m (Cinmemj moved page Draft Samper 586124296 to Zienkiewicz et al 1978a) |
|||
| Line 6: | Line 6: | ||
Details of application to some examples of steady state flow in extrusion, drawing and rolling are given and transient free surface solutions are demonstrated for stretch forming and deep drawing. The formulation is shown to be capable of dealing with boundary friction and strain hardening. The coupling with thermal effects is demonstrated in the last section of the paper, and in addition, some practical problems of elastic spring-back which occur on the removal of load are discussed. | Details of application to some examples of steady state flow in extrusion, drawing and rolling are given and transient free surface solutions are demonstrated for stretch forming and deep drawing. The formulation is shown to be capable of dealing with boundary friction and strain hardening. The coupling with thermal effects is demonstrated in the last section of the paper, and in addition, some practical problems of elastic spring-back which occur on the removal of load are discussed. | ||
| + | |||
| + | <pdf>Media:Zienkiewicz_et_al_1978a_2655_ZiJaOn1978.pdf</pdf> | ||
Latest revision as of 12:08, 26 March 2019
Published in Int. Journal of Solids and Structures Vol. 14 (1), pp. 15-38, 1978
doi: 10.1016/0020-7683(78)90062-8
Abstract
In the extrusion and forming of solids the plastic (or viscoplastic) deformations are so large that the elastic strain is negligible. The problem thus becomes one of incompressible viscous, non-Newtonian flow with prescribed boundary velocities. Various formulations of such problems (analogous to those of incompressible solid mechanics) are possible, and the paper investigates two basic processes.
Details of application to some examples of steady state flow in extrusion, drawing and rolling are given and transient free surface solutions are demonstrated for stretch forming and deep drawing. The formulation is shown to be capable of dealing with boundary friction and strain hardening. The coupling with thermal effects is demonstrated in the last section of the paper, and in addition, some practical problems of elastic spring-back which occur on the removal of load are discussed.
Back to Top
Document information
Published on 01/01/1978
DOI: 10.1016/0020-7683(78)90062-8
Licence: CC BY-NC-SA license
Web of Science Core Collection® Times cited: 203
Crossref Cited-by Times cited: 242
OpenCitations.net Times cited: 120
OpenCitations.net - Citing documents:
- T. Angelov. Modelling and Solvability of a Rigid-Plastic Rolling Problem. Mathematics and Mechanics of Solids 15(6) (2009) DOI 10.1177/1081286509105148
- I. Haque, J. Jackson, T. Gangjee, A. Raikar. Empirical and finite element approaches to forging die design: A state-of-the-art survey. J. Materials Shaping Technology 5(1) DOI 10.1007/bf02833683
- S. Kobayashi. A review on the finite-element method and metal forming process modeling. J. Applied Metalworking 2(3) DOI 10.1007/bf02834034
- H. Lee, R. Rao. A finite element solution of Steckel rolling using measured velocity boundary conditions. J. Mater. Shaping Technol. 7(3) DOI 10.1007/bf02834745
- S. Ghosh. Finite element simulation of some extrusion processes using the arbitrary Lagrangian-Eulerian description. J. Mater. Shaping Technol. 8(1) DOI 10.1007/bf02834793
- I. Alfaro, D. González, D. Bel, E. Cueto, M. Doblaré, F. Chinesta. Recent advances in the meshless simulation of aluminium extrusion and other related forming processes. Arch Computat Methods Eng 13(1) DOI 10.1007/bf02905930
- E. Cueto, F. Chinesta. Meshless methods for the simulation of material forming. Int J Mater Form 8(1) (2013) DOI 10.1007/s12289-013-1142-y
- E. Dvorkin, M. Cavaliere, M. Goldschmit. A three field element via Augmented Lagrangian for modelling bulk metal forming processes. Computational Mechanics 17(1-2) DOI 10.1007/bf00356474
- D. Balagangadhar, D. Tortorelli. Design of large-deformation steady elastoplastic manufacturing processes. Part I: a displacement-based reference frame formulation. Int. J. Numer. Meth. Engng. 49(7) (2000) DOI 10.1002/1097-0207(20001110)49:7<899::aid-nme983>3.0.co;2-m
- M. Manahan. A New Postirradiation Mechanical Behavior Test—The Miniaturized Disk Bend Test. Nuclear Technology 63(2) (2017) DOI 10.13182/nt83-a33289
- W. Schmidt, R. Naik. Finite Element Analysis Of The Extrusion Of Metals. International Journal of Modelling and Simulation 3(3) (2016) DOI 10.1080/02286203.1983.11759832
- S. Oh, N. Rebelo, S. Kobayashi. Finite-Element Formulation for the Analysis of Plastic Deformation of Rate-Sensitive Materials in Metal Forming. DOI 10.1007/978-3-642-81355-9_18
- C. Böer, N. Rebelo, H. Rydstad, G. Schröder. Mathematical Modelling. DOI 10.1007/978-3-642-82788-4_2
- K. Mattiasson, A. Melander. Numerical Simulation of Stretch Forming Processes. DOI 10.1007/978-3-642-82810-2_8
- E. Oñate, R. Lama. Possibilities of the finite element viscous shell approach for analysis of sheet metal forming problems. DOI 10.1007/978-3-642-82810-2_9
- M. Kleiber. On Solving Problems of Advanced Plastic Flow. DOI 10.1007/978-3-642-84833-9_31
- R. Jain, V. Jain. Finite element simulation of abrasive flow machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 217(12) (2005) DOI 10.1243/095440503772680640
- S. Domanti, D. McElwain. Cold rolling of flat metal products: Contribution of mathematical modelling. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 212(1) (2016) DOI 10.1243/0954405981515518
- P. Joyot, R. Rakotomalala, O. Pantalé, M. Touratier, N. Hakem. A numerical simulation of steady state metal cutting. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 212(5) (2005) DOI 10.1243/0954406981521268
- R. Frick, Y. Chen. Analysis of forming rate sensitive materials. Acta Mechanica 74(1-4) DOI 10.1007/bf01194349
- D. Balagangadhar, D. Tortorelli. Design and analysis of large deformation continuous elastoplastic manufacturing processes via a steady displacement-based formulation. (2012) DOI 10.2514/6.1998-4893
- A. Perrot, C. Lanos, P. Estellé, Y. Melinge. Ram extrusion force for a frictional plastic material: model prediction and application to cement paste. Rheol Acta 45(4) (2006) DOI 10.1007/s00397-005-0074-y
- A. Perrot, Y. Mélinge, D. Rangeard, F. Micaelli, P. Estellé, C. Lanos. Use of ram extruder as a combined rheo-tribometer to study the behaviour of high yield stress fluids at low strain rate. Rheol Acta 51(8) (2012) DOI 10.1007/s00397-012-0638-6
- J. Noh, M. Kim, B. Hwang. Stress profiles at contact surface in ring compression test. J Mech Sci Technol 24(8) (2010) DOI 10.1007/s12206-010-0513-2
- M. Joun. Iterative and non-iterative schemes for Coulomb frictional law in metal forming simulation and their numerical characteristics. Commun. Numer. Meth. Engng. 15(7) DOI 10.1002/(sici)1099-0887(199907)15:7<515::aid-cnm266>3.0.co;2-a
- T. Sheppard. Temperature changes occurring during extrusion of metals: comparison of bulk, numerical, and integral profile predictions with experimental data. Materials Science and Technology 15(4) (2013) DOI 10.1179/026708399101505941
- G. Yoshikawa, F. Miyasaka, Y. Hirata, Y. Katayama, T. Fuse. Development of numerical simulation model for FSW employing particle method. Science and Technology of Welding and Joining 17(4) (2013) DOI 10.1179/1362171811y.0000000099
- M. Iordachescu, D. Iordachescu, E. Scutelnicu, J. Ocaña. FEM model of butt cold welding. Science and Technology of Welding and Joining 12(5) (2013) DOI 10.1179/174329313x13789830157140
- C. Foli, M. Menezes, L. Filho. Finite Element Analysis of the Total Forming Force of Thin-Walled Metallic Tube Junctions Employing Elastomers. (2012) DOI 10.1007/978-3-642-22700-4_24
- S. Alexandrov, W. Miszuris. Heat generation in plane strain compression of a thin rigid plastic layer. Acta Mech 227(3) (2015) DOI 10.1007/s00707-015-1499-8
- A. Sakuma, T. Inoue. DESCRIPTION OF A THERMO-INELASTIC BODY WITH A MOVING SOLID/LIQUID INTERFACE AND SIMULATION OF THE WELDING PROCESS. Journal of Thermal Stresses 24(9) DOI 10.1080/014957301750379630
- S. Qamar, J. Chekotu, S. Qamar. Effect of Shape Complexity on Ram Pressure and Metal Flow in Aluminum Extrusion. JOM 71(12) (2019) DOI 10.1007/s11837-019-03748-6
- H. Serizawa, F. Miyasaka. Numerical Analysis of Inhomogeneous Behavior in Friction Stir Processing by Using a New Coupled Method of MPS And FEM. (2018) DOI 10.1002/9781119474746.ch10
- J. Brnic, M. Canadija, G. Turkalj. Finite Elastoplasticity in Plane Strain Cold Rolling Problem. DOI 10.1007/978-3-7091-2555-7_47
- J. Castro, B. Pereira, R. Souza, E. Oliveira, I. Ferreira. Numerical Study of Turbulent Flows and Heat Transfer in Coupled Industrial-Scale Tundish of a Continuous Casting Material in Steel Production. (2018) DOI 10.5772/intechopen.75935
- A. Galavís, D. González, I. Alfaro, E. Cueto. Improved boundary tracking in meshless simulations of free-surface flows. Comput Mech 42(3) (2008) DOI 10.1007/s00466-008-0263-5
- E. Oñate, M. Celigueta, S. Idelsohn, F. Salazar, B. Suárez. Possibilities of the particle finite element method for fluid–soil–structure interaction problems. Comput Mech 48(3) (2011) DOI 10.1007/s00466-011-0617-2
- E. Oñate, A. Franci, J. Carbonell. A particle finite element method for analysis of industrial forming processes. Comput Mech 54(1) (2014) DOI 10.1007/s00466-014-1016-2
- C. Sun, S. Hwang, C. Yun, J. Chung. Investigation of thermomechanical behavior of a work roll and of roll life in hot strip rolling. Metall and Mat Trans A 29(9) DOI 10.1007/s11661-998-0117-y
- H. Atharifar, D. Lin, R. Kovacevic. Numerical and Experimental Investigations on the Loads Carried by the Tool During Friction Stir Welding. J. of Materi Eng and Perform 18(4) (2009) DOI 10.1007/s11665-008-9298-1
- K. Lange, K. Roll, A. Tekkaya, T. Wanheim. Prozeßsimulation und- optimierung. DOI 10.1007/978-3-642-58047-5_13
- F. Salazar, J. Irazábal, A. Larese, E. Oñate. Numerical modelling of landslide-generated waves with the particle finite element method (PFEM) and a non-Newtonian flow model. Int. J. Numer. Anal. Meth. Geomech. 40(6) (2015) DOI 10.1002/nag.2428
- F. Du, G. Wang, X. Zang, X. Li. Friction Model for Strip Rolling. J. Iron Steel Res. Int. 17(7) (2010) DOI 10.1016/s1006-706x(10)60150-1
- D. Balagangadhar, D. Tortorelli. A Steady Displacement-Based Formulation for the Analysis and Design of Large Deformation Continuous Elastoplastic Manufacturing Processes. DOI 10.1007/978-94-011-4738-5_27
- K. MORI, K. OSAKADA. Finite Element Analysis of Nonsteady State Deformation in Flat Rolling. Tetsu-to-Hagane 67(15) DOI 10.2355/tetsutohagane1955.67.15_2337
- Y. TOMITA. Finite Element Methods for Analysis of Metal Forming Processes. Tetsu-to-Hagane 67(6) DOI 10.2355/tetsutohagane1955.67.6_710
- P. Hartley, C. Sturgess, C. Liu, G. Rowe. Experimental and theoretical studies of workpiece deformation, stress, and strain during flat rolling. International Materials Reviews 34(1) (2013) DOI 10.1179/imr.1989.34.1.19
- B. Soltani, K. Mattiasson, A. Samuelsson. Implicit solid, flow and flow-solid finite element approaches in blade forging simulation. Int. J. Numer. Meth. Engng. 56(13) (2003) DOI 10.1002/nme.628
- E. Dvorkin, R. Toscano. A new rigid-viscoplastic model for simulating thermal strain effects in metal-forming processes. Int. J. Numer. Meth. Engng. 58(12) (2003) DOI 10.1002/nme.833
- Y. Miyake, F. Miyasaka, S. Matsuzawa, S. Murao, K. Mitsufuji, S. Ogawa. Development of FSW Simulation Model-Effect of Tool Shape on Plastic Flow. (2015) DOI 10.1002/9781119093343.ch30
- I. Yarita, R. Mallett, E. Lee. Stress and deformation analysis of plane-strain rolling process. Steel Research 56(5) (2016) DOI 10.1002/srin.198500631
- A. Kumar, S. Jha, V. Ramaswamy, Y. Cheng, C. Vantyne, G. Krauss. Modelling the microstructural evolution during hot compression of low carbon steel. Steel Research 64(4) (2016) DOI 10.1002/srin.199301010
- D. Berazategui, M. Cavaliere, L. Montelatici, E. Dvorkin. On the modelling of complex 3D bulk metal forming processes via the pseudo-concentrations technique. Application to the simulation of the Mannesmann piercing process. Int. J. Numer. Meth. Engng 65(7) (2006) DOI 10.1002/nme.1475
- H. Dalayeli, H. Hashemolhosseini, M. Farzin, B. Soltani. Improvement of the flow formulation by recovery of the hydrostatic pressure using the finite point method. Int. J. Numer. Meth. Engng 65(9) DOI 10.1002/nme.1492
- J. Heinrich, O. Zienkiewicz. Quadratic finite element schemes for two-dimensional convective-transport problems. Int. J. Numer. Meth. Engng. 11(12) DOI 10.1002/nme.1620111207
- O. Zienkiewicz, E. Oñae, J. Heinrich. A general formulation for coupled thermal flow of metals using finite elements. Int. J. Numer. Meth. Engng. 17(10) DOI 10.1002/nme.1620171005
- A. Agrawal, P. Dawson. A comparison of Galerkin and streamline techniques for integrating strains from an Eulerian flow field. Int. J. Numer. Meth. Engng. 21(5) DOI 10.1002/nme.1620210507
- R. Houlston, G. Vickers, D. Anderson. A finite element and experimental study of rigid-plastic compression. Int. J. Numer. Meth. Engng. 23(8) DOI 10.1002/nme.1620230803
- E. Oñate, M. Kleiber, C. De Saracibar. Plastic and viscoplastic flow of void-containing metals. Applications to axisymmetric sheet forming problems. Int. J. Numer. Meth. Engng. 25(1) DOI 10.1002/nme.1620250118
- N. Chandra. Analysis of superplastic metal forming by a finite element method. Int. J. Numer. Meth. Engng. 26(9) DOI 10.1002/nme.1620260904
- M. Marques, P. Martins. Three-dimensional finite element contact algorithm for metal forming. Int. J. Numer. Meth. Engng. 30(7) DOI 10.1002/nme.1620300708
- E. Oñate, C. de Saracibar. Finite element analysis of sheet metal forming problems using a selective viscous bending/membrane formulation. Int. J. Numer. Meth. Engng. 30(8) DOI 10.1002/nme.1620300815
- M. Reddy, J. Reddy. Numerical simulation of forming processes using a coupled fluid flow and heat transfer model. Int. J. Numer. Meth. Engng. 35(4) DOI 10.1002/nme.1620350411
- Y. Hu, W. Liu. An ALE hydrodynamic lubrication finite element method with application to strip rolling. Int. J. Numer. Meth. Engng. 36(5) DOI 10.1002/nme.1620360509
- N. Kim, K. Choi, J. Chen. Die shape design optimization of sheet metal stamping process using meshfree method. Int. J. Numer. Meth. Engng. 51(12) DOI 10.1002/nme.181
- I. Alfaro, J. Yvonnet, F. Chinesta, E. Cueto. A study on the performance of natural neighbour-based Galerkin methods. Int. J. Numer. Meth. Engng 71(12) (2007) DOI 10.1002/nme.1993
- M. Cavaliere, M. Goldschmit, E. Dvorkin. Finite element simulation of the steel plates hot rolling process. Int. J. Numer. Meth. Engng. 52(12) DOI 10.1002/nme.262
- E. Oñate, R. Rossi, S. Idelsohn, K. Butler. Melting and spread of polymers in fire with the particle finite element method. Int. J. Numer. Meth. Engng DOI 10.1002/nme.2731
- H. Serizawa, F. Miyasaka. New Combined Method of mps and fem for Simulating Friction Stir Processing. (2015) DOI 10.1002/9781119211662.ch4
- M. Fadzil, K. Chuah, P. Hartley, C. Sturgess, G. Rowe. Metal-Forming Analysis on Desk-Top Microcomputers Using Non-Linear Elastic-Plastic Finite Element Techniques. DOI 10.1007/978-1-349-06281-2_66
- S. Kobayashi. Metal Forming and the Finite Element Method — Past and Future. DOI 10.1007/978-1-349-07529-4_2
- M. Kleiber, T. Hien, H. Antúnez, P. Kowalczyk. Parameter sensitivity of elastoplastic response. Engineering Computations 12(3) DOI 10.1108/02644409510799604
- J. Bonet. Recent developments in the incremental flow formulation for the numerical simulation of metal forming processes. Engineering Computations 15(3) DOI 10.1108/02644409810208507
- T. Angelov, A. Nedev. Numerical analysis of a hot‐strip rolling problem with Coulomb‐Siebel friction. Engineering Computations 15(8) DOI 10.1108/02644409810244101
- T. Angelov. Variational and numerical approach to a steady-state rolling problem. J Eng Math 66(4) (2009) DOI 10.1007/s10665-009-9284-0
- E. Moreno, M. Cervera. Elementos finitos mixtos estabilizados para flujos confinados de Bingham y de Herschel-Bulkley Parte II: soluciones numéricas. Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería 32(3) DOI 10.1016/j.rimni.2015.02.002
- E. Moreno, M. Cervera. Elementos finitos mixtos estabilizados para flujos confinados de Bingham y de Herschel-Bulkley. ParteI: Formulación. Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería 32(2) DOI 10.1016/j.rimni.2015.02.004
- J. CHANG, C. WENG. NUMERICAL MODELLING OF TWIN-ROLL CASTING BY THE COUPLED FLUID FLOW AND HEAT TRANSFER MODEL. Int. J. Numer. Meth. Engng. 40(3) DOI 10.1002/(sici)1097-0207(19970215)40:3<493::aid-nme76>3.0.co;2-l
- J. Bonet, P. Bhargava, R. Wood. Finite element analysis of the superplastic forming of thick sheet using the incremental flow formulation. Int. J. Numer. Meth. Engng. 40(17) DOI 10.1002/(sici)1097-0207(19970915)40:17<3205::aid-nme208>3.0.co;2-p
- J. Rodrigues, P. Martins. Coupled thermo-mechanical analysis of metal-forming processes through a combined finite element-boundary element approach. Int. J. Numer. Meth. Engng. 42(4) DOI 10.1002/(sici)1097-0207(19980630)42:4<631::aid-nme374>3.0.co;2-i
- P. Martins, M. Barata Marques. Upper bound analysis of plane strain rolling using a flow function and the weighted residuals method. Int. J. Numer. Meth. Engng. 44(11) DOI 10.1002/(sici)1097-0207(19990420)44:11<1671::aid-nme559>3.0.co;2-2
- T. Sheppard. Continuum principles. DOI 10.1007/978-1-4757-3001-2_2
- J. Chakrabarty. Axisymmetric and Related Problems. DOI 10.1007/978-1-4757-3268-9_3
- E. Roeder, W. Egel-Hess. Strangpressen anorganischer Glasschmelzen - Herstellung komplizierter Voll- und Hohlprofile hoher Formtreue und Maßgenauigkeit. DOI 10.1007/978-3-642-95606-5_55
- E. Oñate, C. de Saracibar. Finite Element Analysis Of Sheet Metal Forming Problems Using A Viscous Voided Shell Formulation. DOI 10.1007/978-94-009-1411-7_19
- J. Vilotte, R. Madariaga, M. Daignieres, O. Zienkiewicz. Numerical study of continental collision: influence of buoyancy forces and an initial stiff inclusion. Geophysical Journal International 84(2) DOI 10.1111/j.1365-246x.1986.tb04357.x
- A. Slużalec. An analysis of thermal effects of coupled thermo-plasticity in metal forming processes. Commun. appl. numer. methods 4(5) DOI 10.1002/cnm.1630040511
- A. Slużalec. An analysis of dead zones in the process of direct extrusion through single-hole flat die. Commun. Appl. Numer. Methods 7(4) DOI 10.1002/cnm.1630070405
- E. Dvorkin, M. Canga. Incompressible viscoplastic flow analysis using a quadrilateral 2-D element based on mixed interpolation of tensorial components. Commun. Numer. Meth. Engng. 9(2) (2005) DOI 10.1002/cnm.1640090209
- R. Rakotomalala, P. Joyot, M. Touratier. Arbitrary Lagrangian-Eulerian thermomechanical finite-element model of material cutting. Commun. Numer. Meth. Engng. 9(12) (2005) DOI 10.1002/cnm.1640091205
- M. Cruchaga, E. Oñate, S. Idelsohn. On the pseudomaterial approach for the analysis of transient forming processes. Commun. Numer. Meth. Engng. 11(2) (2005) DOI 10.1002/cnm.1640110207
- A. Franci. Industrial Application: PFEM Analysis Model of NPP Severe Accident. (2016) DOI 10.1007/978-3-319-45662-1_6
- J. Reddy, V. Padhye. A penalty finite element model for axisymmetric flows of non-Newtonian fluids. Numer. Methods Partial Differential Eq. 4(1) DOI 10.1002/num.1690040104
- E. Oñate. Possibilities of parallel computing in the finite element analysis of industrial forming processes. (2005) DOI 10.1007/3-540-62828-2_125
- E. Oñate, S. Idelsohn, M. Celigueta, R. Rossi, S. Latorre. Possibilities of the Particle Finite Element Method in Computational Mechanics. DOI 10.1007/978-3-642-05241-5_15
- E. Oñate, S. Idelsohn, M. Celigueta, R. Rossi, J. Marti, J. Carbonell, P. Ryzhakov, B. Suárez. Advances in the Particle Finite Element Method (PFEM) for Solving Coupled Problems in Engineering. (2011) DOI 10.1007/978-94-007-0735-1_1
- Y. Miyake, F. Miyasaka, S. Matsuzawa, S. Murao, K. Mitsufuji, S. Ogawa. Development of FSW Simulation Model-Effect of Tool Shape on Plastic Flow. DOI 10.1007/978-3-319-48173-9_30
- C. Devadas, D. Baragar, G. Ruddle, I. Samarasekera, E. Hawbolt. The thermal and metallurgical state of steel strip during hot rolling: Part II. Factors influencing rolling loads. MTA 22(2) DOI 10.1007/bf02656801
- A. Kumar, P. Jain, M. Mehta. Hot extrusion of aluminum powder at low reduction ratios: Analytical and metallographic studies. MTB 18(4) DOI 10.1007/bf02672887
- E. Oñate, M. Celigueta, S. Latorre, G. Casas, R. Rossi, J. Rojek. Lagrangian analysis of multiscale particulate flows with the particle finite element method. Comp. Part. Mech. 1(1) (2014) DOI 10.1007/s40571-014-0012-9
- J. Vilotte, M. Daignières, R. Madariaga. Numerical modeling of intraplate deformation: Simple mechanical models of continental collision. J. Geophys. Res. 87(B13) (2012) DOI 10.1029/jb087ib13p10709
- E. Oñate, C. Agelet de Saracibar. Numerical Modelling of Sheet-Metal-Forming Problems. DOI 10.1007/978-1-4471-1745-2_13
- R. Wood, J. Bonet. Finite-Element Analysis of the Superplastic Forming of Thin Sheet Components. DOI 10.1007/978-1-4471-1745-2_15
- C. Nielsen, W. Zhang, L. Alves, N. Bay, P. Martins. Coupled Finite Element Flow Formulation. (2012) DOI 10.1007/978-1-4471-4643-8_3
- J. Cesar de Sa. Numerical modelling of glass forming processes. Engineering Computations 3(4) DOI 10.1108/eb023666
- G. Belingardi, P. Calderale, G. Cozzari, F. Zingariello. An approach to sheet metal forming using discretization techniques. Engineering Computations 5(4) DOI 10.1108/eb023752
- E. DVORKIN, E. PETÖCZ. AN EFFECTIVE TECHNIQUE FOR MODELLING 2D METAL FORMING PROCESSES USING AN EULERIAN FORMULATION. Engineering Computations 10(4) DOI 10.1108/eb023911
- D. Banabic. FE-Models of the Sheet Metal Forming Processes. (2010) DOI 10.1007/978-3-540-88113-1_1
- S. Hwang, Y. Kang. Analysis of Flow and Heat Transfer in Twin-Roll Strip Casting by Finite Element Method. J. Eng. for Industry 117(3) DOI 10.1115/1.2804335
- M. Joun, H. Moon, R. Shivpuri. Automatic Simulation of a Sequence of Hot-Former Forging Processes by a Rigid-Thermoviscoplastic Finite Element Method. 120(4) (1998) DOI 10.1115/1.2807016
- P. Gudur, U. Dixit. A Combined Finite Element and Finite Difference Analysis of Cold Flat Rolling. 130(1) (2008) DOI 10.1115/1.2815342
- J. Wu, O. Dillon, W. Lu. Thermo-Viscoplastic Modeling of Machining Process Using a Mixed Finite Element Method. 118(4) (1996) DOI 10.1115/1.2831056
- J. Strenkowski, S. Athavale. A Partially Constrained Eulerian Orthogonal Cutting Model for Chip Control Tools. 119(4B) (1997) DOI 10.1115/1.2836809
- S. Zhang, J. Strenkowski. An Eulerian Orthogonal Cutting Model for Unidirectional Fiber-Reinforced Polymers. 140(2) (2018) DOI 10.1115/1.4038612
- M. Nourani, A. Milani, S. Yannacopoulos. A Review on Thermomechanical Models of Friction Stir Welding. AMR 922 (2014) DOI 10.4028/www.scientific.net/amr.922.553
- M. Sebastián, J. Pérez, A. Sánchez. Procedure of Mesh Data Generation in Codes for the Analysis of Viscous Flow. DOI 10.1007/978-3-662-02348-8_43
- J. Sprague, E. Eleftheriou, C. Bates. Non-Destructive Machinability Characterization of Materials Through a Correlation With Rate of Strain Sensitivity. 122(4) (1999) DOI 10.1115/1.1285902
Share this document
Keywords
claim authorship
Are you one of the authors of this document?