m (Scipediacontent moved page Draft Content 863172533 to Lins Franke 2022a) |
|||
| Line 2: | Line 2: | ||
== Abstract == | == Abstract == | ||
| − | + | The end-grain bonding of timber components with the Timber Structures 3.0 technology (TS3) is an emerging construction method in timber engineering. For onsite applications at low ambient temperatures down to 0 °C, it is being investigated numerically and experimentally if it’s possible to heat the butt-joint to above 17 °C during the curing process using a heating wire. The current research results show that this is basically possible. | |
Revision as of 09:03, 7 July 2022
Abstract
The end-grain bonding of timber components with the Timber Structures 3.0 technology (TS3) is an emerging construction method in timber engineering. For onsite applications at low ambient temperatures down to 0 °C, it is being investigated numerically and experimentally if it’s possible to heat the butt-joint to above 17 °C during the curing process using a heating wire. The current research results show that this is basically possible.
Document
Back to Top
GET PDF
Document information
Published on 05/07/22
Submitted on 05/07/22
Volume 1600 Geomechanics and Natural Materials, 2022
DOI: 10.23967/wccm-apcom.2022.104
Licence: CC BY-NC-SA license
Share this document
Keywords
claim authorship
Are you one of the authors of this document?