. Salazar, E. Oñate, R. Morán. Numerical modeling of landslides in reservoirs using the Particle Finite Element Method (PFEM). (2012) DOI 10.1201/b11588-39
I. Iaconeta, A. Larese, R. Rossi, Z. Guo. Comparison of a Material Point Method and a Galerkin Meshfree Method for the Simulation of Cohesive-Frictional Materials. Materials 10(10) (2017) DOI 10.3390/ma10101150
A. Franci. Unified Stabilized Formulation for Quasi-incompressible Materials. (2016) DOI 10.1007/978-3-319-45662-1_3
E. Oñate, S. Idelsohn, M. Celigueta, R. Rossi, S. Latorre. Possibilities of the Particle Finite Element Method in Computational Mechanics. DOI 10.1007/978-3-642-05241-5_15
E. Oñate, S. Idelsohn, M. Celigueta, R. Rossi, J. Marti, J. Carbonell, P. Ryzhakov, B. Suárez. Advances in the Particle Finite Element Method (PFEM) for Solving Coupled Problems in Engineering. (2011) DOI 10.1007/978-94-007-0735-1_1
S. Idelsohn, M. Mier-Torrecilla, J. Marti, E. Oñate. The Particle Finite Element Method for Multi-Fluid Flows. (2011) DOI 10.1007/978-94-007-0735-1_5
J. Gimenez, N. Nigro, S. Idelsohn. Evaluating the performance of the particle finite element method in parallel architectures. Comp. Part. Mech. 1(1) (2014) DOI 10.1007/s40571-014-0009-4
E. Oñate, M. Celigueta, S. Latorre, G. Casas, R. Rossi, J. Rojek. Lagrangian analysis of multiscale particulate flows with the particle finite element method. Comp. Part. Mech. 1(1) (2014) DOI 10.1007/s40571-014-0012-9
F. Salazar, J. San-Mauro, M. Celigueta, E. Oñate. Air demand estimation in bottom outlets with the particle finite element method. Comp. Part. Mech. 4(3) (2016) DOI 10.1007/s40571-016-0117-4
A. Franci, M. Cremonesi. On the effect of standard PFEM remeshing on volume conservation in free-surface fluid flow problems. Comp. Part. Mech. 4(3) (2016) DOI 10.1007/s40571-016-0124-5
A. Franci, I. de-Pouplana, G. Casas, M. Celigueta, J. González-Usúa, E. Oñate. PFEM–DEM for particle-laden flows with free surface. Comp. Part. Mech. 7(1) (2019) DOI 10.1007/s40571-019-00244-1
M. Cremonesi, S. Meduri, U. Perego. Lagrangian–Eulerian enforcement of non-homogeneous boundary conditions in the Particle Finite Element Method. Comp. Part. Mech. 7(1) (2019) DOI 10.1007/s40571-019-00245-0
F. Salazar, J. San-Mauro, M. Celigueta, E. Oñate. Shockwaves in spillways with the particle finite element method. Comp. Part. Mech. 7(1) (2019) DOI 10.1007/s40571-019-00252-1
A. Ghasemi, R. Nikbakhti, A. Ghasemi, F. Hedayati, A. Malvandi. Parallelized numerical modeling of the interaction of a solid object with immiscible incompressible two-phase fluid flow. Engineering Computations 34(3) DOI 10.1108/ec-01-2016-0016
Y. Xiao, Z. Wang, J. Zeng, j. Zheng, J. Lin, L. Zhang. Prototype and numerical studies of interference characteristics of two ski-jump jets from opening spillway gates. Engineering Computations 32(2) DOI 10.1108/ec-04-2013-0104
J. Gimenez, P. Morin, N. Nigro, S. Idelsohn. Numerical Comparison of the Particle Finite Element Method Against an Eulerian Formulation. (2016) DOI 10.1007/978-3-319-40827-9_2
E. Oñate, A. Franci, J. Carbonell. A Particle Finite Element Method (PFEM) for Coupled Thermal Analysis of Quasi and Fully Incompressible Flows and Fluid-Structure Interaction Problems. (2014) DOI 10.1007/978-3-319-06136-8_6
F. Salazar, R. Morán, R. Rossi, E. Oñate. Analysis of the discharge capacity of radial-gated spillways using CFD and ANN – Oliana Dam case study. Journal of Hydraulic Research 51(3) (2013) DOI 10.1080/00221686.2012.755714
P. Dadvand, R. Rossi, E. Oñate. An Object-oriented Environment for Developing Finite Element Codes for Multi-disciplinary Applications. Arch Computat Methods Eng 17(3) (2010) DOI 10.1007/s11831-010-9045-2
S. Idelsohn, J. Marti, A. Souto-Iglesias, E. Oñate. Interaction between an elastic structure and free-surface flows: experimental versus numerical comparisons using the PFEM. Comput Mech 43(1) (2008) DOI 10.1007/s00466-008-0245-7
E. Lins, R. Elias, F. Rochinha, A. Coutinho. Residual-based variational multiscale simulation of free surface flows. Comput Mech 46(4) (2010) DOI 10.1007/s00466-010-0495-z
P. Ryzhakov, R. Rossi, S. Idelsohn, E. Oñate. A monolithic Lagrangian approach for fluid–structure interaction problems. Comput Mech 46(6) (2010) DOI 10.1007/s00466-010-0522-0
E. Oñate, M. Celigueta, S. Idelsohn, F. Salazar, B. Suárez. Possibilities of the particle finite element method for fluid–soil–structure interaction problems. Comput Mech 48(3) (2011) DOI 10.1007/s00466-011-0617-2
A. Larese, R. Rossi, E. Oñate, S. Idelsohn. A coupled PFEM–Eulerian approach for the solution of porous FSI problems. Comput Mech 50(6) (2012) DOI 10.1007/s00466-012-0768-9
E. Oñate, A. Franci, J. Carbonell. A particle finite element method for analysis of industrial forming processes. Comput Mech 54(1) (2014) DOI 10.1007/s00466-014-1016-2