Revision as of 13:25, 1 July 2024

Abstract

The purpose of this study is to estimate the material constants of woods as an anisotropic material, by indentation tests using an ellipsoid indenter. Firstly, uniaxial compression tests are performed to investigate anisotropic modulus. Secondary, indentation tests are conducted to get load-displacement curve by rotating the non-axisymmetric indenter along the indentation axis. Finally, the orthotropic elastic parameters are estimated by comparing the indentation test results and finite element analysis results. The modulus along longitudinal direction, which is given by the present indentation method, are in good agreement with the measured modulus by the compression test. Therefore, it is confirmed that the longitudinal modulus can be measured by using the present method with the non-axisymmetric indenter