Latest revision as of 11:48, 21 June 2024

Abstract

The pressuremeter measures both the pressuremeter modulus and the limit pressure, which are used to estimate the bearing capacity of the foundation according to different standards. The results of the pressuremeter test include the pLM limit pressure and the EM pressuremeter modulus. These quantities cannot be directly input as data for geotechnical calculations using Finite Elements or Finite Differences in the study of civil engineering structures such as retaining walls, tunnels, embankments, and excavations. These modern calculation methods require, at a minimum, knowledge of the mechanical characteristics of the soil, including elasticity (with Young’s modulus (E) and the Poisson ratio ()) and resistance (with cohesion (c’) and the angle of friction (’)). This study is devoted to the interpretation of the pressuremeter test so that it is possible to use it for the determination of the mechanical characteristics of the soil. When the pressuremeter test is carried out into clay, it appears pore pressure during the test when only shearing is applied. In summary, understanding pore pressure and interpreting measurements to determine the effective shear modulus are crucial for geotechnical engineering and subsurface exploration. Effective shear modulus can differ significantly from the value determined solely based on total pressure. This study provides the theoretical value of the Skempton coefficient B. Additionally, it proposes an interpretation theory for the pressuremeter test in clay. Finally, the theory is validated through a comparison with tests performed in London clay at a depth of 20.6 meters.

Full Paper