Line 7: | Line 7: | ||
== Full document == | == Full document == | ||
− | <pdf>Media:Egea_et_al_2018a- | + | <pdf>Media:Egea_et_al_2018a-beopen2106-3847-document.pdf</pdf> |
This paper reflects the work done to design a torque control strategy for an axial flux switched reluctance machine. The general electrical model is first presented but as the switched reluctance machine behaves nonlinearly1 a (three-dimensional) finite element method characterization is performed, so the nonlinearity may be considered. Once the machine is characterized in FEM a Simulink model is developed where a torque control strategy is proposed. Then, both the machine and the control are experimentally tested. The control setting, and the obtained real performance results are also presented in this document. Finally, the most outstanding conclusions about the control strategy are captured. Main difficulties encountered during the implementation of the control strategy are also collected.
Document type: Conference object
The URL or file path given does not exist.
The different versions of the original document can be found in:
Published on 01/01/2018
Volume 2018, 2018
DOI: 10.1109/icelmach.2016.7732679
Licence: Other
Are you one of the authors of this document?