m (Scipediacontent moved page Draft Content 836928489 to Suwa Yusa 2022a) |
|||
Line 5: | Line 5: | ||
== Video == | == Video == | ||
{{#evt:service=cloudfront|id=277611|alignment=center|filename=645.mp4}} | {{#evt:service=cloudfront|id=277611|alignment=center|filename=645.mp4}} | ||
− | + | ||
− | == | + | == Abstract == |
+ | <pdf>Media:Suwa_Yusa_2022a_7155_645_abstract.pdf</pdf> | ||
+ | |||
+ | == Full paper == | ||
<pdf>Media:Draft_Content_836928489645_paper.pdf</pdf> | <pdf>Media:Draft_Content_836928489645_paper.pdf</pdf> |
Operators of V-bending process have sometimes been injured because of broken piece of a die. To prevent this accident, a structure of the die that is tough to break is required. According to the previous study, introducing a hole in the V-bending die reduced stresses at the bottom of V-groove. Therefore, parametric study of a hole in a structure is necessary to find an appropriate design of the structure. However, parametric study of a structure with a hole using conventional FEM has difficulty in remeshing. Using coupling-matrix-free iterative s-version FEM, a mesh of the whole analysis domain and a mesh in the vicinity of the hole can be created separately as a global mesh and a local mesh, respectively. In this study, we proposed a parametric analysis system to analyze the die with a hole for V-bending process, and we evaluated the results in terms of fracture mechanics.
Published on 28/02/22
Accepted on 28/02/22
Submitted on 28/02/22
Volume IS02 - Applications of Computational Methods to Product and Process Design for Industry, 2022
DOI: 10.23967/complas.2021.033
Licence: CC BY-NC-SA license
Are you one of the authors of this document?