m (Scipediacontent moved page Draft Content 884538595 to Kawagoshi et al 2022a) |
|||
Line 5: | Line 5: | ||
== Video == | == Video == | ||
{{#evt:service=cloudfront|id=277506|alignment=center|filename=426.mp4}} | {{#evt:service=cloudfront|id=277506|alignment=center|filename=426.mp4}} | ||
− | + | ||
− | == | + | == Abstract == |
+ | <pdf>Media:Kawagoshi_et_al_2022a_6844_426_abstract.pdf</pdf> | ||
+ | |||
+ | == Full paper == | ||
<pdf>Media:Draft_Content_884538595426_paper.pdf</pdf> | <pdf>Media:Draft_Content_884538595426_paper.pdf</pdf> |
Steel tubes with differential wall thickness are required to reduce the weight of automobiles. One of the forming processes of steel tubes with differential thickness is the ironing of the inner surface[1]. In the first process, the end of the steel tube is expanded. In the second process, the punch is pushed in and the inner surface of the steel tube is ironed. As a result, the steel tube with a wall thickness difference of 50% can be formed. In this report, the behaviour of the steel tube during forming and the possible forming condition were clarified using FEM (Finite Element Method) analysis. Abaqus/Explicit was used for FEM analysis, and analysis was performed using an axisymmetric model. As a result of the analysis, it was found that the friction coefficient difference Δμ needs more than the threshold in order to form the steel tube with differential thickness. If Δμ is larger than the threshold, the steel tube is fixed at the expansion part, and the steel tube with differential thickness can be formed. On the other hand, if Δμ is smaller than the threshold, the expansion part is slipping during forming and the steel tube with differential thickness cannot be formed. This result suggests that the effect of the friction coefficient can be evaluated quantitatively using FEM analysis.
Published on 28/02/22
Accepted on 28/02/22
Submitted on 28/02/22
Volume CT13 - Forming Processes, 2022
DOI: 10.23967/complas.2021.052
Licence: CC BY-NC-SA license
Are you one of the authors of this document?