(Created page with "== Abstract == Due to the increasing demands in environment regulations related to gases emissions, the automotive sector has gradually increased the plastic consumption in v...") |
m (Scipediacontent moved page Draft Content 263202606 to Iriarte et al 2018a) |
(No difference)
| |
Revision as of 16:42, 31 March 2022
Abstract
Due to the increasing demands in environment regulations related to gases emissions, the automotive sector has gradually increased the plastic consumption in vehicles.The objective is to introduce in the market structural components made in latest generation composite materials in a serial and competitive way with the functionality of the present metallic parts. In this work the redesign of two automotive metallic components that will be produced via thermoplastic RTM (Part II) is presented. This technology allows the manufacturing of high performance long fibre composite materials with shorter cycle times. Based on the specifications of the components and the actual metallic solutions performance a new concept of a brake pedal and a control arm consistent with the manufacturing via a RTM thermoplastic process is adressed. For the calculations of both components, carbon or glass fibre with poliamide matrix (APA6) based solutions are used.
Full document
Document information
Published on 29/04/18
Accepted on 29/04/18
Submitted on 29/04/18
Volume 02 - Comunicaciones Matcomp17 (2018), Issue Num. 2 - Aplicaciones y compuestos multifuncionales, 2018
DOI: 10.23967/r.matcomp.2018.04.003
Licence: Other
Share this document
Keywords
claim authorship
Are you one of the authors of this document?