m (Scipediacontent moved page Draft Content 514576381 to Kutis et al 2022a) |
|||
| Line 5: | Line 5: | ||
== Video == | == Video == | ||
{{#evt:service=cloudfront|id=277572|alignment=center|filename=770.mp4}} | {{#evt:service=cloudfront|id=277572|alignment=center|filename=770.mp4}} | ||
| − | + | ||
| − | == | + | == Abstract == |
| + | <pdf>Media:Kutis_et_al_2022a_3052_770_abstract.pdf</pdf> | ||
| + | |||
| + | == Full paper == | ||
<pdf>Media:Draft_Content_514576381770_paper.pdf</pdf> | <pdf>Media:Draft_Content_514576381770_paper.pdf</pdf> | ||
Latest revision as of 14:18, 28 February 2022
Abstract
This paper deals with the development of the FEM model of piezoelectric beam elements, where the piezoelectric layers are located on the outer surface of the beam core, which is made of functionally graded material. Subsequently, the FEM model created in this way is reduced by the so-called exact method, which is one of the MOR methods. Next MOR FEM equations are transformed into a state space model. Created state space model is connected to LQR controller and the reduced system is analysed. Developed FEM model, MOR technique, state space model and LQR control are implemented in FEM code MultiFEM.
Video
Abstract
Full paper
Document information
Published on 28/02/22
Accepted on 28/02/22
Submitted on 28/02/22
Volume IS22 - Plasticity Modelling, Parameter Identification and Applications to Forming Operations, 2022
DOI: 10.23967/complas.2021.047
Licence: CC BY-NC-SA license
Share this document
Keywords
claim authorship
Are you one of the authors of this document?