m (Cinmemj moved page Draft Samper 774749604 to Munoz et al 2003a) |
|
(No difference)
| |
Latest revision as of 13:57, 23 June 2020
Abstract
The analysis of multibody systems requires an exact description of the kinematics of the joints involved. In the present work the master–slave approach is employed and endowed with the possibility of including several more complex types of joints. We present the formulation for joints where some relation between the different released degrees of freedom exists such as the screw joint, the rack‐and‐pinion joint or the cam joint. These joints are implemented in conjunction with geometrically exact beams and an energy‐momentum conserving time‐stepping algorithm.
Abstract
Back to Top
Document information
Published on 01/01/2003
DOI: 10.1002/cnm.627
Licence: CC BY-NC-SA license
Share this document
claim authorship
Are you one of the authors of this document?