Latest revision as of 12:10, 10 June 2024

Abstract

SOCOTEC Spain, together with our partner GEM (Geotecnia y Exploraciones Marítimas), has been performing one of the largest geotechnical survey investigations in the development of new areas in the Port of Barcelona. This investigation includes multiple onshore and offshore tests including drilling and sampling, CPTU, and both in situ and laboratory testing. The CPTU (Cone Penetration Test with pore pressure measurement) is currently one of the most widely used in situ tests for soil characterization. Regarding the regularization of this test, all Standards specify the technical requirements of the equipment, the method of execution of the field test and the presentation of results and minimum corrections that have to be considered when performing and interpreting a CPTU. However, the current regulations do not refer to the methodology to be followed for the pre-drilling and/or re-drilling of the ground before a CPTU test, which is a common and operationally ‘standard’ procedure. In this sense, during the onsite research campaign, the results obtained in numerous onshore and offshore CPTU tests have been analyzed and, a variation in the pore pressure data recorded in the onshore CPTU tests associated with the pre-drilling and/or re-drilling operations has been identified. For this reason, the purpose of the paper is to highlight the need for a standardized procedure to execute this type of drilling operations and/or the necessary corrections to be taken into account during the interpretations of the results obtained in order to correct the anomalies associated with the injection of an artificial water flow.

Full Paper