Latest revision as of 12:25, 3 October 2023

Abstract

The development of the cement industry consumes piles of natural resources and generating huge amount of waste and causing serious pollution, which can be partially solved by replacing with other cementitious materials, in particularly, solid waste. Reclaimed concrete slurry waste (RCSW), a corrosive and hazardous the residues from the reclaimed system for retrieving the aggregates from the returned concrete or cleaning the concrete mixer and trucks in the ready-mixed concrete plant, could that cannot be used to manufacture reclaimed concrete. However, the pre-hydration limits the hydraulic property of RCSW, which requires the proper treatment. This paper investigated the effect of three different treatment methods in improving the performance of RCSW and its feasibility of replacing cement under different substitution ratio in manufacturing reclaimed concrete. The treatment included sieving, shearing and ball-milling, and the substitution ratio was set as 15%, 30% and 45%, respectively. In addition to compressive strength and hydration properties, the environment impact of the cement paste replaced with RCSW were investigated as well. The results showed that compared within three methods, the shearing and ball-milling generated the treated RCSW with smaller particle size and high roundness. For the RCSW substituted cement paste, the substitution with 15% of treated RCSW provided the highest strength, meanwhile, while at a higher substitution ratio significantly reduced the compressive strength. The 15% of ball milling treated RCSW produced more products during the hydration process, resulting in a denser structure. According to the economic and environmental calculations, RCSW substitution reduced CO2 emissions, in which, the ball-milling method showed a lower carbon footprint.

Full Paper