(Created page with "== Abstract == This paper describes the Fatigue & Damage Tolerance Phase for the S19.1 Full Component Test of the A350 XWB Aircraft.   The aim of this test was...")
 
m (Scipediacontent moved page Draft Content 821098644 to Gudiel et al 2018a)
(No difference)

Revision as of 19:35, 31 March 2022

Abstract

This paper describes the Fatigue & Damage Tolerance Phase for the S19.1 Full Component Test of the A350 XWB Aircraft.   The aim of this test was to demonstrate that the fatigue phenomena does not occurs, as well as no crack growing on composite materials. A350XWB S19.1 Full Scale test is the first test developed on a S19.1 aircraft section, therefore, the process to carry out the test constitute an important step for the development of experimental models which allow for the better understanding of this kind of aircraft component. The process carried out to obtain relevant data for the CFRP F&DT test is described in this paper:

Checking point of the structure selection. Specimen instrumentation. Spectra generation. Whiffletrees selection for structure load application. Load optimization for interfaces correlation.  

The FCT results shown that the fatigue and damage tolerance Certification requirements are fulfilled. 

Full document

The PDF file did not load properly or your web browser does not support viewing PDF files. Download directly to your device: Download PDF document
Back to Top
GET PDF

Document information

Published on 14/10/18
Accepted on 14/10/18
Submitted on 14/10/18

Volume 02 - Comunicaciones Matcomp17 (2018), Issue Núm. 4 - Comportamiento en servicio de los materiales compuestos (2), 2018
DOI: 10.23967/r.matcomp.2018.10.019
Licence: Other

Document Score

0

Views 3
Recommendations 0

Share this document

Keywords

claim authorship

Are you one of the authors of this document?