m (Cinmemj moved page Draft Samper 673051769 to Samper et al 2018ag) |
|
(No difference)
| |
Revision as of 12:53, 12 December 2018
Published in Int. Journal for Numerical Methods in Engineering Vol. 47 (1-3), pp. 557-603, 2000
doi: 10.1002/(SICI)1097-0207(20000110/30)47:1/3<557::AID-NME784>3.0.CO;2-9
Abstract
The paper describes how the finite element method and the finite volume method can be successfully combined to derive two new families of thin plate and shell triangles with translational degrees of freedom as the only nodal variables. The simplest elements of the two families based on combining a linear interpolation of displacements with cell centred and cell vertex finite volume schemes are presented in detail. Examples of the good performance of the new rotation‐free plate and shell triangles are given.
Back to Top
Document information
Published on 01/01/2000
DOI: 10.1002/(SICI)1097-0207(20000110/30)47:1/3<557::AID-NME784>3.0.CO;2-9
Licence: CC BY-NC-SA license
Web of Science Core Collection® Times cited: 115
Crossref Cited-by Times cited: 101
OpenCitations.net Times cited: 60
OpenCitations.net - Citing documents:
- E. Oñate, F. Flores, J. Marcipar. Membrane Structures Formed by Low Pressure Inflatable Tubes. New Analysis Methods and Recent Constructions. DOI 10.1007/978-1-4020-6856-0_10
- A. REALI∗. AN ISO GEOMETRIC ANALYSIS APPROACH FOR THE STUDY OF STRUCTURAL VIBRATIONS. Journal of Earthquake Engineering 10(sup001) (2008) DOI 10.1080/13632460609350626
- A. Agüero, F. Pallarés, E. Oñate. The Rotation-Free BST Shell Element for Linearized Buckling Analysis of Steel Structures. International Journal for Computational Methods in Engineering Science and Mechanics 7(3) (2007) DOI 10.1080/15502280600596646
- K. Larsson, M. Larson. Continuous piecewise linear finite elements for the Kirchhoff–Love plate equation. Numer. Math. 121(1) (2011) DOI 10.1007/s00211-011-0429-5
- K. Wang, S. Zhou, Z. Nie. Development of the Smoothed Natural Neighbor Petrov-Galerkin Method. AMM 201-202 (2012) DOI 10.4028/www.scientific.net/amm.201-202.198
- X. Cui, G. Wang, G. Li. A continuity re-relaxed thin shell formulation for static and dynamic analyses of linear problems. Arch Appl Mech 85(12) (2015) DOI 10.1007/s00419-015-1022-7
- K. KAMRAN, R. ROSSI, E. OÑATE, S. IDELSOHN. A COMPRESSIBLE LAGRANGIAN FRAMEWORK FOR MODELING THE FLUID–STRUCTURE INTERACTION IN THE UNDERWATER IMPLOSION OF AN ALUMINUM CYLINDER. Math. Models Methods Appl. Sci. 23(02) (2013) DOI 10.1142/s021820251340006x
- A. ERIKSSON, S. FAROUGHI. QUASI-STATIC INFLATION SIMULATIONS BASED ON CO-ROTATIONAL TRIANGULAR SPACE MEMBRANE ELEMENTS. Int. J. Str. Stab. Dyn. 13(03) (2013) DOI 10.1142/s0219455412500678
- K. Sze, Y. Zhou. An Efficient Rotation-free Triangle for Drape/Cloth Simulations — Part I: Model Improvement, Dynamic Simulation and Adaptive Remeshing. Int. J. Comput. Methods 13(03) (2016) DOI 10.1142/s0219876216500213
- P. Boisse. Composite Fiber Reinforcement Forming. (2011) DOI 10.1002/9781118097298.weoc037
- H. Stolarski, A. Gilmanov, F. Sotiropoulos. Nonlinear rotation-free three-node shell finite element formulation. Int. J. Numer. Meth. Engng 95(9) (2013) DOI 10.1002/nme.4517
- G. Wang, X. Cui, G. Li. A rotation-free shell formulation using nodal integration for static and dynamic analyses of structures. Int. J. Numer. Meth. Engng 105(7) (2015) DOI 10.1002/nme.4989
- Y. Cai, H. Zhu. A locking-free nine-DOF triangular plate element with incompatible approximation. Int. J. Numer. Meth. Engng 109(7) (2016) DOI 10.1002/nme.5307
- J. Choi, B. Lee. Rotation-free triangular shell element using node-based smoothed finite element method. Int J Numer Methods Eng 116(6) (2018) DOI 10.1002/nme.5928
- A. Gherissi, F. Abbassi, A. Ammar, A. Zghal. Numerical and Experimental Investigations on Deep Drawing of G1151 Carbon Fiber Woven Composites. Appl Compos Mater 23(3) (2015) DOI 10.1007/s10443-015-9468-x
- S. Mathieu, N. Hamila, F. Dupé, C. Descamps, P. Boisse. Stability of 3D Textile Composite Reinforcement Simulations: Solutions to Spurious Transverse Modes. Appl Compos Mater 23(4) (2016) DOI 10.1007/s10443-016-9483-6
- P. Boisse, R. Bai, J. Colmars, N. Hamila, B. Liang, A. Madeo. The Need to Use Generalized Continuum Mechanics to Model 3D Textile Composite Forming. Appl Compos Mater 25(4) (2018) DOI 10.1007/s10443-018-9719-8
- F. Flores, E. Oñate. A basic thin shell triangle with only translational DOFs for large strain plasticity. Int. J. Numer. Meth. Engng. 51(1) DOI 10.1002/nme.147
- M. Brunet, F. Sabourin. Analysis of a rotation-free 4-node shell element. Int. J. Numer. Meth. Engng 66(9) DOI 10.1002/nme.1608
- F. Flores, E. Oñate. A rotation-free shell triangle for the analysis of kinked and branching shells. Int. J. Numer. Meth. Engng 69(7) (2007) DOI 10.1002/nme.1823
- J. Battini. A rotation‐free corotational plane beam element for non‐linear analyses. Int. J. Numer. Meth. Engng 75(6) DOI 10.1002/nme.2267
- X. Liu, K. Sze. A corotational interpolatory model for fabric drape simulation. Int. J. Numer. Meth. Engng 77(6) DOI 10.1002/nme.2434
- N. Hamila, P. Boisse, F. Sabourin, M. Brunet. A semi-discrete shell finite element for textile composite reinforcement forming simulation. Int. J. Numer. Meth. Engng 79(12) DOI 10.1002/nme.2625
- E. Oñate, F. Zárate. Extended rotation-free plate and beam elements with shear deformation effects. Int. J. Numer. Meth. Engng DOI 10.1002/nme.2836
- X. Cui, G. Liu, G. Li, G. Zhang. A thin plate formulation without rotation DOFs based on the radial point interpolation method and triangular cells. Int. J. Numer. Meth. Engng. 85(8) (2010) DOI 10.1002/nme.3000
- Y. Zhou, K. Sze. A geometric nonlinear rotation-free triangle and its application to drape simulation. Int. J. Numer. Meth. Engng 89(4) (2011) DOI 10.1002/nme.3250
- I. Glavinić, H. Smoljanović, M. Galić, A. Munjiza, A. Mihanović. Computational aspects of the combined finite-discrete element method in static and dynamic analysis of shell structures. Materialwiss. Werkstofftech. 49(5) (2018) DOI 10.1002/mawe.201700276
- R. van Rijswick, A. Talmon, C. van Rhee. Fluid structure interaction (FSI) in piston diaphragm pumps. Can. J. Chem. Eng. 94(6) (2016) DOI 10.1002/cjce.22487
- J. Mackerle. Finite element linear and nonlinear, static and dynamic analysis of structural elements, an addendum. Engineering Computations 19(5) DOI 10.1108/02644400210435843
- E. Oñate, P. Cendoya, J. Miquel. Non‐linear explicit dynamic analysis of shells using the BST rotation‐free triangle. Engineering Computations 19(6) DOI 10.1108/02644400210439119
- F. Sabourin, M. Brunet. Detailed formulation of the rotation‐free triangular element “S3” for general purpose shell analysis. Engineering Computations 23(5) DOI 10.1108/02644400610671090
- F. Sabourin, J. Carbonniere, M. Brunet. A new quadrilateral shell element using 16 degrees of freedom. Engineering Computations 26(5) DOI 10.1108/02644400910970176
- Y. Bazilevs, M. Hsu, I. Akkerman, D. Benson. Enabling Computational Methods for Offshore Wind Turbines. DOI 10.1007/978-94-007-6143-8_6
- P. Boisse, N. Hamila, A. Madeo. Analysis of Defect Developments in Composite Forming. (2016) DOI 10.1007/978-3-319-46120-5_12
- P. Wang, N. Hamila, P. Boisse. Prédiction par simulation des défauts de plissement lors de la mise en forme des matériaux composites mono et multiplis. Matériaux & Techniques 100(6-7) (2012) DOI 10.1051/mattech/2012016
- R. Kramer, F. Cirak, C. Pantano. Fluid–Structure Interaction Simulations of a Tension-Cone Inflatable Aerodynamic Decelerator. AIAA Journal 51(7) DOI 10.2514/1.j051939
- E. Gal, R. Levy. Geometrically nonlinear analysis of shell structures using a flat triangular shell finite element. ARCO 13(3) DOI 10.1007/bf02736397
- F. Zárate, E. Oñate. A simple FEM–DEM technique for fracture prediction in materials and structures. Comp. Part. Mech. 2(3) (2015) DOI 10.1007/s40571-015-0067-2
- I. Uzelac, H. Smoljanovic, M. Batinic, B. Peroš, A. Munjiza. A model for thin shells in the combined finite-discrete element method. Engineering Computations 35(1) DOI 10.1108/ec-09-2016-0338
- O. Soto, J. Baum, F. Togashi, R. Löhner, R. Frank, A. Amini. The simulation of dust effects from fragmenting charges. Int Jnl of Num Meth for HFF 26(3/4) DOI 10.1108/hff-12-2015-0517
- T. Bao Le, A. Gilmanov, F. Sotiropoulos. High Resolution Simulation of Tri-Leaflet Aortic Heart Valve in an Idealized Aorta. 7(3) (2013) DOI 10.1115/1.4024520
- E. Oñate, F. Flores, L. Neamtu. Enhanced Rotation-Free Basic Shell Triangle. Applications to Sheet Metal Forming. DOI 10.1007/978-1-4020-6577-4_14
- P. Boisse. Simulation of Continuous Fibre Composite Forming. (2019) DOI 10.1007/978-3-030-23846-9_4
- N. Hamila, P. Boisse, S. Chatel. Semi-discrete shell finite elements for textile composite forming simulation. Int J Mater Form 2(S1) (2009) DOI 10.1007/s12289-009-0518-5
- P. Boisse, Y. Aimène, A. Dogui, S. Dridi, S. Gatouillat, N. Hamila, M. Aurangzeb Khan, T. Mabrouki, F. Morestin, E. Vidal-Sallé. Hypoelastic, hyperelastic, discrete and semi-discrete approaches for textile composite reinforcement forming. Int J Mater Form 3(S2) (2009) DOI 10.1007/s12289-009-0664-9
- N. Nodargi, P. Bisegna, F. Caselli. Effective computational modeling of erythrocyte electro-deformation. Meccanica 52(3) (2016) DOI 10.1007/s11012-016-0424-0
- P. Boisse, N. Hamila, A. Madeo. Modelling the development of defects during composite reinforcements and prepreg forming. Phil. Trans. R. Soc. A 374(2071) (2016) DOI 10.1098/rsta.2015.0269
- J. Arteaga-Gomez, R. Lohner, R. Aubry, J. Rojek, E. Onate. SIMPACT-FEFLO Coupling: Recent Advances. (2012) DOI 10.2514/6.2008-676
- H. Coda, R. Paccola. Unconstrained Finite Element for Geometrical Nonlinear Dynamics of Shells. Mathematical Problems in Engineering 2009 DOI 10.1155/2009/575131
- H. Nguyen-Xuan, C. Thai, J. Bleyer, P. Nguyen. Upper bound limit analysis of plates using a rotation-free isogeometric approach. Asia Pac. J. Comput. Engin. 1(1) (2014) DOI 10.1186/s40540-014-0012-5
- H. Ulmer, M. Hofacker, C. Miehe. Phase Field Modeling of Fracture in Plates and Shells. Proc. Appl. Math. Mech. 12(1) (2012) DOI 10.1002/pamm.201210076
- F. Flores, E. Oñate. Applications of a Rotation-Free Triangular Element for Finite Strain Analysis of Thin Shells and Membranes. DOI 10.1007/1-4020-3317-6_5
- K. Kheradmandia, M. Azhari, M. Bradford. Local Instability and Free Vibration of Supported Plates Using the Basic Plate Triangle. Comput Mech 40(1) (2006) DOI 10.1007/s00466-006-0085-2
- J. Valdés, E. Oñate. Orthotropic rotation-free basic thin shell triangle. Comput Mech 44(3) (2009) DOI 10.1007/s00466-009-0370-y
- G. Zheng, X. Cui, G. Li, S. Wu. An edge-based smoothed triangle element for non-linear explicit dynamic analysis of shells. Comput Mech 48(1) (2011) DOI 10.1007/s00466-011-0582-9
- F. Zárate, E. Oñate. Extended rotation-free shell triangles with transverse shear deformation effects. Comput Mech 49(4) (2011) DOI 10.1007/s00466-011-0653-y
- M. Hsu, Y. Bazilevs. Fluid–structure interaction modeling of wind turbines: simulating the full machine. Comput Mech 50(6) (2012) DOI 10.1007/s00466-012-0772-0
- K. Kamran, R. Rossi, E. Oñate. A contact algorithm for shell problems via Delaunay-based meshing of the contact domain. Comput Mech 52(1) (2012) DOI 10.1007/s00466-012-0791-x
- C. Long, A. Marsden, Y. Bazilevs. Fluid–structure interaction simulation of pulsatile ventricular assist devices. Comput Mech 52(5) (2013) DOI 10.1007/s00466-013-0858-3
- G. Munglani, R. Vetter, F. Wittel, H. Herrmann. Orthotropic rotation-free thin shell elements. Comput Mech 56(5) (2015) DOI 10.1007/s00466-015-1202-x
Share this document
Keywords
claim authorship
Are you one of the authors of this document?