m (Cinmemj moved page Draft Samper 853029776 to Cruchaga et al 1995a) |
|||
| Line 4: | Line 4: | ||
A fixed‐mesh method for the analysis of transient forming processes is presented. The mesh covers material regions and zones through which the material may flow. These last zones are identified by a pseudomaterial with relatively small physical parameters. During time processing, the interface between both materials is followed by an arbitrary Lagrangian mesh. This technique appears to be suitable for the treatment of moving surfaces with sharp corners. A particular boundary condition for the Navier‐Stokes equations is also introduced in order to model a porous wall. | A fixed‐mesh method for the analysis of transient forming processes is presented. The mesh covers material regions and zones through which the material may flow. These last zones are identified by a pseudomaterial with relatively small physical parameters. During time processing, the interface between both materials is followed by an arbitrary Lagrangian mesh. This technique appears to be suitable for the treatment of moving surfaces with sharp corners. A particular boundary condition for the Navier‐Stokes equations is also introduced in order to model a porous wall. | ||
| + | |||
| + | <pdf>Media:Cruchaga_et_al_1995a_6262_CruOnIdel1995.pdf</pdf> | ||
Latest revision as of 12:14, 12 April 2019
Published in Communications in Numerical Methods in Engineering Vol. 11 (2), pp. 137-148, 1995
doi: 10.1002/cnm.1640110207
Abstract
A fixed‐mesh method for the analysis of transient forming processes is presented. The mesh covers material regions and zones through which the material may flow. These last zones are identified by a pseudomaterial with relatively small physical parameters. During time processing, the interface between both materials is followed by an arbitrary Lagrangian mesh. This technique appears to be suitable for the treatment of moving surfaces with sharp corners. A particular boundary condition for the Navier‐Stokes equations is also introduced in order to model a porous wall.
Document information
Published on 01/01/1995
DOI: 10.1002/cnm.1640110207
Licence: CC BY-NC-SA license
