| Line 3: | Line 3: | ||
The process of laser beam welding is simulated using the Weakly-Compressible Smoothed Particle Hydrodynamics (WCSPH) and the Incompressible SPH (ISPH) methods. The presented models consider significant physical effects such as heat conduction, temperature-dependent surface tension with wetting, the phase transitions melting and solidification, and an evaporation-induced recoil pressure. Here, particular emphasis is placed on the modeling differences between the WCSPH and ISPH methods. Then, both methods are evaluated in terms of their accuracy and performance in the simulation of deep penetration laser beam welding with oscillating laser power. | The process of laser beam welding is simulated using the Weakly-Compressible Smoothed Particle Hydrodynamics (WCSPH) and the Incompressible SPH (ISPH) methods. The presented models consider significant physical effects such as heat conduction, temperature-dependent surface tension with wetting, the phase transitions melting and solidification, and an evaporation-induced recoil pressure. Here, particular emphasis is placed on the modeling differences between the WCSPH and ISPH methods. Then, both methods are evaluated in terms of their accuracy and performance in the simulation of deep penetration laser beam welding with oscillating laser power. | ||
| + | |||
| + | == Full Paper == | ||
| + | <pdf>Media:Draft_Sanchez Pinedo_170725132pap_49.pdf</pdf> | ||
Revision as of 10:57, 23 November 2023
Abstract
The process of laser beam welding is simulated using the Weakly-Compressible Smoothed Particle Hydrodynamics (WCSPH) and the Incompressible SPH (ISPH) methods. The presented models consider significant physical effects such as heat conduction, temperature-dependent surface tension with wetting, the phase transitions melting and solidification, and an evaporation-induced recoil pressure. Here, particular emphasis is placed on the modeling differences between the WCSPH and ISPH methods. Then, both methods are evaluated in terms of their accuracy and performance in the simulation of deep penetration laser beam welding with oscillating laser power.
Full Paper
Document information
Published on 23/11/23
Submitted on 23/11/23
Volume Computational Modeling of Manufacturing Processes Using Particle and Meshless Methods, 2023
DOI: 10.23967/c.particles.2023.011
Licence: CC BY-NC-SA license
Share this document
Keywords
claim authorship
Are you one of the authors of this document?